Revit Beginners

JULY 31, 2009

Always Be Phase Aware In every project file your modeled components have a phase created and a phase demolished parameter whether you like it or not. If you place a model component in a view that is set to the New Construction phase (under View Properties), that component automatically gets placed in the New Construction phase.

Revit 40

Revit CAD BIM nemetschek AllPlan 40

Revit Beginners

NOVEMBER 11, 2008

You just linked a developed Revit model into a new project file and you cant seem to find it. If I just imported a project and I cant seem to locate the imported model the first thing I do is setup my radar. Open each view individually and zoom all (ZA) until you find the model you are looking for. National BIM Standards.

Revit 40

Revit CAD nemetschek AllPlan BIM 40

Revit Beginners

JUNE 24, 2010

Having built a few parametric families, here is my experience: The dimensions that are variable or can flex need to be modeled before any actual geometry. We design traditional, high-end residential work. National BIM Standards. GSA BIM Resource. BIM & BEAM. BIM Videos. Marathon Drafting. CAD vs BIM.

Revit 58

Revit CAD BIM nemetschek AllPlan 58

Revit Beginners

AUGUST 19, 2009

We have one model that was started in Revit before we knew any of the limitations of Revit. The model is not clean enough to develop construction documents so we have passed along that task to another architect. We design traditional, high-end residential work. National BIM Standards. GSA BIM Resource. BIM & BEAM.

Revit 40

Revit CAD BIM nemetschek AllPlan 40

Revit Beginners

AUGUST 21, 2006

Using Revits 2D Drafting tools: Because beginners are not completely familiar with all of Revits tools and because they are often faced with a deadline, beginners will likely rely on detail lines and filled regions to piece together plans, sections, and elevations for their first few projects. The Revit 3D model is just a place to start.

Revit 40

Revit CAD BIM nemetschek AllPlan 40

Revit Beginners

JULY 23, 2010

like the change is some new data for the model. I upgraded a model once, from Revit 2009 to Revit 2011, and an odd thing happened. This can reset data in the model. Hmm, luckily, I haven't stumbled into any of those demons yet, but then again, I did just barely start into this BIM software stuff. GSA BIM Resource.

Revit 40

Revit CAD BIM Autodesk 40

Revit Beginners

JANUARY 20, 2010

First off (before you get upset at my comments) You guys are doing great work for Revit and BIM!!! I completely understand the desire to replicate your graphic standards and the like but in-place families mostly detract from a BIM, rather than add to them. Plus in-place families detract from performance of the team, model and file.

Revit 40

Revit CAD BIM Autodesk 40

Revit Beginners

JUNE 27, 2008

How do you model the roof and ridge roll? How do you model the roof such that the roof tile is all in 3D? If you want to 3d model all the roof tiles there is a shortcut posted on AUGI using sloped glazing. We design traditional, high-end residential work. National BIM Standards. GSA BIM Resource. BIM & BEAM.

Revit 40

Revit CAD nemetschek AllPlan BIM 40

Revit Beginners

OCTOBER 26, 2006

Edward Borg of Precision Drafting LLC has a dedicated FTP site for sharing cool Revit Project Templates and Families. Youll also find a Revit model of Calatravas Turning Torso project in Malmö, Sweden. See how it was modelled. We design traditional, high-end residential work. National BIM Standards. BIM & BEAM.

Revit 40

Revit CAD BIM ArchiCAD 40

Revit Beginners

SEPTEMBER 4, 2008

We design traditional, high-end residential work. National BIM Standards. GSA BIM Resource. BIM & BEAM. BIM Videos. Marathon Drafting. All Things BIM. CAD vs BIM. HOK Green BIM. Other BIM Software. BIM Conferences. Journal of Building Information Modeling.

Revit 40

Revit CAD nemetschek AllPlan nemetschek Vectorworks 40

Revit Beginners

MARCH 21, 2007

Take a look around and youll find that Revit model data is being exported to other applications for many uses. Here is a short list of uses for which Revit model data is being exported. We design traditional, high-end residential work. National BIM Standards. GSA BIM Resource. BIM & BEAM. BIM Videos.

Revit 40

Revit News CAD nemetschek AllPlan 40

Revit Beginners

AUGUST 3, 2006

Do you ever accidentally drag a wall or other model object across the screen when you didnt intend to move it? It might be nice if Revit would let you pick and choose which model and annotation objects can be moved with the Press + Drag option. We design traditional, high-end residential work. National BIM Standards.

