Viewpoint Construction Technology

JANUARY 31, 2018

As a contractor, the thought of an OSHA inspection and possible violations probably makes you a little nervous. The government doesn’t take incidents like this lightly, as evidenced by the fact that the cost of penalties levied by the Occupational Safety and Health Administration (OSHA) is rising. Safety is a serious matter.

OSHA 211

OSHA Inspections Viewpoint Safety 211

Safety Services Company

JUNE 11, 2021

In recent years, many companies have started to realize the importance of building a strong safety culture within their workplace. The term “safety culture” can be defined as a company’s values, attitudes and beliefs about safety. We all must make safety a priority. Characteristics of a Strong Safety Culture.

Safety 62

Safety Accidents Injury Organization 62

Levelset

NOVEMBER 10, 2022

In this article, we’ll explore the most common jobsite safety risks — and what contractors can do to improve safety for all parties involved. . Common jobsite safety risks. According to the Occupational Safety and Health Administration (OSHA), almost 3 out of 100 full-time workers were injured on the job in 2019.

Safety 52

Safety Site Injury Construction 52

Viewpoint Construction Technology

JULY 12, 2018

If you work in construction, you’re familiar the Occupational Safety and Health Administration (OSHA), whose standards regulate safety on the nation’s construction sites. We’ve seen a rise in OSHA fines and even criminal charges related to safety incidents recently. Compliance management is no small task.

OSHA 221

OSHA Certification Safety Software 221

Safety Services Company

SEPTEMBER 23, 2014

Too often companies are told that they need to have a safety manual to protect them from OSHA violations, and while that’s true, understanding how that works is just as informative to a safely run company as having all the right words and regulations in a policy. Do you inspect the worksite and enforce the policy?

Inspections 48

Inspections Safety Defense Documentation 48

Best Practices Construction Law

NOVEMBER 11, 2013

Police and fire investigators have determined that the truck driver’s death was a workplace accident and not a crime. Examples like this are good reminders of the lessons to learn when investigating or handling an accident on a construction site. These include: Prepare before the accident. Manage the accident documents.

Accidents 86

Accidents San Francisco Site OSHA 86

Safety Services Company

APRIL 5, 2018

OSHA Safety & Compliance. Welcome to Safe Friday, this week we’re going to cover the ins and outs of OSHA safety and compliance. OSHA Inspections. Workplace inspections and investigations are conducted by OSHA compliance safety and health officers trained in safety and industrial hygiene. Walkthrough.

OSHA 48

OSHA Safety Inspections Employment 48

Safety Services Company

JANUARY 7, 2014

The nature of a workplace accident will determine the extent of the investigation, the resources that will be needed, what types of investigative processes will be required, and who will need to be interviewed. Review Existing Documentation. To do that you must first secure the accident scene. Review Existing Documentation.

Accidents 63

Accidents Documentation Safety Security 63

Safety Services Company

FEBRUARY 23, 2018

Workplace Safety. Welcome to Safe Friday, this week we’re going to cover workplace safety. Freedom from danger is a wonderful concept, but to make that goal a reality requires considerable planning, training, commitment, management skills, and above all THINKING about workplace safety. Thinking About Workplace Safety.

Safety 48

Safety Accidents Equipment OSHA 48

Safety Services Company

JANUARY 7, 2014

The nature of a workplace accident will determine the extent of the investigation, the resources that will be needed, what types of investigative processes will be required, and who will need to be interviewed. Review Existing Documentation. To do that you must first secure the accident scene. Review Existing Documentation.

Accidents 59

Accidents Documentation Safety Security 59

Constructonomics

JULY 15, 2011

Moving heavy loads around a work environment demands careful attention to safety. Accidents can take a hefty toll in life, limb, and material damages. A fundamental knowledge of inspection, maintenance, and operating procedures can make the difference been smooth operation and a tragic mishap. THE EQUIPMENT. THE HUMAN ELEMENT.

Safety 158

Safety Overhead Inspections Accidents 158

Levelset

SEPTEMBER 19, 2022

Safety is a contractor’s number one priority. A job safety analysis, also called a JSA, identifies potentially hazardous tasks and provides controls to mitigate or eliminate those hazards. What is a job safety analysis (JSA)? What is a job safety analysis (JSA)? Who is responsible for completing a JSA form?

