Safety Services Company

MARCH 3, 2014

The Occupational Safety and Health Administration has issued its annual inspection plan under the Site-Specific Targeting 2014 * program to direct enforcement resources to workplaces where the highest rates of injuries and illnesses occur.

OSHA 48

OSHA Injury Plans Inspections 48

Construction Marketing

JULY 14, 2022

No matter the industry, a lot of companies need a building. Each of them has its own benefits and disadvantages depending on the industry. . The agriculture industry works well with fabric buildings while manufacturing production facilities often go with metal buildings. . Considering Drainage.

Commercial 215

Commercial Fabrication Concrete Inspections 215

Safety Services Company

NOVEMBER 22, 2013

Each year OSHA conducts around 50,000 workplace inspections. These investigations are typically triggered by an accident at the workplace, an employee complaint or an OSHA initiated industry specific safety blitz. This material will help define the focus on an inspection, so the representative can appropriately guide the inspector.

Inspections 60

Inspections OSHA Conference Employment 60

Construction Marketing

JUNE 7, 2021

With all the hustle and bustle happening in loading docks, it shouldn’t surprise you that they’re a hotbed for injuries and accidents; countless dangers could occur in a typical dock. Here are more key precautions that you must consider to minimize, if not eliminate, accidents and injuries at the loading docks. Final Thoughts.

Safety 292

Safety Accidents Injury Equipment 292

Lets Build

OCTOBER 28, 2022

Safety violations on construction sites aren’t uncommon—just look at these statistics: Over 20% of all fatal workplace accidents in the EU during 2019 took place in the construction industry, making it the top industry for fatal injuries. Check this checklist: Workplace Safety Inspection. During that same time, 59.5%

Safety 141

Safety Accidents OSHA Construction 141

Fieldwire

MAY 16, 2022

Construction hasn’t always been the most technologically advanced industry, but recent years have shown that technology has been beneficial in nearly every aspect of it. 1 in 5 worker deaths is in the construction industry. Injury and illnesses are 24% higher among construction employees than in any other industry in the US.

Industrial 98

Industrial Accidents Construction Safety 98

Safety Services Company

MARCH 1, 2024

In this blog, let’s break down the major causes of ladder-related injuries, the safety essentials for contractors, and how to ensure safety and compliance for your workers at all times! Pre-Climb Inspection Every ladder used should be pre-climb inspected, no matter how new. Ladders are no exception.

Safety 48

Safety Contractors Inspections Accidents 48

Constructonomics

AUGUST 28, 2018

The construction industry is comprised of numerous tools and equipment that are used for some heavy-duty work. This makes it critical that you inspect the construction equipment regularly so that they perform at their maximum potential every single time they are used. Read on to know more. What Happens When Equipment Fails?

Equipment 188

Equipment Construction Accidents Injury 188

FDR Safety

MAY 19, 2016

For years, OSHA has been claiming that employers often attempt to discourage the reporting of injuries by disciplining, drug testing, or taking other steps to discourage injured workers from reporting an injury. Inform employees of the procedure for reporting work-related injuries and illnesses. The new rule changes that.

OSHA 195

OSHA Employment Injury Safety 195

Safety Services Company

FEBRUARY 24, 2014

Estimates suggest that repetitive motion injuries cost United States businesses over $20 billion just in workers’ compensation alone. Business costs aside, Repetitive Motion Injuries (RMIs) are a heavy burden to the individual as well. Business costs aside, Repetitive Motion Injuries (RMIs) are a heavy burden to the individual as well.

Injury 48

Injury Equipment Safety Inspections 48

Pro Builder

AUGUST 5, 2022

Consider these elements of a training and awareness program to save lives, mitigate injuries, and reduce liability and costs . Last year, members of Associated Builders and Contractors , a national trade association representing the nonunion construction industry, invested $1.6 John Caulfield, senior contributing editor.

Safety 72

Safety Resource Injury Construction 72

Pro Builder

JULY 28, 2022

Trenching and excavating are two of the most dangerous activities in the construction industry. Fran Smith safety director for Cavan Construction , in the greater Philadelphia area, advises workers to never enter a trench unless it has been properly inspected. The risk of injury or death,” she says, “is just too high.”.

Safety 98

Safety OSHA Construction Inspections 98

Levelset

JUNE 29, 2022

To those on the jobsite day-to-day, it’s no surprise that construction consistently tops the list of the most dangerous industries in the US. The Occupational Health and Safety Administration (OSHA) is the federal agency responsible for maintaining workplace safety across all industries. OSHA standards for construction. View profile.

