Revit Beginners

AUGUST 19, 2009

We have one model that was started in Revit before we knew any of the limitations of Revit. The model is not clean enough to develop construction documents so we have passed along that task to another architect. ArchiCAD vs Revit. ► 2008. (7). David Duarte. at 3:06 PM. Labels: News , Phases , Practice. CAD Digest.

Revit 40

Revit CAD BIM nemetschek AllPlan 40

Revit Beginners

OCTOBER 25, 2006

Once you have your building(s) modelled start a new project. Link your building(s) into your new site model and adjust their elevation and orientation so they are properly located in the topography. While in your site model goto Tools. Save your site model. ArchiCAD vs Revit. Shared Coordinates. Manage Links.

Revit 40

Revit Site CAD BIM 40

Revit Beginners

JUNE 24, 2010

Having built a few parametric families, here is my experience: The dimensions that are variable or can flex need to be modeled before any actual geometry. ArchiCAD vs Revit. ► 2008. (7). Labels: Dimensions , Families , Parameters , Practice , Schedules. 1 comment: Aaron Ellsworth. Knowledge Base. Partner Products.

Revit 58

Revit CAD BIM nemetschek AllPlan 58

Revit Beginners

MARCH 21, 2007

Take a look around and youll find that Revit model data is being exported to other applications for many uses. Here is a short list of uses for which Revit model data is being exported. ArchiCAD vs Revit. ► 2008. (7). Evolution News. Knowledge Base. Partner Products. Product Activation. Request Manuals. CAD Digest.

Revit 40

Revit News CAD nemetschek AllPlan 40

Revit Beginners

AUGUST 3, 2010

build your as-built model in the existing phase. Once an as-built model is done you might want to archive a copy of the model just incase the design scope changes and you have to start all over again with a clean as-built. The model builder is going to have to do partial demolition of walls, floors, roofs, ceilings, etc.

Remodeling 49

Remodeling Revit BIM CAD 49

Revit Beginners

JULY 23, 2010

like the change is some new data for the model. I upgraded a model once, from Revit 2009 to Revit 2011, and an odd thing happened. This can reset data in the model. ArchiCAD vs Revit. ► 2008. (7). Im not talking about changing a value and then hitting the undo command. Let me give you some examples.

Revit 40

Revit CAD BIM Autodesk 40

Revit Beginners

OCTOBER 17, 2006

Laura Handler is a Building Information Modeller with Tocci Building Corporation. ArchiCAD vs Revit. ► 2008. (7). An ArchiCAD Blogger. Contractors are starting to take a serious look at the BIM movement. If youre curious about what theyre up to (bim) x is a new blog with a focus on BIM for contractors. David Duarte.

Revit 40

Revit BIM CAD nemetschek AllPlan 40

Revit Beginners

OCTOBER 26, 2006

Youll also find a Revit model of Calatravas Turning Torso project in Malmö, Sweden. See how it was modelled. Hello David, I want to use bar grating or grate lock or any kind of grade in the floor and the stairs in my revit model, if you know anyway could you please let me know? ArchiCAD vs Revit. ► 2008. (7).

Revit 40

Revit CAD BIM ArchiCAD 40

Revit Beginners

MARCH 28, 2008

Friday, March 28, 2008. It occured to me that I never once posted pictures of any project I worked on, so here are two images from a model I built back in Revit 4.5. We got our feet wet with 3D modeling and didnt try to do condocs until I was confident I could troubleshoot any Revit issues. ArchiCAD vs Revit. at 9:31 AM.

Revit 40

Revit CAD BIM Autodesk 40

Revit Beginners

APRIL 20, 2009

you can draw a simple building and link in a simple building (by shared coordinates) and move these two icons around a bit (clipped and unclipped) to see how the two models react or. ArchiCAD vs Revit. here is the simplest way I can put it: 1. There are now 3 coordinate systems in Revit. Clipping the Project Base Point. David Duarte.

Revit 40

Revit CAD BIM Autodesk 40

Revit Beginners

AUGUST 3, 2006

Do you ever accidentally drag a wall or other model object across the screen when you didnt intend to move it? It might be nice if Revit would let you pick and choose which model and annotation objects can be moved with the Press + Drag option. ArchiCAD vs Revit. ► 2008. (7). Thursday, August 03, 2006. Press + Drag.