Safety 52

Safety Accidents OSHA Injury 52

Best Practices Construction Law

FEBRUARY 20, 2013

" While the explosion in Kansas does not appear to have involved an accident at a construction site, early reports do indicate that the cause may have been a contractor performing underground work that struck a gas line. In any event, there are some lessons to learn when investigating or handling an accident on a construction site.

Accidents 48

Accidents Site Kansas City Kansas 48

FDR Safety

MARCH 4, 2015

As outlined in an article by Rod Smith and his colleagues at the Sherman Howard law firm, once an initial report is received, OSHA will get back to the employer with a questionnaire that asks the cause of the accident and whether similar accidents have occurred before. An on-site inspection will be automatic. Temporary workers.

OSHA 120

OSHA Inspections Employment Accidents 120

Construction Cost Estimating

AUGUST 15, 2018

Accidents throughout the construction process can also lead to personal injuries and greater costs. Indirect costs related to insurance, inspection and regulation are also raised significantly because of these inflated direct costs. The construction cost is raised and construction delays occur.

Safety 40

Safety Accidents Inspections Construction 40

Best Practices Construction Law

NOVEMBER 11, 2013

Police and fire investigators have determined that the truck driver''s death was a workplace accident and not a crime. Examples like this are good reminders of the lessons to learn when investigating or handling an accident on a construction site. These include: Prepare before the accident. Organize post-accident activities.

Accidents 48

Accidents San Francisco Site OSHA 48

Safety Services Company

MARCH 16, 2018

How to Promote Employee Safety in the Workplace. Welcome to Safe Friday, this week we’re going to cover employee safety. On the job safety is a program of proactive participation between employers, supervisors, and employees; safety is everyone’s business. Everyone needs to be involved in company safety.

Safety 48

Safety OSHA Equipment Education 48

FDR Safety

SEPTEMBER 22, 2015

7 Tips for Building a Strong Contractor Safety Program. See you at the National Safety Council Congress. 7 Tips for Building a Strong Contractor Safety Program. Require that contractors provide you with documentation of their safety performance and safety program. Review the documentation.

Safety 120

Safety Injury Inspections Documentation 120

FDR Safety

JANUARY 16, 2020

If you are targeted for an inspection, the CSHO will look for machinery or equipment associated with amputations paying particular attention to employee exposure to nip points, pinch points, shear points, cutting actions, and other points of operation. For more advice on safety, please call us at (615) 628-8746.

OSHA 120

OSHA Inspections Safety Equipment 120

FDR Safety

MARCH 21, 2013

The bottom line is that the majority of accidents are not due to a lack of training, skill or knowledge — they are simply related to poor decision-making. First thoughts about safety. First thoughts about safety. Many companies establish safety as a “No. Many companies establish safety as a “No. 1” priority.

Safety 136

Safety Accounting Injury Accidents 136

FDR Safety

MAY 19, 2016

Thanks to a new OSHA recordkeeping rule, employers urgently need to take a close look at their employee handbooks, safety policies and procedures, safety incentive programs, and drug testing policies. Under it, employee complaints of retaliation can now be investigated in the same way as any other alleged safety violation.

OSHA 195

OSHA Employment Injury Safety 195

Construction Marketing

NOVEMBER 25, 2014

It takes an average of 18 minutes to find a paper document, and a whopping 70 percent of businesses would fail in three weeks if they had a catastrophic loss of paper due to a fire or flood. Site Inspections. Paper forms can produce several vulnerabilities and inefficiencies for site inspections.

Mobility 233

Mobility Inspections Construction Safety 233

The Constructor

JANUARY 29, 2012

This leads to the presentation of an Information Technology IT tool for construction project safety management Total-Safety and, in particular, a module within Total-Safety designed to help construction personnel develop method statements with improved levels of hazard identification.

Safety 114

Safety Construction Concrete Foundation 114

Safety Services Company

MARCH 5, 2014

To accomplish this, OSHA has started an initiative including releasing training information and creating alliances with staffing agencies to provide safety training information. Instructors are also instructed to assess during inspections and investigations whether employees are temporary and have received required training.

OSHA 48

OSHA Safety Injury Inspections 48

FDR Safety

JULY 25, 2018

Without a documented procedure, a serious injury is waiting to occur. Why wait for an OSHA inspection to occur before taking action? Call me… A few minutes of discussion could possibly improve your safety program and LOTO procedures. Jim Stanley is one of the nation’s most respected occupational safety consultants.