OSHA 52

OSHA Inspections Construction Safety 52

FDR Safety

JANUARY 16, 2020

On December 10, 2019 OSHA published CPL 03-00-022 , National Emphasis Program on Amputations in Manufacturing Industries. This Instruction supersedes OSHA Instruction CPL 03-00-019, National Emphasis Program on Amputations that was published in August of 2015.

OSHA 120

OSHA Inspections Safety Equipment 120

Viewpoint Construction Technology

OCTOBER 23, 2018

Data analytics and business intelligence have become hot topics in construction as firms are seeing the benefits other industries are realizing. The industry as a whole is looking for ways to help contractors get smart about data. Reducing Risk and Increasing Safety. All contractors should track data related to safety issues.

Construction 240

Construction Software Software Cash Flow 240

Safety Services Company

JANUARY 5, 2024

Vehicles should also be inspected and maintained. To avoid winter car accidents, you must: Check tires regularly to ensure their tread and rubber provide good grip on icy roads Inspect the vehicles’ headlights, brake lights, and tail lights Keep a safety kit with blankets, charges, ice scrapers, flat tire repair kits, basic first aid kits 2.

Safety 81

Safety Accidents Construction Risk 81

Construction Junkie

NOVEMBER 9, 2020

In years past , I shared the top 10 list of violations across all industries, but this year, I was able to find a list of construction-specific standards. Despite being the leading cause of jobsite injuries and fatalities for a long time, fall protection is still a huge opportunity in the industry.

OSHA 98

OSHA Construction Injury Inspections 98

Construction Marketing

NOVEMBER 25, 2014

Here are some processes in the construction industry that can make an easy conversion to mobile. Site Inspections. Paper forms can produce several vulnerabilities and inefficiencies for site inspections. One problem with using paper forms for site inspections is that workers could report inspecting a site they never visited.

Mobility 233

Mobility Inspections Construction Safety 233

Construction Marketing

JUNE 14, 2021

Often, hoisting and rigging hazards are also overlooked in this industry. If you work in an industry prone to these hazards, read through this article as it lists down hoisting and rigging hazards to watch out for. Failing to do so is one of the many workplace injuries that can put you out of business. 4) Unstable Crane.

Overhead 156

Overhead Safety Accidents Materials 156

FDR Safety

JULY 19, 2013

Joe Wolfsberger, former vice president of EHS for Ingersoll Rand, is joining FDRsafety as a senior advisor focusing on occupational health/industrial hygiene and has written the following blog post on isocyanates. Isocyanates are used in many industries including automotive, foundries, construction materials, coatings and adhesives.

OSHA 120

OSHA Inspections Inventory Industrial 120

Levelset

NOVEMBER 10, 2022

Construction is a risky business by almost any measure: It not only has one of the highest business failure rates of any industry, but construction work also sits atop the list of the most dangerous jobs. In 2019, the construction industry accounted for about 20% of all work-related fatalities in the U.S.

Safety 52

Safety Site Injury Construction 52

Safety Services Company

JULY 19, 2021

Originally developed at OSHA’s request, NFPA 70E helps companies and employees avoid workplace injuries and fatalities due to shock, electrocution, arc flash, and arc blast, and assists in complying with OSHA 1910 Subpart S and OSHA 1926 Subpart K.”. The best practice in the safety industry is to do both.

OSHA 75

OSHA Electrical Safety Employment 75

Construction Junkie

SEPTEMBER 21, 2020

CPWR – The Center for Construction Research and Training Another one of my favorite resources is CPWR, which is dedicated to providing safety resources in order to reduce jobsite injuries, illnesses, and fatalities. Each course can be used to earn continuing education credits and it also approved by several industry organizations.

Resource 140

Resource Safety ProCore OSHA 140

Green Building Law Update

JULY 19, 2020

But there is no authoritative nationwide repository of bird casualties or injuries, so estimating the scope of this is difficult. The County Department of Inspections, Licenses and Permits statistics indicate it would apply to less than 1% of permits issued each year. with an average household in excess of $116,000.

New York City 289

New York City Green Maryland Permits 289

Safety Services Company

MARCH 5, 2014

Because of high profile fatal incidents and a high rate of injury OSHA wants to ensure temporary workers have the same protections and training of traditional workers. Instructors are also instructed to assess during inspections and investigations whether employees are temporary and have received required training.

