The Constructor

NOVEMBER 19, 2011

Most lessons in engineering decision making come from the cases of histories of failures of structures, which itself are the results of a bad judgement, thus making us understand the pitfalls in conceptual design. From these experiences from past, the common causes of structural failures are understood.

Concrete 178

Concrete Foundation Engineering Design 178

Pro Builder

JULY 16, 2021

The Leading Cause of New Home Structural Failures? As the leading cause of new home structural failures, fill dirt is one of the most important structural elements of a home. And when fill dirt results in a failure, it’s a costly mistake to fix, says the National Association of Home Builders. cbroderick.

NAHB 52

NAHB Foundation Engineering Resource 52

The Constructor

NOVEMBER 1, 2011

There can be many causes for these defects. The problem areas, effects in foundation and defects in structure due to those causes are presented here. Insufficient width of foundation Settlement of foundation occurs due to insufficient distribution of load. Cracking of walls above ground level.

Foundation 240

Foundation Concrete Construction Materials 240

Construction Cost Estimating

JULY 10, 2019

Pile foundation contains sound bearing strength, good durability and small differential settlement with regards to other foundation types. Pile foundations are normally provided in the following conditions :- 1. Greater loads from the super structure for which shallow foundation may not become inexpensive or feasible.

Foundation 40

Foundation Feasibility Concrete Banking 40

CivilJungle

JANUARY 9, 2022

Spalling Concrete Foundation Repair. Spalling concrete foundation repair varies based on damage severity, the type and the location. Spalling concrete foundation repair should be carried out on the basis of recommended codes like ACI Code and BS EN 1504. What Is Foundation Spalling? 4 can also occur.

Foundation 52

Foundation Concrete Materials Drawings 52

CivilJungle

DECEMBER 20, 2021

A flexible road structure is a combination of several layers, which serves to distribute the loads from the business (both dynamic and static) to the beginning layers in a position so that the layers can bear without failure. Bituminous base course sub caste is used as the foundation on which face course or binder is placed.

Roads 52

Roads Concrete Materials Foundation 52

The Constructor

NOVEMBER 8, 2011

Cracks due to compression failure in beams Tweet Loading GET LATEST TOPICS IN YOUR EMAIL- SUBSCRIBE NOW. Cracks in concrete beams due to increased shear stress 2. Cracks parallel to main steel in case of corrosion in beams 4. Cracks due to increased bending stress in beams 5.

Concrete 244

Concrete Foundation Materials Contract 244

The Constructor

AUGUST 16, 2012

Rubble Stone Soling: The rubble stone generally used are of best variety of black trap / granite / basalt or other variety of stone available locally. The stone should be hard, durable free from defects and of required size as required at site or as per specification.

Foundation 203

Foundation Concrete Materials Design 203

CivilJungle

FEBRUARY 28, 2021

In painting work, fading is the common type of defect which causes discoloration on the paint. Rain , sunlight, frost, etc are the main causes of fading effect in painting. Causes of Fading: Ultraviolet radiation, sunlight, and infrared radiations are one of the most important causes of fading. Drying not proper.

Maine 52

Maine Foundation Drawings Concrete 52

The Constructor

NOVEMBER 8, 2011

This type of shrinkage is caused by the loss of moisture from the cement paste constituent, which can shrink by as much as 1% per unit length. It is the combination of shrinkage and restraint, which is usually provided by another part of the structure or by the subgrade that causes tensile stresses to develop.

Concrete 230

Concrete Foundation Contract Materials 230

Construction Cost Estimating

FEBRUARY 9, 2018

Generally dam failures are happen rarely but can do huge damage and loss of life, it happens as the dam structures are constrained to horizontal loading from the water head behind. Overtopping: It is happen when water slopping over the top of a dam and become a reason of dam failure. . Subsidence and the movement of the foundation.

Foundation 40

Foundation Materials Concrete Design 40

CivilJungle

MAY 16, 2021

What Is Foundation Repair? Foundation renovation is required when the foundation of a home, building , or structure is impaired & the core structure of the building is required to be repaired. Foundation Techniques. This results in movements of foundation leading to cracks which can be checked by watering.

Foundation 52

Foundation Concrete Renovating Dallas 52

Safety Services Company

MARCH 1, 2024

In this blog, let’s break down the major causes of ladder-related injuries, the safety essentials for contractors, and how to ensure safety and compliance for your workers at all times! Failure to keep count of the rungs can result in a slip and fall. Nothing makes the heart skip a beat like missing the rung of a ladder.

