Autodesk Construction Cloud

JANUARY 10, 2024

Within five years, I exclusively used Autodesk’s Revit to deliver all my architectural designs. I would say that working on a sustainability-focused project, from an architectural point of view, is not very different from working on a normal construction project. I learned a great deal about the whole BIM process there.

BIM 119

BIM Management Design Autodesk 119

Pro Builder

JULY 14, 2021

For an increasing number of them, this transition entails moving from two-dimensional (2D) drawings to three-dimensional (3D) digital modeling. As such, builders can greatly reduce the typical communication challenges they face coordinating projects among clients, engineers, architects, contractors, site crews, and other stakeholders.

Modeling 105

Modeling Sketchup Drawings Visualization 105

Construction Cost Estimating

AUGUST 29, 2018

EdiLus-RC is an exclusive software for making perfect concrete design that deals with structural calculations toward new and subsisting buildings in reinforced concrete by means of the most simple and effective SMART BIM object input. The first structural calculations BIM software for reinforced concrete buildings.

Software 40

Software Software Concrete Design 40

DebunkTheBIM

NOVEMBER 2, 2011

The structural engineer sizes the concrete column; the architect places it in the space. There is a code on the structural drawing that can be tracked to the schedule and the dimensions are noted. The architectural plan neatly sets out the column’s centre point from two nearby, perpendicular grids.

Structural Engineering 48

Structural Engineering CAD BIM Modeling 48

The Constructor

NOVEMBER 19, 2011

Even experience in extensive design in academic context can provide only limited perspective in engineering decision making. Most lessons in engineering decision making come from the cases of histories of failures of structures, which itself are the results of a bad judgement, thus making us understand the pitfalls in conceptual design.

Concrete 177

Concrete Foundation Engineering Design 177

BIM & Beam

JUNE 29, 2015

ABT Netherlands, a multi-disciplinary consultancy firm, focused on the structural engineering, civil engineering, architectural engineering, moved to BIM-based 3D rebar for concrete reinforced design and fabrication as a result of client demand. They offer a full range of civil engineering and design services.

Revit 40

Revit BIM Autodesk Modeling 40

Natural Building

JULY 27, 2008

Green Home Building and Sustainable Architecture. Sustainable architecture is an exciting and important field, with many people reviving traditional methods of building and others creating innovations to established practices. Tulou Chinese Architecture. This is a paragraph of text that could go in the sidebar. -->.

Architecture 53

Architecture Sustainability Green Defense 53

Natural Building

DECEMBER 24, 2019

She called up her structural engineer on an educational-building project and asked if they could swap out some of the cement in their mix for fly ash. Katie MacDonald finds new uses for structural bamboo; she holds a panel of cross-laminated bamboo. He was game to try it in the foundation. Now, that is scale.’”.

Materials 52

Materials Design Concrete Accounting 52

CivilJungle

FEBRUARY 27, 2021

Windows are often arranged, also for the purposes of architectural decoration. A lintel is a structural horizontal block that spans the space or opening between two vertical supports. It can be a decorative architectural element or a combined ornamented structural item. The windows are an essential part of the house.

Foundation 52

Foundation Construction Drawings Housing 52

Civil Engi

FEBRUARY 27, 2021

These free measurement apps are very useful for civil engineers, Architects, Interior designers, real estate brokers, and students. You can easily draw polygons and measure distances, perimeters, and areas over Google Maps. Top 5 Amazing Free Measurement App in the year 2021. Also, the people who need to take any kind of measurements.

Mobility 52

Mobility Engineering AutoCAD CAD 52

Revit OpEd

OCTOBER 16, 2013

It''s a fairly common practice to create separate floors for structure and finishes. The structural "layer" of a floor may actually be modeled by the structural consultant, assuming the structural engineer we are working with uses Revit and isn''t working directly in the same model with us (architecture bias in this post).