OSHA 48

OSHA Safety Injury Inspections 48

Autodesk Construction Cloud

OCTOBER 23, 2023

Data cited by ADP indicates that around 41% of the current construction workforce will retire by 2031, which means the industry faces a potential talent vacuum that could further strain project timelines and costs. Due to the industry's inherent safety risks, candidates may be more discerning about the firms they work with.

AGC 105

AGC Construction Safety Autodesk 105

Safety Services Company

APRIL 5, 2018

OSHA Inspections. Workplace inspections and investigations are conducted by OSHA compliance safety and health officers trained in safety and industrial hygiene. Inspections are conducted without advance notice. What does the inspection process involve? Walkthrough.

OSHA 48

OSHA Safety Inspections Employment 48

Safety Services Company

OCTOBER 22, 2020

All of that thinking has since changed as they have recently stepped up their efforts to enforce healthy workplaces through workplace inspections and subsequent financial penalties. Largely it is the Healthcare and Rehabilitation sector, but it has spilled over into food processing industries, other manufacturing, and general construction.

OSHA 62

OSHA Safety Employment Injury 62

FDR Safety

JUNE 27, 2012

The training requirements for OSHA’s approved 10 and 30 hour safety courses – used by thousands of employers in construction and general industry – have been revised to mandate more instruction on the exercise of employee rights in the workplace, including step-by-step instructions for filing an OSHA complaint. •

OSHA 136

OSHA Injury Safety Employment 136

Construction Marketing

JULY 16, 2021

Material handling and storage efficiency are especially critical in the construction industry. Before commencing any work, inspect construction equipment, tools, and machinery on the site to verify whether or not they’re safe to use. Any contractor may encounter several difficulties in terms of keeping such materials safe.

Materials 188

Materials Safety Construction Site 188

BD+C

MAY 1, 2023

Jeff Danley Contractors 360 Camera AEC Tech Innovation Drones Building Automation Building Tech Building Technology Project + Process Innovation The Changing Built Environment Artificial intelligence is causing a stir in most industries, and construction is no different. nonfatal injuries or illnesses that required days off in 2020.

Visualization 105

Visualization Site Safety Injury 105

Construction Equipment

AUGUST 8, 2014

s automotive parts warehouse and distribution center in Toledo, Ohio, which distributes Chrysler brand parts, has been cited for one repeat and two serious safety violations involving unsafe operation of powered industrial vehicles. OSHA initiated the inspection Feb. No injuries were reported.

OSHA 48

OSHA Ohio Injury Inspections 48

Safety Services Company

JANUARY 9, 2013

This article was written by Safety Consultants with Safety Services Company , we provide Construction, Manufacturing, and General Industry Safety Programs to over 100,000 clients across the United States and Canada. In addition, OSHA implements both national and local “emphasis” inspection programs to target high-risk hazards and industries.

OSHA 48

OSHA Risk Plans Injury 48

Autodesk Construction Cloud

MARCH 1, 2022

When something is a top industry priority, there’s always room for improvement. Filling out construction reports and completing project checklists, whether for construction safety or quality inspections, can often be a tedious process. Even with all the focus put on budgets, timelines, and processes, safety still comes first.

Safety 98

Safety Construction Inspections Software 98

Levelset

SEPTEMBER 22, 2022

In the construction industry, a lot can go wrong with the progress and completion of the structure itself. Hazardous conditions can have both short-term and long-term financial consequences along with the possibility of work-related illness or injury. . of all deaths in the construction industry. . Struck-by accidents.

Safety 52

Safety Injury Risk Construction 52

Safety Services Company

FEBRUARY 5, 2020

Under ideal conditions, the equipment used in the industrial and manufacturing industry is safe to operate and requires almost no supervision. Machinery used in the manufacturing and industrial industry requires a considerable amount of energy in order to run. Inspect and Update Procedures on a Regular Basis.

Guidelines 62

Guidelines OSHA Injury Safety 62

Safety Services Company

FEBRUARY 4, 2020

Under ideal conditions, the equipment used in the industrial and manufacturing industry is safe to operate and requires almost no supervision. Machinery used in the manufacturing and industrial industry requires a considerable amount of energy in order to run. Inspect and Update Procedures on a Regular Basis.

Guidelines 62

Guidelines OSHA Injury Safety 62