Safety 93

Safety Contractors Inspections Accidents 93

CivilJungle

JANUARY 11, 2022

Tensile strength of the concrete is defined as the ability of the concrete to resist the tensile force applied on it or the ability of the concrete to withstand the pull force applied on it without causing failure. Information of Tensile Strength of Concrete. Also, read: What Is Concrete | 31 Different Types of Concrete. fcr = 0.7 ?

Concrete 52

Concrete Foundation Zoning Materials 52

Job Order Contracting

MAY 6, 2020

Excessive command and control is a root cause of failure, and contrary to the foundational principals of leadership. Significant positive changes throughout the AECOO sector, will only occur when the fundamental issues creating rampant waste and low productivity are understood. The Problem. – Kanter, R.M.

Construction 150

Construction Procurement Innovation Products 150

Construction Cost Estimating

AUGUST 31, 2018

The design of retaining wall is based on the following mode of failures: Retaining Wall Mode of Failures 1. Overturning: The retaining wall under overturning failure easily collapses in bending. The walls shift outer with a passive failure of soil ahead of foundation and active failure of soil back the wall.

Design 40

Design Foundation Accounting Roads 40

Construction Cost Estimating

NOVEMBER 23, 2018

There are several reasons for collapsing of foundation which range from poor soil condition, structural faults etc. Given below, some of the major causes for collapsing of foundation :- 1. Collapsing of Foundation because of surpassing the bearing strength of soil 2. load per unit area say KN/sq.m.

Foundation 40

Foundation Safety Construction Housing 40

The Constructor

NOVEMBER 8, 2011

Cracks in reinforced concrete columns due to shrinkage of concrete 3. Cracks in reinforced concrete columns due to increased load on the slab 4. Cracks in reinforced concrete columns due to sulphate attack 5. Cracks in reinforced concrete columns due to alkaline aggregates Tweet Loading GET LATEST TOPICS IN YOUR EMAIL- SUBSCRIBE NOW.

Concrete 223

Concrete Foundation Materials Contract 223

CivilJungle

MARCH 7, 2021

This is not a typical type of foundation. Inverted Arch Footing is built between the two foundation walls. The walls should be thick enough and strong to withstand the outward horizontal thrust caused by the action of the arch. This arch provides the foundation for the walls and can withstand the forces of its sides.

Foundation 52

Foundation Drawings Transportation Engineering 52

Levelset

SEPTEMBER 16, 2022

Who pays for damages caused by faulty work or materials? Completed operations insurance covers property damage or injury caused by work that a contractor performed in the past. It covers the damages caused by faulty work, product failure, or other causes. What is completed operations insurance?

Insurance 52

Insurance Liability Claims Contractors 52

CivilJungle

OCTOBER 26, 2020

The floating column (Planted Column, Hanging Column, and Stub Column) is nothing but a vertical member or element that rests on a beam but does not transfer the load directly to the foundation. Earthquake is a natural phenomenon in which disasters are mainly caused by damage to the building or the loss of other man-made structures.

Foundation 52

Foundation Zoning Architecture Design 52

The Constructor

MARCH 18, 2012

caused normally by the ingress of carbon dioxide (carbonation). The composition of mild steel varies along its length and potential anodic (more negatively charged) and cathodic (positively charged) sites can be set up at various points. However the highly alkaline environment (pH about 12.8) This is known as Passivation.

Concrete 235

Concrete Foundation Materials Design 235

CivilJungle

FEBRUARY 26, 2021

Introduction of How to Calculate Steel in Rcc Slab. The slab is one of the most important structural elements in the construction of buildings. Many of us are confused that how to calculate steel in RCC slab. In this article, we will get to know about the step-by-step procedure to calculate steel in RCC slab. Example of Calculate Steel in Rcc Slab.

Maine 90

Maine Drawings Foundation FAQ 90

The Constructor

NOVEMBER 16, 2011

The requirements of site for buildings with different occupancies are different. So all the buildings proposed for different purposes have different requirements and thus different considerations for their site selection. The site should be in fully developed area or in the area which has potential of development.

Residential 240

Residential Site Plans Concrete 240

CivilJungle

DECEMBER 21, 2020

Introduction of Foundation for House. Foundation is one of the most important parts of the Building on which the whole Structure is res t. Foundation is a very essential part of a building which provide a base to the structure. Definition of Foundation. Definition of Foundation. Location of the Foundation.