Revit 40

Revit CAD nemetschek AllPlan BIM 40

Revit Beginners

DECEMBER 4, 2006

The Building Information Modelling/Management concept (its past, present, and likely future). And unique modelling, documenting, and implimenting methods utilized by others in the Revit community. ArchiCAD vs Revit. ► 2008. (7). I now have a better understanding of: 1. Knowledge Base. Partner Products. CAD Digest.

Revit 40

Revit CAD nemetschek AllPlan BIM 40

Revit Beginners

MARCH 5, 2007

Are you having trouble distinguishing detail lines from model lines in a view? Well, the easiest way to separate view specific content from model content in a view is to place a temporary filled region with a Solid Fill Pattern that covers the entire view (choose a neutral color). Display Model. ArchiCAD vs Revit.

Revit 40

Revit CAD BIM nemetschek AllPlan 40

Revit Beginners

MARCH 23, 2007

In an Architectural Record article " Getting on Board with Building Information Modeling " Larry Flynn describes a Data Manager as someone "responsible for coordinating the various computer files and models that are integrated into a BIM." In our office Data Managers are starting to inspect models for proper construction.

Revit 40

Revit Management CAD BIM 40

Revit Beginners

OCTOBER 19, 2006

It loaded viewing the model from the bottom of the floor, under the building. I tried to reload it and checked as many settings as I could in Revit to try and find out why the model loaded this way in Impression. ArchiCAD vs Revit. ► 2008. (7). An ArchiCAD Blogger. Got any ideas why this would happen?

Revit 40

Revit Autodesk CAD BIM 40

Revit Beginners

JANUARY 20, 2010

Some food for thought: Could it (read that as "it will") be better to let the walls be modeled as they will be built (with dead spaces in between), rather than using in-place walls that simply mimic old methodologies, like CAD or Hand drawn lines filled with poche or hatching? It is more suited to a model that is about graphics.

Revit 40

Revit CAD BIM Autodesk 40

Revit Beginners

AUGUST 21, 2006

This isnt necessarily a bad habit as long as they are using detail lines and not model lines (detail lines are view specific but model lines will show up everywhere). The Revit 3D model is just a place to start. ArchiCAD vs Revit. ► 2008. (7). Revit will start your drawings but you have to finish them.

Revit 40

Revit CAD BIM nemetschek AllPlan 40

Revit Beginners

DECEMBER 7, 2006

The more accurate the information in your Revit model the more you can do with it. Models from different consultants (who use software other than Revit to model) can be combined for analysis and clash detection. Design Review – Export Revit models into the DWF format for project managers to markup. Applications.

Revit 40

Revit Autodesk CAD BIM 40

Revit Beginners

OCTOBER 10, 2006

Weve noticed performance hits when modeling large topography surfaces and turning on shadows in any view. ArchiCAD vs Revit. ► 2008. (7). An ArchiCAD Blogger. Revit Performance. Because we do a lot of high-end residential design most of our projects are very detailed and put Revits performance to the test.

Revit 40

Revit CAD Autodesk BIM 40

Building Information Management

DECEMBER 2, 2012

Building information modeling (BIM) is beginning to fundamentally change the building industry in a very positive way. He is also FM Global’s representative to the buildingSMART alliance (serving as chairman since 2008) and The Open Geospatial Consortium (OGC). Monday and Tuesday: Board, Council and Committee Meetings.

BIM 45

BIM Conference Education CAD 45

Revit Beginners

SEPTEMBER 27, 2006

elevations, sections, 3D views, etc (similar to model lines) and youll have to adjust its visibility one view at a time. and Import your linked survey then it will export with the rest of your model to DWG format. The survey needs to be a part of the Revit model or Revit wont consider it when exporting your site plan to DWG.

Revit 40

Revit Site Plans CAD 40

Revit Beginners

JANUARY 13, 2007

Specify Coordinates at a point) While Spot Coordinates will report the coordinates of any model or drafting element it is not really clear in the help files that Spot Elevations will report the elevation of only certain parts of model elements. ArchiCAD vs Revit. ► 2008. (7). Knowledge Base. Partner Products.