Revit 40

Revit CAD nemetschek AllPlan BIM 40

Revit Beginners

APRIL 20, 2009

you can draw a simple building and link in a simple building (by shared coordinates) and move these two icons around a bit (clipped and unclipped) to see how the two models react or. We design traditional, high-end residential work. National BIM Standards. GSA BIM Resource. BIM & BEAM. BIM Videos.

Revit 40

Revit CAD BIM Autodesk 40

Revit Beginners

OCTOBER 25, 2006

Once you have your building(s) modelled start a new project. Link your building(s) into your new site model and adjust their elevation and orientation so they are properly located in the topography. While in your site model goto Tools. Save your site model. We design traditional, high-end residential work.

Revit 40

Revit Site CAD BIM 40

Revit Beginners

APRIL 25, 2007

Some people have to be reminded that the project file is a database and like any database the more and accurate information about the project you put into the model the more analytical modeling and scheduling you can get out of the model. I know the same is true for many BIM applications. National BIM Standards.

Revit 40

Revit CAD BIM Autodesk 40

Revit Beginners

MARCH 23, 2007

In an Architectural Record article " Getting on Board with Building Information Modeling " Larry Flynn describes a Data Manager as someone "responsible for coordinating the various computer files and models that are integrated into a BIM." In our office Data Managers are starting to inspect models for proper construction.

Revit 40

Revit Management CAD BIM 40

Pro Builder

APRIL 7, 2021

Cory Benjamin , 39, Project Director, BIM Manager, TK Design & Associates, South Lyon, Mich. Project Director, BIM Manager. Past Pro Builder Forty Under 40 Winners. . Pro Builder is proud to present the Forty Under 40 class of 2021. Alex Akel , 29, President / Owner, Akel Homes, Delray Beach, Fla. Cory Benjamin, 39.

Industrial 98

Industrial El Paso Education Cleveland 98

Revit Beginners

MARCH 5, 2007

Are you having trouble distinguishing detail lines from model lines in a view? Well, the easiest way to separate view specific content from model content in a view is to place a temporary filled region with a Solid Fill Pattern that covers the entire view (choose a neutral color). Display Model. National BIM Standards.

Revit 40

Revit CAD BIM nemetschek AllPlan 40

Revit Beginners

JANUARY 13, 2007

Specify Coordinates at a point) While Spot Coordinates will report the coordinates of any model or drafting element it is not really clear in the help files that Spot Elevations will report the elevation of only certain parts of model elements. We design traditional, high-end residential work. National BIM Standards.

Revit 40

Revit CAD BIM nemetschek AllPlan 40

Revit Beginners

OCTOBER 19, 2006

I just ran across this old post while searching for a way to upload Impression for a Presentation project Im doing in Architectural Drafting school. It loaded viewing the model from the bottom of the floor, under the building. We design traditional, high-end residential work. National BIM Standards. GSA BIM Resource.

Revit 40

Revit Autodesk CAD BIM 40

Revit Beginners

DECEMBER 4, 2006

The Building Information Modelling/Management concept (its past, present, and likely future). And unique modelling, documenting, and implimenting methods utilized by others in the Revit community. We design traditional, high-end residential work. National BIM Standards. GSA BIM Resource. BIM & BEAM.

Revit 40

Revit CAD nemetschek AllPlan BIM 40

Revit Beginners

DECEMBER 5, 2006

For instance you can combine custom room schedules with color fill plans (drafting. We design traditional, high-end residential work. National BIM Standards. GSA BIM Resource. BIM & BEAM. BIM Videos. Marathon Drafting. All Things BIM. CAD vs BIM. HOK Green BIM. Other BIM Software.

Revit 40

Revit CAD nemetschek AllPlan BIM 40

Revit Beginners

DECEMBER 7, 2006

The more accurate the information in your Revit model the more you can do with it. Models from different consultants (who use software other than Revit to model) can be combined for analysis and clash detection. Design Review – Export Revit models into the DWF format for project managers to markup. Applications.

Revit 40

Revit Autodesk CAD BIM 40

Revit Beginners

OCTOBER 10, 2006

Because we do a lot of high-end residential design most of our projects are very detailed and put Revits performance to the test. Weve noticed performance hits when modeling large topography surfaces and turning on shadows in any view. We design traditional, high-end residential work. National BIM Standards. BIM & BEAM.

Revit 40

Revit CAD Autodesk BIM 40

Revit Beginners

MARCH 28, 2008

It occured to me that I never once posted pictures of any project I worked on, so here are two images from a model I built back in Revit 4.5. We got our feet wet with 3D modeling and didnt try to do condocs until I was confident I could troubleshoot any Revit issues. We design traditional, high-end residential work. BIM & BEAM.