Employment 120

Employment OSHA Feasibility Safety 120

Lets Build

APRIL 15, 2020

Once feasibility is determined and all stakeholders and parties agree to advance the project, a project charter or project initiation document (PID) is then created, which includes the business case and the business needs. Are all contract documents signed? The PMP also archives baselines for scope, cost, and schedule.

Project Management 148

Project Management Management Construction Feasibility 148

Safety Services Company

JUNE 13, 2024

In June, as we celebrate National Safety Month 2024 , it’s imperative to acknowledge the strides made in safety technology within industries like construction, oil, and gas. However, despite the many advancements, challenges persist in ensuring the safety of our workforce. It’s time to rewrite these narratives.

Risk 62

Risk Safety Management Injury 62

Fieldwire

JANUARY 11, 2023

Preventing accidents and reducing risk exposure The safety of construction site workers is always a priority for construction companies – and there is a lot to improve. It is important to keep your teams up-to-date with the latest guidelines, and also to perform safety audits. According to the U.S.

Safety 52

Safety Accidents Injury Software 52

Autodesk Construction Cloud

JULY 13, 2021

For example, companies like Newmetrix use image recognition to scan jobsite photos and flag safety concerns. Driving Better Safety Oversight . Safety management is by no means a new concept. Through internal research, we found out that over 70% of RFIs stem from design or documentation issues. Reducing Design Risk .

Risk 52

Risk Construction Autodesk Safety 52

Pro Builder

AUGUST 5, 2022

Construction Jobsite Safety: Strategies and Resources for Worker Well-Being. Jobsite safety is critical for workers and for your home building company. More than half of that spending (56%) went toward safety education, a sign that construction remains a potentially dangerous job. Fri, 08/05/2022 - 07:00.

Safety 72

Safety Resource Injury Construction 72

Safety Services Company

OCTOBER 22, 2012

This article was written by Safety Consultants with Safety Services Company , we provide Construction, Manufacturing, and General Industry Safety Programs to over 100,000 clients across the United States and Canada. For more information on a custom safety program for your company, please contact us by clicking here.

OSHA 49

OSHA Inspections Los Angeles Safety 49

Lets Build

MAY 19, 2023

More importantly, poor-quality construction impacts the project’s safety. It also provides a quality control checklist to simplify the inspection process and ensure every aspect of the project has been checked. This is vital to ensure everyone is on the same page regarding safety standards, compliance, policy, and project expectations.

Management 141

Management Inspections Construction Plans 141

Safety Services Company

NOVEMBER 29, 2012

This article was written by Safety Consultants with Safety Services Company , we provide Construction, Manufacturing, and General Industry Safety Programs to over 100,000 clients across the United States and Canada. For more information on a custom safety program for your company, please contact us by clicking here.

Ohio 48

Ohio OSHA Inspections Safety 48

Safety Services Company

JUNE 21, 2018

Welcome to Safe Friday, since June is National Safety Month, this week we’re going to cover the ins and outs of OSHA fall protection. Poor training, carelessness, inattention, not implementing the necessary safeguards and not wearing the right PPE are the primary causes of on-the-job accidents. OSHA Fall Protection.

OSHA 48

OSHA Injury Safety Equipment 48

Safety Services Company

JUNE 21, 2018

Welcome to Safe Friday, since June is National Safety Month, this week we’re going to cover the ins and outs of OSHA fall protection. Poor training, carelessness, inattention, not implementing the necessary safeguards and not wearing the right PPE are the primary causes of on-the-job accidents. OSHA Fall Protection.

OSHA 48

OSHA Injury Safety Equipment 48

Safety Services Company

MAY 10, 2018

Safety Programs. Welcome to Safe Friday, this week we’re going continue to cover the ins and outs of Safety Programs. This week, we're going cover the ins and outs of what should be included in your workplace safety program. Establishing Safety Programs. Attending all required safety programs and health meetings.

Safety 48

Safety Injury Inspections OSHA 48

Safety Services Company

NOVEMBER 19, 2012

This article was written by Safety Consultants with Safety Services Company , we provide Construction, Manufacturing, and General Industry Safety Programs to over 100,000 clients across the United States and Canada. For more information on a custom safety program for your company, please contact us by clicking here.

Safety 71

Safety OSHA Employment Plans 71