Foundation 59

Foundation Housing Concrete Site 59

Levelset

SEPTEMBER 23, 2022

What this means is that financial losses caused by accidents, mistakes, and other issues that are the fault of the general contractor will be covered under the policy. A general liability insurance policy protects the policyholder from claims of property damage or bodily injury caused by the contractor or its employees.

Insurance 52

Insurance Liability Accidents Risk 52

CivilJungle

JANUARY 11, 2021

Also, Read: What Is Pad Foundation | Failure of Pad Foundation | Pad Foundation Detail | Types of Pad Foundation | Design of the Pad Footing Depends on Several Factors. Bulking of Sand Is Caused Due to. This caused an increase in volume or bulking of sand. What Is Bulking of Sand?

Foundation 52

Foundation Concrete Housing Roads 52

The Constructor

MARCH 20, 2012

From the diagram above, we can see how the process unfolds. When the binding has set, the steel bars are placed into position. Plastic spacers are made to fit particular bar size and give specified depths of cover. Small mortar blocks are also commonly used which are tied to the reinforcement bars using soft iron binding wire.

Concrete 250

Concrete Foundation Materials Design 250

Construction Cost Estimating

NOVEMBER 5, 2017

A foundation alias ground sill is the low part or sub-structure of an architectural structure that is artificially constructed on the soil to transmit loads from the structure to the ground securely. Foundation of a structure is built up underneath the ground level with the purpose of making the lateral strength of the structure better.

Foundation 40

Foundation Construction Concrete Guidelines 40

CivilJungle

DECEMBER 26, 2020

A tort , in common law jurisdiction, could be a tort (other than a breach of contract) that causes an applicant to suffer loss or hurt, leading to legal liability for the one that commits the act. Introduction of Tort Vs Contract. A contract is lawfully enforceable as a result of it meets the wants and approval of the law. What Is Tort?

Contract 52

Contract Liability Legal Injury 52

GCP Applied Technologies

JUNE 7, 2018

Protecting below grade spaces such as tunnels as well as foundation walls and basements is a complex challenge, due to a number of environmental factors that can degrade the structure or cause tremendous damage to what is stored within it. Waterproofing Membranes for Below Grade Structures. Table of contents. Environmental Challenges.

Concrete 103

Concrete Foundation Risk Organization 103

Construction Cost Estimating

APRIL 4, 2018

High rising buildings generally fall when the earthquake hits them and cause utmost destruction or damage with a loss of lives and the fall depends on several reasons. Earthquake is really a destructive natural destroyer that is destroying some towns and cities continuously over the centuries and damaging them.

Foundation 40

Foundation Plans Structural Engineering Comparison 40

Julian Construction

APRIL 1, 2011

Foundation Repair. Foundation Replacement. Checklist for Diagnosing Foundation Problems. Early identification and repair of foundation problems can save you money by preventing more extensive damage and, in worst case scenarios, building collapse. Settling can cause walls to rotate outward as the structure sinks.

Foundation 110

Foundation Construction Inspections Los Angeles 110

Safety Services Company

MARCH 1, 2024

In this blog, let’s break down the major causes of ladder-related injuries, the safety essentials for contractors, and how to ensure safety and compliance for your workers at all times! Failure to keep count of the rungs can result in a slip and fall. Nothing makes the heart skip a beat like missing the rung of a ladder.

Safety 48

Safety Contractors Inspections Accidents 48

CivilJungle

OCTOBER 21, 2020

Also, read: What Is Structural Settlement | Causes For Structural Settlement | What Is Soil Settlement & Foundation Structural Settlement. Introduction of RQD. In Civil engineering, different parameters are used to characterize the Quality of the rocks. What Is RQD? mm) drilled with double-tube core barrel using a diamond bit.

Design 98

Design Zoning Concrete Engineering 98

Construction Cost Estimating

JULY 7, 2019

To combat failure of the rock mass caused by shear, rock anchors are used. To combat failure of the rock mass caused by shear, rock anchors are used. Rock reinforcement is mainly applied to pre-load the foundation. It facilitates to bind the wire cables with the foundation under the sea.

Foundation 40

Foundation Employment Maine Safety 40

CivilJungle

FEBRUARY 27, 2021

For load-bearing structure, the foundation plinth area rate per 1 sq.m. For load-bearing structure, the foundation plinth area rate per 1 sqm is 2980, super-structure is 7310 and finishing is 1495. For load-bearing structure, the foundation plinth area rate per 1 sqm is 2980, super-structure is 7310 and finishing is 1495.

Estimating 59

Estimating Foundation Drawings Residential 59