Revit 40

Revit CAD BIM Autodesk 40

Revit Beginners

SEPTEMBER 27, 2006

elevations, sections, 3D views, etc (similar to model lines) and youll have to adjust its visibility one view at a time. and Import your linked survey then it will export with the rest of your model to DWG format. The survey needs to be a part of the Revit model or Revit wont consider it when exporting your site plan to DWG.

Revit 40

Revit Site Plans CAD 40

Revit Beginners

AUGUST 23, 2006

If you want to do cost estimating outside of Revit you might try exporting the Revit model as an ODBC and importing the database into Timberline. We design traditional, high-end residential work. National BIM Standards. GSA BIM Resource. BIM & BEAM. BIM Videos. Marathon Drafting. All Things BIM.

Revit 61

Revit Estimating CAD Schedule 61

Revit Beginners

SEPTEMBER 29, 2006

This might be one way to model a niche. We design traditional, high-end residential work. National BIM Standards. GSA BIM Resource. BIM & BEAM. BIM Videos. Marathon Drafting. All Things BIM. CAD vs BIM. HOK Green BIM. Other BIM Software. BIM Conferences. at 10:57 PM.

Revit 40

Revit CAD nemetschek AllPlan nemetschek Vectorworks 40

Revit Beginners

SEPTEMBER 12, 2006

Did you model a rough opening height for your window that has say a sloping sill and now your head height is not accurate in your schedule? We design traditional, high-end residential work. National BIM Standards. GSA BIM Resource. BIM & BEAM. BIM Videos. Marathon Drafting. All Things BIM.

Revit 40

Revit CAD BIM nemetschek AllPlan 40

Revit Beginners

SEPTEMBER 22, 2006

It has helped to model furniture familt easily. We design traditional, high-end residential work. National BIM Standards. GSA BIM Resource. BIM & BEAM. BIM Videos. Marathon Drafting. All Things BIM. CAD vs BIM. HOK Green BIM. Other BIM Software. BIM Conferences.

Revit 40

Revit CAD nemetschek AllPlan BIM 40

Revit Beginners

OCTOBER 4, 2006

When you model your geometry give it a material called "Variable" or some other material name that is not used in your project file. In the material properties change your surface pattern to Solid fill[Drafting] and select a default color. We design traditional, high-end residential work. National BIM Standards.

Revit 40

Revit Materials CAD BIM 40

Revit Beginners

JULY 22, 2006

We often have split level projects and weve had a lot of trouble isolating the stem walls and footings from the rest of the model for use in a foundation plan. In Visibility/Graphics go to Model Categories and uncheck everything except Detail Items and Walls. We design traditional, high-end residential work. GSA BIM Resource.

Revit 40

Revit Foundation Plans CAD 40

Revit Beginners

JUNE 27, 2006

All of your model objects will initially reside in Workset 1. If you don’t initiate worksets early on you’re going to have to assign every model object to a workset after they’ve already been created and that can be a lot of unnecessary work. We design traditional, high-end residential work. GSA BIM Resource.

Revit 40

Revit CAD BIM Autodesk 40

Revit Beginners

OCTOBER 13, 2006

Now, making building pads, is normal to take so long to regenerate the model every time after I sketch a building pad, I am working in a doble cuore duo, 4gb Ram, but in 32 bits. We design traditional, high-end residential work. National BIM Standards. GSA BIM Resource. BIM & BEAM. BIM Videos. CAD vs BIM.

Revit 40

Revit CAD BIM Autodesk 40

Building Information Management

JULY 27, 2016

00 54 36 Building Information Modeling Exhibit. Residential Bath Accessories. 11 01 30 Operation and Maintenance of Residential Equipment. Project Delivery. 00 54 00 Agreement Form Supplements. 00 54 13 Supplementary Scope Statement. 00 54 21 Allowances Schedule. 00 54 22 Unit Prices Schedule. 00 55 00 Notice to Proceed.

Equipment 45

Equipment Construction Schedule Concrete 45

Building Information Management

JULY 27, 2016

00 54 36 Building Information Modeling Exhibit. Residential Bath Accessories. 11 01 30 Operation and Maintenance of Residential Equipment. Project Delivery. 00 54 00 Agreement Form Supplements. 00 54 13 Supplementary Scope Statement. 00 54 21 Allowances Schedule. 00 54 22 Unit Prices Schedule. 00 55 00 Notice to Proceed.

Equipment 40

Equipment Construction Schedule Concrete 40