Drawings 53

Drawings Revit Modeling Documentation 53

CivilJungle

JANUARY 6, 2021

The owner of the example of steel structure is PEB building. In this article, you will get to know about pre-engineered buildings, its components , advantages and disadvantages. The PEB full form is Pre-Engineered Buildings. Pre-engineered buildings at transport it an assembled at site with bolted connections.

Engineering 52

Engineering Fabrication Design Industrial 52

Do

SEPTEMBER 2, 2012

My journal of work in Revit as part of a 600+ member architecture firm. I particularly like how he separates "Architectural" drawing into three distinct categories. I didnt print something out, draw on it, scan it and e-mail it, nor did I just draw something from scratch. skip to main | skip to sidebar. at 1:35 PM.

Revit 51

Revit Drawings BIM Vermont 51

CivilJungle

MARCH 6, 2021

Stones were some of the essential construction materials in civil engineering. The mineral is a material produced by an inorganic materials mechanism which exhibits a distinct chemical composition, including molecular structure. Stones are used for the ornamental and architectural beauty of different types of structures.

Foundation 52

Foundation Materials Concrete Drawings 52

Building Information Management

AUGUST 30, 2013

A designer’s primary interest is for example the spatial structure, a structural engineer’s primary interest is the load bearing structure, while an energy engineer is interested in climate zones. This role follows from the partners’ primary interest, and results in a specific view on the building.

BIM 65

BIM Modeling Autodesk Estimating 65

Autodesk Construction Cloud

AUGUST 15, 2023

As we know, construction teams go through a lot of paper—much of that is used to print drawings, mark up documents, and the like. Her extensive experience in program management, risk assessment, and cost analysis has made her instrumental in expanding the Engineering, Procurement, and Construction Management (EPCM) Program for Pond.

Autodesk 52

Autodesk Construction Innovation BIM 52

CAD Shack

DECEMBER 24, 2009

You know this if you have tried adding a ceiling grid with Revit Structure, duct with Revit Architecture, or structural steel with Revit MEP. This week I needed to create some structure from the structural engineers AutoCAD plans since they were not using Revit. The MEP CAD Engineer. Newer Post.

CAD 40

CAD Revit AutoCAD Autodesk 40

Revit OpEd

FEBRUARY 4, 2011

You" (an architecture firm) start your project without a reliable survey. Draw the concept so it is easy to put on paper, on a printed sheet. Doesn't matter if it is angled or new fangled, just orient it so it is "easy" to draw. Let's assume you decide to hire a structural engineer (and MEP) and they use Revit too.

Revit 56

Revit Modeling Site Documentation 56

Buisness Facilities Contributed Content

AUGUST 28, 2013

Dennis Poon, vice chairman of the Thornton Tomasetti architectural firm and chief structural engineer of some of Asia’s tallest buildings, told The New York Times that Zhang’s design is feasible but has significant drawbacks.

New York 53

New York Feasibility Structural Engineering Fabrication 53

BIM & Beam

AUGUST 1, 2018

This is the third blog post in a series that discusses the advantages of working on concrete projects in a BIM process for structural engineers. Segmentation is dictated by engineering, architectural, or fabrication requirements, and its reinforcement is determined by the structural engineer.

Modeling 75

Modeling BIM Concrete Design 75

CivilJungle

AUGUST 18, 2022

Also Read, How to Draw a House Plan Step by Step. In architecture, an arch is an opening in a structure that is curved on top and designed to distribute weight. If you want to become a building architect or a designer, you will learn the four basic elements of architecture and design: Point, Line, Plane and Volume.

St. Louis 52

St. Louis Structural Engineering Site Architecture 52

Building Information Management

JULY 26, 2012

360 Architecture. 4240 architecture. Affiliated Engineers, Inc. AHA Consulting Engineers, Inc. Albertin Vernon Architecture LLC. Alfandre Architecture, PC. Alpar Architectural Products. Campagna/Architecture + Planning PLLC. Bath Engineering Corporation. Bork Architectural Design, Inc.

