Revit Beginners

JUNE 24, 2010

Having built a few parametric families, here is my experience: The dimensions that are variable or can flex need to be modeled before any actual geometry. We design traditional, high-end residential work. Autodesk Seek. Autodesk University. Autodesk Revit. Revit Zone. Autodesk Seek. Customer Council.

Revit 58

Revit CAD BIM nemetschek AllPlan 58

Revit Beginners

AUGUST 19, 2009

We have one model that was started in Revit before we knew any of the limitations of Revit. The model is not clean enough to develop construction documents so we have passed along that task to another architect. We design traditional, high-end residential work. Autodesk Seek. Autodesk University. Autodesk Revit.

Revit 40

Revit CAD BIM nemetschek AllPlan 40

Revit Beginners

JUNE 27, 2008

How do you model the roof and ridge roll? How do you model the roof such that the roof tile is all in 3D? If you want to 3d model all the roof tiles there is a shortcut posted on AUGI using sloped glazing. We design traditional, high-end residential work. Autodesk Seek. Autodesk University. Autodesk Revit.

Revit 40

Revit CAD nemetschek AllPlan BIM 40

Revit Beginners

JULY 23, 2010

like the change is some new data for the model. I upgraded a model once, from Revit 2009 to Revit 2011, and an odd thing happened. This can reset data in the model. We design traditional, high-end residential work. Autodesk Seek. Autodesk University. Autodesk Revit. Revit Zone. Autodesk Seek.

Revit 40

Revit CAD BIM Autodesk 40

Revit Beginners

SEPTEMBER 4, 2008

We design traditional, high-end residential work. Autodesk Seek. Autodesk University. Autodesk Revit. Revit Zone. Autodesk Seek. Autodesk University. Journal of Building Information Modeling. Im a Revit Beginner with an architectural office in Santa Barbara. I was introduced to Revit 4.5

Revit 40

Revit CAD nemetschek AllPlan nemetschek Vectorworks 40

Revit Beginners

MARCH 21, 2007

Take a look around and youll find that Revit model data is being exported to other applications for many uses. Here is a short list of uses for which Revit model data is being exported. We design traditional, high-end residential work. Autodesk Seek. Autodesk University. Autodesk Revit. Revit Zone.

Revit 40

Revit News CAD nemetschek AllPlan 40

Revit Beginners

DECEMBER 7, 2006

The more accurate the information in your Revit model the more you can do with it. Models from different consultants (who use software other than Revit to model) can be combined for analysis and clash detection. Design Review – Export Revit models into the DWF format for project managers to markup. Applications.

Revit 40

Revit Autodesk CAD BIM 40

Revit Beginners

JANUARY 20, 2010

Some food for thought: Could it (read that as "it will") be better to let the walls be modeled as they will be built (with dead spaces in between), rather than using in-place walls that simply mimic old methodologies, like CAD or Hand drawn lines filled with poche or hatching? It is more suited to a model that is about graphics.

Revit 40

Revit CAD BIM Autodesk 40

Revit Beginners

APRIL 20, 2009

you can draw a simple building and link in a simple building (by shared coordinates) and move these two icons around a bit (clipped and unclipped) to see how the two models react or. We design traditional, high-end residential work. Autodesk Seek. Autodesk University. Autodesk Revit. Clipping the Survey Point.

Revit 40

Revit CAD BIM Autodesk 40

Revit Beginners

OCTOBER 25, 2006

Once you have your building(s) modelled start a new project. Link your building(s) into your new site model and adjust their elevation and orientation so they are properly located in the topography. While in your site model goto Tools. Save your site model. We design traditional, high-end residential work.

Revit 40

Revit Site CAD BIM 40

Revit Beginners

APRIL 25, 2007

Some people have to be reminded that the project file is a database and like any database the more and accurate information about the project you put into the model the more analytical modeling and scheduling you can get out of the model. We design traditional, high-end residential work. Autodesk Seek. Revit Zone.

