To some project teams, “daylighting” means using glass area to admit direct sunlight, period. Yet there are better approaches to illuminating building interiors. Often, the sun’s direct rays are the last thing you need for effective daylighting.
Sunlight comes with high solar heat gain—measured as solar heat gain coefficient (SHGC) for various types of glazing and translucent materials—and can lead to glare, occupant thermal discomfort, and material degradation caused by ultraviolet (UV) light.
Building occupants and owners want useful, uniform light, not high-contrast or high-heat sources, according to surveys like the seminal study led by the University of Washington (https://tinyurl.com/zhpx7h3). That’s why controlled and redirected sunlight almost always provides the best approach, while direct rays may be counted among the least desirable techniques.
Building surfaces and enclosures receiving direct sunlight need solar control systems, including shading devices such as overhangs and fins that may be opaque or translucent, solid or louvered, according to the Best Practices Manual published by the Collaborative for
High Performance Schools. Canopies, window films, and insulated glazing units (IGUs) with internal louvers may also be required. Façades and areas facing north, on the other hand, need ways to maximize daylight harvest.
After reading this article, you should be able to:
+ Discuss the benefits and ideal kinds of daylighting illumination desired for such interiors as workplaces, libraries, and museums.
+ Describe the types of enclosure technologies and wholebuilding design approaches for maximizing beneficial daylighting.
+ List techniques for improving daylighting performance.
+ Compare the methods or materials commonly used in daylighting applications.
TAKE THIS FREE AIA COURSE AT BDCUNIVERSITY.COM
Related Stories
Retail Centers | May 3, 2024
Outside Las Vegas, two unused office buildings will be turned into an open-air retail development
In Henderson, Nev., a city roughly 15 miles southeast of Las Vegas, 100,000 sf of unused office space will be turned into an open-air retail development called The Cliff. The $30 million adaptive reuse development will convert the site’s two office buildings into a destination for retail stores, chef-driven restaurants, and community entertainment.
Codes and Standards | May 3, 2024
New York City considering bill to prevent building collapses
The New York City Council is considering a proposed law with the goal of preventing building collapses. The Billingsley Structural Integrity Act is a response to the collapse of 1915 Billingsley Terrace in the Bronx last December.
Architects | May 2, 2024
Emerging considerations in inclusive design
Design elements that consider a diverse population of users make lives better. When it comes to wayfinding, some factors will remain consistent—including accessibility and legibility.
K-12 Schools | Apr 30, 2024
Fully electric Oregon elementary school aims for resilience with microgrid design
The River Grove Elementary School in Oregon was designed for net-zero carbon and resiliency to seismic events, storms, and wildfire. The roughly 82,000-sf school in a Portland suburb will feature a microgrid—a small-scale power grid that operates independently from the area’s electric grid.
AEC Tech | Apr 30, 2024
Lack of organizational readiness is biggest hurdle to artificial intelligence adoption
Managers of companies in the industrial sector, including construction, have bought the hype of artificial intelligence (AI) as a transformative technology, but their organizations are not ready to realize its promise, according to research from IFS, a global cloud enterprise software company. An IFS survey of 1,700 senior decision-makers found that 84% of executives anticipate massive organizational benefits from AI.
Codes and Standards | Apr 30, 2024
Updated document details methods of testing fenestration for exterior walls
The Fenestration and Glazing Industry Alliance (FGIA) updated a document serving a recommended practice for determining test methodology for laboratory and field testing of exterior wall systems. The document pertains to products covered by an AAMA standard such as curtain walls, storefronts, window walls, and sloped glazing. AAMA 501-24, Methods of Test for Exterior Walls was last updated in 2015.
MFPRO+ News | Apr 29, 2024
World’s largest 3D printer could create entire neighborhoods
The University of Maine recently unveiled the world’s largest 3D printer said to be able to create entire neighborhoods. The machine is four times larger than a preceding model that was first tested in 2019. The older model was used to create a 600 sf single-family home made of recyclable wood fiber and bio-resin materials.
K-12 Schools | Apr 29, 2024
Tomorrow's classrooms: Designing schools for the digital age
In a world where technology’s rapid pace has reshaped how we live, work, and communicate, it should be no surprise that it’s also changing the PreK-12 education landscape.
Adaptive Reuse | Apr 29, 2024
6 characteristics of a successful adaptive reuse conversion
In the continuous battle against housing shortages and the surplus of vacant buildings, developers are turning their attention to the viability of adaptive reuse for their properties.
AEC Innovators | Apr 26, 2024
National Institute of Building Sciences announces Building Innovation 2024 schedule
The National Institute of Building Sciences is hosting its annual Building Innovation conference, May 22-24 at the Capital Hilton in Washington, D.C. BI2024 brings together everyone who impacts the built environment: government agencies, contractors, the private sector, architects, scientists, and more.