Consulting 55

Consulting Green Architecture Sustainability 55

Autodesk Construction Cloud

NOVEMBER 12, 2021

However, it is also common for architecture and engineering, as well as general contracting firms, to struggle with precise and timely communication of changes. The structural engineer on the same project decided to change the floor slabs, reducing them from 20 to 10cm from the façade edge because less space was needed for rebar.

Management 52

Management Autodesk BIM Modeling 52

Autodesk Construction Cloud

JUNE 27, 2023

Architects, MEP engineers, and structural engineers often independently create models during the design process. So once a design decision is made, architects and engineers can see the impact of the change in real-time. Clash detection has been around for some time. What are the benefits of BIM clash detection?

BIM 52

BIM Autodesk Modeling Schedule 52

CivilJungle

FEBRUARY 24, 2021

A load-bearing wall is a wall that is an active functional structure of a building, which carries the weight of the building above it, then transfers the total weight to the foundation structure beneath it. Also, Read: What Is Superstructures | Difference Between Load-Bearing and Framed Structures.

Construction 52

Construction Housing Concrete Foundation 52

Autodesk Construction Cloud

NOVEMBER 2, 2021

Sarah Watte , Phoenix Civil Engineering, Inc. Jonathon started as a Project Engineer at Barton Malow and worked his way up to Vice President in just 10 years. Giana started her career in civil and structural engineering, working on both domestic and international programs. Eoin Prunty , O’Mahony Pike Architects.

Construction 52

Construction BIM San Francisco Management 52

Job Order Contracting

JANUARY 13, 2017

ACF: Architectural Concrete Finish. ADAAG: Americans with Disabilities Act Architectural Guidelines. AIEE: American Institute of Electrical Engineers. ARCH: Architect, Architectural. ASCE: American Society of Civil Engineers. ASME: American Society of Mechanical Engineers. DWG: Drawing. & And.

Construction 100

Construction Concrete Electrical Fabrication 100

Building Information Management

JULY 2, 2012

Open information exchange of Heating, Ventilating and Cooling systems (HVACie), released by the Engineer Research and Development Center for public review. HVACie extends the existing Industry Foundation Class Coordination View including equipment and system information streamlining construction shop drawing and fabrication.

Documentation 40

Documentation Equipment Modeling Design 40

Building Information Management

JULY 2, 2012

Open information exchange of Heating, Ventilating and Cooling systems (HVACie), released by the Engineer Research and Development Center for public review. HVACie extends the existing Industry Foundation Class Coordination View including equipment and system information streamlining construction shop drawing and fabrication.

Documentation 40

Documentation Equipment Modeling Design 40

Revit OpEd

APRIL 14, 2016

In Architectural and Coordination discipline views this allows you to apply a gradient override to make it more obvious which elements are farthest away compared to the elements that are closest to the cut plane of the view. Occlusion Culling (2016R2) - The Graphics tab in the Options dialog offers the new setting: Draw visible elements only.

Revit 40

Revit Fabrication Schedule Modeling 40

Building Information Management

JULY 26, 2016

ACF: Architectural Concrete Finish. ADAAG: Americans with Disabilities Act Architectural Guidelines. AIEE: American Institute of Electrical Engineers. ARCH: Architect, Architectural. ASCE: American Society of Civil Engineers. ASME: American Society of Mechanical Engineers. DWG: Drawing. ENG: Engineer.

Construction 40

Construction Concrete Electrical Fabrication 40

Building Information Management

JULY 26, 2016

ACF: Architectural Concrete Finish. ADAAG: Americans with Disabilities Act Architectural Guidelines. AIEE: American Institute of Electrical Engineers. ARCH: Architect, Architectural. ASCE: American Society of Civil Engineers. ASME: American Society of Mechanical Engineers. DWG: Drawing. ENG: Engineer.

Construction 40

Construction Concrete Electrical Fabrication 40