Revit 40

Revit CAD BIM Autodesk 40

Revit Beginners

AUGUST 3, 2006

Do you ever accidentally drag a wall or other model object across the screen when you didnt intend to move it? It might be nice if Revit would let you pick and choose which model and annotation objects can be moved with the Press + Drag option. We design traditional, high-end residential work. Autodesk Seek. Revit Zone.

Revit 40

Revit CAD nemetschek AllPlan BIM 40

Revit Beginners

DECEMBER 5, 2006

We design traditional, high-end residential work. Autodesk Seek. Autodesk University. Autodesk Revit. Revit Zone. Autodesk Seek. Autodesk University. For instance you can combine custom room schedules with color fill plans (drafting. Im a Revit Beginner with an architectural office in Santa Barbara.

Revit 40

Revit CAD nemetschek AllPlan BIM 40

Revit Beginners

DECEMBER 4, 2006

The Building Information Modelling/Management concept (its past, present, and likely future). And unique modelling, documenting, and implimenting methods utilized by others in the Revit community. We design traditional, high-end residential work. Autodesk Seek. Autodesk University. Autodesk Revit.

Revit 40

Revit CAD nemetschek AllPlan BIM 40

Revit Beginners

OCTOBER 10, 2006

Because we do a lot of high-end residential design most of our projects are very detailed and put Revits performance to the test. Weve noticed performance hits when modeling large topography surfaces and turning on shadows in any view. So we asked Autodesk a few questions. We design traditional, high-end residential work.

Revit 40

Revit CAD Autodesk BIM 40

Revit Beginners

MARCH 5, 2007

Are you having trouble distinguishing detail lines from model lines in a view? Well, the easiest way to separate view specific content from model content in a view is to place a temporary filled region with a Solid Fill Pattern that covers the entire view (choose a neutral color). Display Model. Autodesk Seek. Revit Zone.

Revit 40

Revit CAD BIM nemetschek AllPlan 40

Revit Beginners

MARCH 23, 2007

In an Architectural Record article " Getting on Board with Building Information Modeling " Larry Flynn describes a Data Manager as someone "responsible for coordinating the various computer files and models that are integrated into a BIM." In our office Data Managers are starting to inspect models for proper construction.

Revit 40

Revit Management CAD BIM 40

Revit Beginners

OCTOBER 17, 2006

Laura Handler is a Building Information Modeller with Tocci Building Corporation. We design traditional, high-end residential work. Autodesk Seek. Autodesk University. Autodesk Revit. Revit Zone. Autodesk Seek. Autodesk University. Autodesk Impression. David Duarte. at 6:26 PM.

Revit 40

Revit BIM CAD nemetschek AllPlan 40

Revit Beginners

AUGUST 21, 2006

This isnt necessarily a bad habit as long as they are using detail lines and not model lines (detail lines are view specific but model lines will show up everywhere). The Revit 3D model is just a place to start. We design traditional, high-end residential work. Autodesk Seek. Autodesk University. Revit Zone.

Revit 40

Revit CAD BIM nemetschek AllPlan 40

Revit Beginners

OCTOBER 26, 2006

Youll also find a Revit model of Calatravas Turning Torso project in Malmö, Sweden. See how it was modelled. Hello David, I want to use bar grating or grate lock or any kind of grade in the floor and the stairs in my revit model, if you know anyway could you please let me know? We design traditional, high-end residential work.

Revit 40

Revit CAD BIM ArchiCAD 40

Revit Beginners

SEPTEMBER 27, 2006

elevations, sections, 3D views, etc (similar to model lines) and youll have to adjust its visibility one view at a time. and Import your linked survey then it will export with the rest of your model to DWG format. The survey needs to be a part of the Revit model or Revit wont consider it when exporting your site plan to DWG.

Revit 40

Revit Site Plans CAD 40

Revit Beginners

JANUARY 13, 2007

Specify Coordinates at a point) While Spot Coordinates will report the coordinates of any model or drafting element it is not really clear in the help files that Spot Elevations will report the elevation of only certain parts of model elements. We design traditional, high-end residential work. Autodesk Seek. Revit Zone.