Revit 40

Revit CAD BIM nemetschek AllPlan 40

Building Information Management

DECEMBER 2, 2012

Building information modeling (BIM) is beginning to fundamentally change the building industry in a very positive way. He is also FM Global’s representative to the buildingSMART alliance (serving as chairman since 2008) and The Open Geospatial Consortium (OGC). Monday and Tuesday: Board, Council and Committee Meetings.

BIM 40

BIM Conference Education CAD 40

Revit Beginners

SEPTEMBER 29, 2006

This might be one way to model a niche. ArchiCAD vs Revit. ► 2008. (7). This behavior may be automatic for some curtain walls (like the storefront curtain wall). Go to the Type Properties of a Curtain Wall and youll notice a parameter called Automatically Embed. David Duarte. at 10:57 PM. Labels: Walls. Newer Post.

Revit 40

Revit CAD nemetschek AllPlan nemetschek Vectorworks 40

Revit Beginners

SEPTEMBER 12, 2006

Did you model a rough opening height for your window that has say a sloping sill and now your head height is not accurate in your schedule? ArchiCAD vs Revit. ► 2008. (7). This blog will highlight some of the common questions and cool tips found in the process of transitioning our office to Revit. This is why. CAD Digest.

Revit 40

Revit CAD BIM nemetschek AllPlan 40

Revit Beginners

DECEMBER 5, 2006

ArchiCAD vs Revit. ► 2008. (7). For instance you can combine custom room schedules with color fill plans (drafting. Knowledge Base. Partner Products. Product Activation. Request Manuals. Revit Content Library. Subscription Center. Suggestion Box. Revit Forums & News. AECBytes Reviews. AUGI Revit Forum. CAD Digest. Revit Jobs.

Revit 40

Revit CAD nemetschek AllPlan BIM 40

Revit Beginners

SEPTEMBER 22, 2006

It has helped to model furniture familt easily. ArchiCAD vs Revit. ► 2008. (7). Open and youll see the same icons so you can add all your project directories too. David Duarte. at 9:55 AM. Labels: Families. 1 comment: manisha. This is great.b Thank you for a such an information. Post a Comment. Newer Post. Older Post.

Revit 40

Revit CAD nemetschek AllPlan BIM 40

Revit Beginners

JULY 22, 2006

We often have split level projects and weve had a lot of trouble isolating the stem walls and footings from the rest of the model for use in a foundation plan. In Visibility/Graphics go to Model Categories and uncheck everything except Detail Items and Walls. ArchiCAD vs Revit. ► 2008. (7). Saturday, July 22, 2006.

Revit 40

Revit Foundation Plans CAD 40

Revit Beginners

OCTOBER 4, 2006

When you model your geometry give it a material called "Variable" or some other material name that is not used in your project file. ArchiCAD vs Revit. ► 2008. (7). An ArchiCAD Blogger. Is there any way one can have a material that shows in a view an not in other. David Duarte. Yes you can. Knowledge Base.

Revit 40

Revit Materials CAD BIM 40

Revit Beginners

AUGUST 23, 2006

If you want to do cost estimating outside of Revit you might try exporting the Revit model as an ODBC and importing the database into Timberline. ArchiCAD vs Revit. ► 2008. (7). Only use Material Takeoff Schedules when you want to schedule every material that is used in the door/window family separately. David Duarte.

Revit 61

Revit Estimating CAD Schedule 61

Revit Beginners

OCTOBER 13, 2006

Now, making building pads, is normal to take so long to regenerate the model every time after I sketch a building pad, I am working in a doble cuore duo, 4gb Ram, but in 32 bits. ArchiCAD vs Revit. ► 2008. (7). An ArchiCAD Blogger. David Duarte. Knowledge Base. Partner Products. Product Activation. Request Manuals.

Revit 40

Revit CAD BIM Autodesk 40

Revit Beginners

JUNE 27, 2006

All of your model objects will initially reside in Workset 1. If you don’t initiate worksets early on you’re going to have to assign every model object to a workset after they’ve already been created and that can be a lot of unnecessary work. ArchiCAD vs Revit. ► 2008. (7). Knowledge Base.

Revit 40

Revit CAD BIM Autodesk 40