Revit Beginners

APRIL 25, 2007

Some people have to be reminded that the project file is a database and like any database the more and accurate information about the project you put into the model the more analytical modeling and scheduling you can get out of the model. Revit Zone. Find Consultants. ► 2008. (7). Revit Learning Club.

Revit 40

Revit CAD BIM Autodesk 40

Revit Beginners

SEPTEMBER 4, 2008

Thursday, September 04, 2008. Revit Zone. Find Consultants. ▼ 2008. (7). Journal of Building Information Modeling. Ive been teaching our office how to use Revit Architecture. This blog will highlight some of the common questions and cool tips found in the process of transitioning our office to Revit.

Revit 40

Revit CAD nemetschek AllPlan nemetschek Vectorworks 40

Natural Building

DECEMBER 10, 2008

Kelly has lived in an earthbag/papercrete home that he built and consults about sustainable building design. Natural Building Colloquium, 2008. December 10, 2008. Analyze how current approaches to zoning, such as performance and form-based systems, must evolve in order to promote sustainable communities. Oil Dependency.

Sustainability 40

Sustainability Green Architecture California 40

Building Information Management

JULY 2, 2012

From a technical point of view HVACie is an extention of the IFC Coordination Model View Definition. . Ontology for Life-Cycle Modeling of Heating, Ventilating, and Air Conditioning (HVAC) Systems. Model View Definition. Hitchcock Consulting. Model View Definition. 2012-03-01-CERL-CR-12-2-ModelView. March 2012.

Documentation 40

Documentation Equipment Modeling Design 40

Building Information Management

JULY 2, 2012

From a technical point of view HVACie is an extention of the IFC Coordination Model View Definition. . Ontology for Life-Cycle Modeling of Heating, Ventilating, and Air Conditioning (HVAC) Systems. Model View Definition. Hitchcock Consulting. Model View Definition. 2012-03-01-CERL-CR-12-2-ModelView. March 2012.

Documentation 40

Documentation Equipment Modeling Design 40

Revit Beginners

AUGUST 19, 2009

We have one model that was started in Revit before we knew any of the limitations of Revit. The model is not clean enough to develop construction documents so we have passed along that task to another architect. Revit Zone. Find Consultants. ► 2008. (7). David Duarte. at 3:06 PM. 1 comment: antman.

Revit 40

Revit CAD BIM nemetschek AllPlan 40

Revit Beginners

JUNE 24, 2010

Having built a few parametric families, here is my experience: The dimensions that are variable or can flex need to be modeled before any actual geometry. Revit Zone. Find Consultants. ► 2008. (7). Labels: Dimensions , Families , Parameters , Practice , Schedules. 1 comment: Aaron Ellsworth. Revit Learning Club.

Revit 58

Revit CAD BIM nemetschek AllPlan 58

Revit Beginners

AUGUST 3, 2010

build your as-built model in the existing phase. Once an as-built model is done you might want to archive a copy of the model just incase the design scope changes and you have to start all over again with a clean as-built. The model builder is going to have to do partial demolition of walls, floors, roofs, ceilings, etc.

Remodeling 49

Remodeling Revit BIM CAD 49

Revit Beginners

MARCH 23, 2007

In an Architectural Record article " Getting on Board with Building Information Modeling " Larry Flynn describes a Data Manager as someone "responsible for coordinating the various computer files and models that are integrated into a BIM." In our office Data Managers are starting to inspect models for proper construction.

Revit 40

Revit Management CAD BIM 40

Revit Beginners

OCTOBER 25, 2006

Once you have your building(s) modelled start a new project. Link your building(s) into your new site model and adjust their elevation and orientation so they are properly located in the topography. While in your site model goto Tools. Save your site model. Revit Zone. Find Consultants. Shared Coordinates.

Revit 40

Revit Site CAD BIM 40

Revit Beginners

JULY 23, 2010

like the change is some new data for the model. I upgraded a model once, from Revit 2009 to Revit 2011, and an odd thing happened. This can reset data in the model. Revit Zone. Find Consultants. ► 2008. (7). Im not talking about changing a value and then hitting the undo command. David Duarte.

Revit 40

Revit CAD BIM Autodesk 40

Revit Beginners

DECEMBER 7, 2006

The more accurate the information in your Revit model the more you can do with it. Models from different consultants (who use software other than Revit to model) can be combined for analysis and clash detection. Design Review – Export Revit models into the DWF format for project managers to markup.

Revit 40

Revit Autodesk CAD BIM 40

Revit Beginners

DECEMBER 5, 2006

Revit Zone. Find Consultants. ► 2008. (7). For instance you can combine custom room schedules with color fill plans (drafting. Revit Learning Club. Revit OpEd. Revit Rants. Revit Rocks. Revit Rockstar. Revit ScratchPad. Revit the Frog. Revit the Kid. Revit TOTD. Revit Unplugged. Revit-MBA (spanish). Revit3D.com.

Revit 40

Revit CAD nemetschek AllPlan BIM 40

Revit Beginners

MARCH 28, 2008

Friday, March 28, 2008. It occured to me that I never once posted pictures of any project I worked on, so here are two images from a model I built back in Revit 4.5. We got our feet wet with 3D modeling and didnt try to do condocs until I was confident I could troubleshoot any Revit issues. Revit Zone. Find Consultants.

Revit 40

Revit CAD BIM Autodesk 40

Revit Beginners

AUGUST 3, 2006

Do you ever accidentally drag a wall or other model object across the screen when you didnt intend to move it? It might be nice if Revit would let you pick and choose which model and annotation objects can be moved with the Press + Drag option. Revit Zone. Find Consultants. ► 2008. (7). Press + Drag.

Revit 40

Revit CAD nemetschek AllPlan BIM 40

Revit Beginners

APRIL 20, 2009

you can draw a simple building and link in a simple building (by shared coordinates) and move these two icons around a bit (clipped and unclipped) to see how the two models react or. Revit Zone. Find Consultants. here is the simplest way I can put it: 1. There are now 3 coordinate systems in Revit. Clipping the Survey Point.

Revit 40

Revit CAD BIM Autodesk 40

Revit Beginners

DECEMBER 4, 2006

The Building Information Modelling/Management concept (its past, present, and likely future). And unique modelling, documenting, and implimenting methods utilized by others in the Revit community. Revit Zone. Find Consultants. ► 2008. (7). I now have a better understanding of: 1. Revit Learning Club.

Revit 40

Revit CAD nemetschek AllPlan BIM 40

Revit Beginners

MARCH 5, 2007

Are you having trouble distinguishing detail lines from model lines in a view? Well, the easiest way to separate view specific content from model content in a view is to place a temporary filled region with a Solid Fill Pattern that covers the entire view (choose a neutral color). Display Model. Revit Zone. By Category.

Revit 40

Revit CAD BIM nemetschek AllPlan 40

Revit Beginners

JANUARY 20, 2010

Some food for thought: Could it (read that as "it will") be better to let the walls be modeled as they will be built (with dead spaces in between), rather than using in-place walls that simply mimic old methodologies, like CAD or Hand drawn lines filled with poche or hatching? It is more suited to a model that is about graphics.

Revit 40

Revit CAD BIM Autodesk 40

Buisness Facilities Contributed Content

FEBRUARY 26, 2014

Mesa Mayor Scott Smith, City Manager Chris Brady and Economic Development Director Bill Jabjiniak assisted Apple with its Foreign Trade Zone application to provide real and personal property tax relief for Apple’s investment in the Mesa site. Mesa also processed the required permits expeditiously.

Deals 107

Deals Georgia Arizona Atlanta 107

Revit Beginners

AUGUST 21, 2006

This isnt necessarily a bad habit as long as they are using detail lines and not model lines (detail lines are view specific but model lines will show up everywhere). The Revit 3D model is just a place to start. Revit Zone. Find Consultants. ► 2008. (7). Read the article here. Revit Learning Club.

Revit 40

Revit CAD BIM nemetschek AllPlan 40

Revit Beginners

OCTOBER 17, 2006

Laura Handler is a Building Information Modeller with Tocci Building Corporation. Revit Zone. Find Consultants. ► 2008. (7). Contractors are starting to take a serious look at the BIM movement. If youre curious about what theyre up to (bim) x is a new blog with a focus on BIM for contractors. David Duarte.

Revit 40

Revit BIM CAD nemetschek AllPlan 40

Revit OpEd

JUNE 13, 2012

These divisions, while relevant to the architectural model, are ruining the possibilities of creating gbXML files without extensive work on the part of the engineer to remove the room separation lines, and then repair the damage done to the room names and numbers. Joe - in the examples he offered it isn't "poor" modeling.

Revit 76

Revit Zoning Autodesk Modeling 76

Revit Beginners

OCTOBER 26, 2006

Youll also find a Revit model of Calatravas Turning Torso project in Malmö, Sweden. See how it was modelled. Hello David, I want to use bar grating or grate lock or any kind of grade in the floor and the stairs in my revit model, if you know anyway could you please let me know? Revit Zone. Find Consultants.

Revit 40

Revit CAD BIM ArchiCAD 40

Revit Beginners

SEPTEMBER 27, 2006

elevations, sections, 3D views, etc (similar to model lines) and youll have to adjust its visibility one view at a time. and Import your linked survey then it will export with the rest of your model to DWG format. The survey needs to be a part of the Revit model or Revit wont consider it when exporting your site plan to DWG.

Revit 40

Revit Site Plans CAD 40

Revit Beginners

JANUARY 13, 2007

Specify Coordinates at a point) While Spot Coordinates will report the coordinates of any model or drafting element it is not really clear in the help files that Spot Elevations will report the elevation of only certain parts of model elements. Revit Zone. Find Consultants. ► 2008. (7). Revit Learning Club.

Revit 40

Revit CAD BIM nemetschek AllPlan 40

Revit Beginners

OCTOBER 19, 2006

It loaded viewing the model from the bottom of the floor, under the building. I tried to reload it and checked as many settings as I could in Revit to try and find out why the model loaded this way in Impression. Revit Zone. Find Consultants. ► 2008. (7). Got any ideas why this would happen? Post a Comment.

Revit 40

Revit Autodesk CAD BIM 40

Revit Beginners

SEPTEMBER 29, 2006

This might be one way to model a niche. Revit Zone. Find Consultants. ► 2008. (7). This behavior may be automatic for some curtain walls (like the storefront curtain wall). Go to the Type Properties of a Curtain Wall and youll notice a parameter called Automatically Embed. David Duarte. at 10:57 PM. Labels: Walls.

Revit 40

Revit CAD nemetschek AllPlan nemetschek Vectorworks 40

Revit Beginners

SEPTEMBER 12, 2006

Did you model a rough opening height for your window that has say a sloping sill and now your head height is not accurate in your schedule? Revit Zone. Find Consultants. ► 2008. (7). This blog will highlight some of the common questions and cool tips found in the process of transitioning our office to Revit.

Revit 40

Revit CAD BIM nemetschek AllPlan 40

Do

JULY 26, 2011

Reading this article comes on the heels of a recent Lunch & Learn I attended by the Co-President of Vermillion Cost Consulting , where he was pretty much saying the same thing( 4 ). This issue gets compounded when you also have in-house databases that host more information that should be shared with a Model or other databases.

Revit 54

Revit iPad Innovation BIM 54

Revit Beginners

SEPTEMBER 22, 2006

It has helped to model furniture familt easily. Revit Zone. Find Consultants. ► 2008. (7). Open and youll see the same icons so you can add all your project directories too. David Duarte. at 9:55 AM. Labels: Families. 1 comment: manisha. This is great.b Thank you for a such an information. Post a Comment.

Revit 40

Revit CAD nemetschek AllPlan BIM 40

Revit Beginners

JULY 22, 2006

We often have split level projects and weve had a lot of trouble isolating the stem walls and footings from the rest of the model for use in a foundation plan. In Visibility/Graphics go to Model Categories and uncheck everything except Detail Items and Walls. Revit Zone. Find Consultants. ► 2008. (7).

Revit 40

Revit Foundation Plans CAD 40

Revit Beginners

OCTOBER 10, 2006

Weve noticed performance hits when modeling large topography surfaces and turning on shadows in any view. Revit Zone. Find Consultants. ► 2008. (7). Revit Performance. Because we do a lot of high-end residential design most of our projects are very detailed and put Revits performance to the test. Revit OpEd.

Revit 40

Revit CAD Autodesk BIM 40

Pro Builder

DECEMBER 2, 2020

million in revenue in 2020, up 19% and 12%, respectively, from 2019 (and gross margins that have consistently exceeded 20% since 2008), which is even more impressive in a year of uncertainty. A New Model for Success. million in revenue in 2008 to 620 closings and $117 million by 2012. When it all comes together.

Charlotte 98

Charlotte Management Organization North Carolina 98

Pro Builder

DECEMBER 2, 2020

million in revenue in 2020, up 19% and 12%, respectively, from 2019 (and gross margins that have consistently exceeded 20% since 2008), which is even more impressive in a year of uncertainty. A New Model for Success. million in revenue in 2008 to 620 closings and $117 million by 2012. When it all comes together.

Charlotte 98

Charlotte Management Organization North Carolina 98

Revit Beginners

AUGUST 23, 2006

If you want to do cost estimating outside of Revit you might try exporting the Revit model as an ODBC and importing the database into Timberline. Revit Zone. Find Consultants. ► 2008. (7). Only use Material Takeoff Schedules when you want to schedule every material that is used in the door/window family separately.

Revit 61

Revit Estimating CAD Schedule 61

Revit Beginners

OCTOBER 4, 2006

When you model your geometry give it a material called "Variable" or some other material name that is not used in your project file. Revit Zone. Find Consultants. ► 2008. (7). Is there any way one can have a material that shows in a view an not in other. David Duarte. Yes you can. Revit Learning Club. Revit OpEd.

Revit 40

Revit Materials CAD BIM 40