Revit 40

Revit CAD BIM nemetschek AllPlan 40

Revit Beginners

SEPTEMBER 29, 2006

This might be one way to model a niche. We design traditional, high-end residential work. Autodesk Seek. Autodesk University. Autodesk Revit. Revit Zone. Autodesk Seek. Autodesk University. This behavior may be automatic for some curtain walls (like the storefront curtain wall). David Duarte.

Revit 40

Revit CAD nemetschek AllPlan nemetschek Vectorworks 40

Revit Beginners

MARCH 28, 2008

It occured to me that I never once posted pictures of any project I worked on, so here are two images from a model I built back in Revit 4.5. We got our feet wet with 3D modeling and didnt try to do condocs until I was confident I could troubleshoot any Revit issues. We design traditional, high-end residential work. Revit Zone.

Revit 40

Revit CAD BIM Autodesk 40

Revit Beginners

SEPTEMBER 12, 2006

Did you model a rough opening height for your window that has say a sloping sill and now your head height is not accurate in your schedule? We design traditional, high-end residential work. Autodesk Seek. Autodesk University. Autodesk Revit. Revit Zone. Autodesk Seek. Autodesk University.

Revit 40

Revit CAD BIM nemetschek AllPlan 40

Revit Beginners

SEPTEMBER 22, 2006

It has helped to model furniture familt easily. We design traditional, high-end residential work. Autodesk Seek. Autodesk University. Autodesk Revit. Revit Zone. Autodesk Seek. Autodesk University. Post a Comment. Newer Post. Older Post. Subscribe to: Post Comments (Atom). Subscribe To.

Revit 40

Revit CAD nemetschek AllPlan BIM 40

Revit Beginners

JULY 22, 2006

We often have split level projects and weve had a lot of trouble isolating the stem walls and footings from the rest of the model for use in a foundation plan. In Visibility/Graphics go to Model Categories and uncheck everything except Detail Items and Walls. We design traditional, high-end residential work. Autodesk Seek.

Revit 40

Revit Foundation Plans CAD 40

Revit Beginners

AUGUST 23, 2006

If you want to do cost estimating outside of Revit you might try exporting the Revit model as an ODBC and importing the database into Timberline. We design traditional, high-end residential work. Autodesk Seek. Autodesk University. Autodesk Revit. Revit Zone. Autodesk Seek. Autodesk University.

Revit 61

Revit Estimating CAD Schedule 61

Revit Beginners

OCTOBER 4, 2006

When you model your geometry give it a material called "Variable" or some other material name that is not used in your project file. We design traditional, high-end residential work. Autodesk Seek. Autodesk University. Autodesk Revit. Revit Zone. Autodesk Seek. Autodesk University. Yes you can.

Revit 40

Revit Materials CAD BIM 40

Revit Beginners

OCTOBER 13, 2006

Now, making building pads, is normal to take so long to regenerate the model every time after I sketch a building pad, I am working in a doble cuore duo, 4gb Ram, but in 32 bits. We design traditional, high-end residential work. Autodesk Seek. Autodesk University. Autodesk Revit. Revit Zone. Autodesk Seek.

Revit 40

Revit CAD BIM Autodesk 40

Do

OCTOBER 20, 2009

To dive into a little more detail Autodesk will be releasing the "Subscription Advantage Pack" essentially this wraps up things like "Revit Extensions" or the brand new "Wood Framing Utility" as well as including a special Revit build that includes new features for subscribers only. Autodesk Revit blogger day! Revit Zone.

Revit 40

Revit Autodesk BIM Modeling 40

Revit Beginners

JUNE 27, 2006

All of your model objects will initially reside in Workset 1. If you don’t initiate worksets early on you’re going to have to assign every model object to a workset after they’ve already been created and that can be a lot of unnecessary work. We design traditional, high-end residential work. Autodesk Seek.

Revit 40

Revit CAD BIM Autodesk 40