flexiblefullpage - default
Currently Reading

Desert Comfort: Innovative Measures Against the Elements

Advertisement
billboard - default
High-Performance Homes

Desert Comfort: Innovative Measures Against the Elements

The net-zero energy Desert Comfort Experience Home combines multiple solutions to protect the house from its extreme climate conditions


By Andrew Hunt June 2, 2022
SIPS installation on Desert Comfort Experience Home
The 8-by-24-foot, 1-foot-thick structural insulated panels (SIPs) were set in place as the roof deck in about a day.
This article first appeared in the May/June 2022 issue of Pro Builder.

A mix of structural, insulating, and weathertight innovations combine to create an extremely efficient thermal envelope for the Desert Comfort Experience Home, delivering energy efficiency and reliable indoor comfort in a harsh desert climate.

The 3,000-square-foot, net-zero custom home near Scottsdale, Ariz., uses insulated concrete forms (ICFs) to achieve R-30 perimeter walls. But because the expanded polystyrene foam of the ICFs can’t hold fasteners for a mechanically applied water resistive barrier, the team opted for a peel-and-stick membrane with a fiberglass lath mat that would accept three-coat stucco cladding and eliminate the cost and time of applying a separate lath layer.

Over the roof trusses, builder Brad Leavitt of A Finer Touch Construction, in Scottsdale, craned 8-by-24-foot-thick structural insulated panels (SIPs) to create a monolithic R-50 roof deck for the home’s modern, low-pitch lines and deep overhangs, finished with LP WeatherLogic sheathing and a reflective thermoplastic polyolefin (TPO) roof coating. The roof assembly also creates a conditioned attic within the supporting trusses for ducting, plumbing, and electrical runs. “Everything runs through that space,” Leavitt says.


RELATED


Between the SIPs and the trusses is a deck of LP Legacy sheathing panels, their seams and penetrations taped with either butyl or acrylic tape or treated with liquid-applied flashing. The latter enables complete coverage in complex areas such as inside corners, says Mark LaLiberte, president and co-founder of Construction Instruction, which is overseeing the project. “You can’t get tape to do that.” Leavitt also points out that it’s easier to train installers to properly apply the liquid-based product than the tape.

Completing the wall system are windows and patio doors from Bonelli Doors + Windows, a division of Pella Windows. The triple-glazed units have thermally broken aluminum frames and a U-value of 0.13 to 0.14, which is about 50% more efficient than what’s currently considered “high performance.”

Minimizing the window-to-wall ratio (WWR) is a well-known strategy for improving energy efficiency; homes built to Passive House standards often have less than 20% glass. But Desert Comfort achieves an astounding 60% WWR with fenestration that performs almost as well as an insulated 2-by-4 wall, LaLiberte says.

Strategic window placement also aids energy performance. Most of the glazing is on the north façade, where temperatures fluctuate less. And the home is oriented and designed to have few west-facing windows, while south-facing windows are placed high on the wall, close to overhangs that mitigate direct solar heat gain.

Both the windows and patio doors use Cardinal Glass Industries’ Neat+ Glass, which has a photoactive titanium dioxide coating that breaks down greenhouse gases and attracts less dust than conventional glass. “When you have that much glass and it makes up such a big part of the home’s aesthetic,” LaLiberte says, “you really have to knock it out of the park.” 


The Casita

In contrast to the main house, an accessory dwelling unit (ADU), or Casita, was built using a precut, preengineered lumber package. LP WeatherLogic sheathing was installed on the exterior walls to protect against seasonal monsoon rains, while LP FlameBlock fire-rated sheathing was used on the ADU’s desert-facing walls where wildfires are a potential hazard. DuPont’s Tyvek CommercialWrap (see photo, below) envelops the 800-square-foot Casita, while the wall cavities are insulated with either mineral wool or fiberglass batts and rigid mineral wool on the exterior side. The same peel-and-stick WRB used on the main home’s ICF walls will be installed prior to the stucco cladding application.

Desert Comfort Experience Home Tyvek wrap installation

RELATED


Desert Comfort Experience Home partners

 

Advertisement
leaderboard2 - default

Related Stories

Construction

5 Steps to Cracking the Code for a High-Performance Home

As a model of energy savings, water conservation, indoor comfort and health, and use of on-site renewable energy, The New American Home 2024 offers valuable lessons

Awards

DOE Awards Recognize Several NAHB Members for Home Performance Innovation

National Association of Home Builders members are among the winners in this year's U.S. Department of Energy Housing Innovation Awards  

Products

Explore the Products Used to Create the Desert Comfort Idea Home

The custom home in Arizona’s Sonoran Desert set some ambitious net zero home-performance goals. These building products help to meet them

Advertisement
boombox1 -
Advertisement
native1 - default
halfpage2 -

More in Category

Delaware-based Schell Brothers, our 2023 Builder of the Year, brings a refreshing approach to delivering homes and measuring success with an overriding mission of happiness

NAHB Chairman's Message: In a challenging business environment for home builders, and with higher housing costs for families, the National Association of Home Builders is working to help home builders better meet the nation's housing needs

Sure there are challenges, but overall, Pro Builder's annual Housing Forecast Survey finds home builders are optimistic about the coming year

Advertisement
native2 - default
Advertisement
halfpage1 -

Create an account

By creating an account, you agree to Pro Builder's terms of service and privacy policy.


Daily Feed Newsletter

Get Pro Builder in your inbox

Each day, Pro Builder's editors assemble the latest breaking industry news, hottest trends, and most relevant research, delivered to your inbox.

Save the stories you care about

Lorem ipsum dolor sit amet lorem ipsum dolor sit amet lorem ipsum dolor sit amet.

The bookmark icon allows you to save any story to your account to read it later
Tap it once to save, and tap it again to unsave

It looks like you’re using an ad-blocker!

Pro Builder is an advertisting supported site and we noticed you have ad-blocking enabled in your browser. There are two ways you can keep reading:

Disable your ad-blocker
Disable now
Subscribe to Pro Builder
Subscribe
Already a member? Sign in
Become a Member

Subscribe to Pro Builder for unlimited access

Lorem ipsum dolor sit amet, consectetur adipisicing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua.