Revit Beginners

MARCH 26, 2010

Ive been teaching our office how to use Revit Architecture. Lets say you have a project with worksets enabled and the whole model is on Workset 1 by default. No one else is going to be able to edit ANY modeled elements that are on that workset. Im a Revit Beginner with an architectural office in Santa Barbara. CAD Digest.

Revit 40

Revit CAD BIM nemetschek AllPlan 40

Revit Beginners

JULY 31, 2009

Ive been teaching our office how to use Revit Architecture. Always Be Phase Aware In every project file your modeled components have a phase created and a phase demolished parameter whether you like it or not. As you start to model your proposed design distinguishing between existing and proposed content becomes ever more critical.

Revit 40

Revit CAD BIM nemetschek AllPlan 40

Revit Beginners

NOVEMBER 11, 2008

Ive been teaching our office how to use Revit Architecture. You just linked a developed Revit model into a new project file and you cant seem to find it. If I just imported a project and I cant seem to locate the imported model the first thing I do is setup my radar. National CAD Standards. CAD Digest. Newer Post.

Revit 40

Revit CAD nemetschek AllPlan BIM 40

Revit Beginners

JUNE 24, 2010

Ive been teaching our office how to use Revit Architecture. Having built a few parametric families, here is my experience: The dimensions that are variable or can flex need to be modeled before any actual geometry. Im a Revit Beginner with an architectural office in Santa Barbara. National CAD Standards. CAD Digest.

Revit 58

Revit CAD BIM nemetschek AllPlan 58

Revit Beginners

AUGUST 19, 2009

Ive been teaching our office how to use Revit Architecture. We have one model that was started in Revit before we knew any of the limitations of Revit. The model is not clean enough to develop construction documents so we have passed along that task to another architect. National CAD Standards. CAD Digest.

Revit 40

Revit CAD BIM nemetschek AllPlan 40

Revit Beginners

AUGUST 21, 2006

Ive been teaching our office how to use Revit Architecture. This isnt necessarily a bad habit as long as they are using detail lines and not model lines (detail lines are view specific but model lines will show up everywhere). The Revit 3D model is just a place to start. National CAD Standards. CAD Digest.

Revit 40

Revit CAD BIM nemetschek AllPlan 40

Revit OpEd

MAY 9, 2012

When Revit Systems was released in 2006, the essence of Autodesks marketing commentary was, "this is new software so it probably doesnt make sense to tackle a project with it unless the architecture team is using Revit too." Why assume that there is no value in creating a model of the MEP scope of work even if the architect doesnt use Revit?

Revit 61

Revit Autodesk Architecture Modeling 61

Revit Beginners

JUNE 27, 2008

Ive been teaching our office how to use Revit Architecture. How do you model the roof and ridge roll? How do you model the roof such that the roof tile is all in 3D? If you want to 3d model all the roof tiles there is a shortcut posted on AUGI using sloped glazing. National CAD Standards. CAD Digest.

Revit 40

Revit CAD nemetschek AllPlan BIM 40

Revit Beginners

SEPTEMBER 4, 2008

Ive been teaching our office how to use Revit Architecture. Im a Revit Beginner with an architectural office in Santa Barbara. National CAD Standards. CAD Digest. Knowing CAD. Marathon Drafting. CAD Block Exchange. CAD Beyond. CAD Beyond. CAD vs BIM. Revit Beginners. David Duarte.

Revit 40

Revit CAD nemetschek AllPlan nemetschek Vectorworks 40

Revit Beginners

JULY 23, 2010

Ive been teaching our office how to use Revit Architecture. like the change is some new data for the model. I upgraded a model once, from Revit 2009 to Revit 2011, and an odd thing happened. This can reset data in the model. Im a Revit Beginner with an architectural office in Santa Barbara. National CAD Standards.

Revit 40

Revit CAD BIM Autodesk 40

Revit Beginners

MARCH 21, 2007

Ive been teaching our office how to use Revit Architecture. Take a look around and youll find that Revit model data is being exported to other applications for many uses. Here is a short list of uses for which Revit model data is being exported. Im a Revit Beginner with an architectural office in Santa Barbara.

Revit 40

Revit News CAD nemetschek AllPlan 40

Revit OpEd

JUNE 14, 2012

The other issue is when the data in the CAD file is small enough in extents but really far away from the files origin, according to the WCS which is all Revit really pays any attention to. This manifests itself in snap icons that appear to miss the element we are attempting to reference in the CAD file. Yes, that's 69 million.

Revit 72

Revit CAD Autodesk Architecture 72

Revit Beginners

AUGUST 3, 2010

Ive been teaching our office how to use Revit Architecture. build your as-built model in the existing phase. Once an as-built model is done you might want to archive a copy of the model just incase the design scope changes and you have to start all over again with a clean as-built. skip to main | skip to sidebar.

Remodeling 49

Remodeling Revit BIM CAD 49

Revit OpEd

DECEMBER 21, 2010

Journal files - C:Program FilesAutodeskRevit Architecture 2011Journals - Revit creates these files as you work. Importlineweights-xxx.txt - C:Program FilesAutodeskRevit xxx 2011Data (XP Location) - These files are used to define how imported cad file elements are interpreted to use different lineweights within Revit.

Revit 49

Revit CAD Architecture Autodesk 49

Revit Beginners

OCTOBER 26, 2006

Ive been teaching our office how to use Revit Architecture. Edward Borg of Precision Drafting LLC has a dedicated FTP site for sharing cool Revit Project Templates and Families. Edward Borg of Precision Drafting LLC has a dedicated FTP site for sharing cool Revit Project Templates and Families. See how it was modelled.

Revit 40

Revit CAD BIM ArchiCAD 40

Revit Beginners

AUGUST 3, 2006

Ive been teaching our office how to use Revit Architecture. Do you ever accidentally drag a wall or other model object across the screen when you didnt intend to move it? It might be nice if Revit would let you pick and choose which model and annotation objects can be moved with the Press + Drag option. National CAD Standards.

Revit 40

Revit CAD nemetschek AllPlan BIM 40

Revit Beginners

MARCH 23, 2007

Ive been teaching our office how to use Revit Architecture. In an Architectural Record article " Getting on Board with Building Information Modeling " Larry Flynn describes a Data Manager as someone "responsible for coordinating the various computer files and models that are integrated into a BIM." National CAD Standards.

Revit 40

Revit Management CAD BIM 40

Revit Beginners

APRIL 20, 2009

Ive been teaching our office how to use Revit Architecture. you can draw a simple building and link in a simple building (by shared coordinates) and move these two icons around a bit (clipped and unclipped) to see how the two models react or. Im a Revit Beginner with an architectural office in Santa Barbara. Revit Beginners.

Revit 40

Revit CAD BIM Autodesk 40

Revit Beginners

JANUARY 20, 2010

Ive been teaching our office how to use Revit Architecture. We used to complain that CAD drawings looked horrible and now that concept has nearly been forgotten. Plus in-place families detract from performance of the team, model and file. What you get out of your model depends on what you put into it. Revit Beginners.

Revit 40

Revit CAD BIM Autodesk 40

Revit Beginners

APRIL 25, 2007

Ive been teaching our office how to use Revit Architecture. Some people have to be reminded that the project file is a database and like any database the more and accurate information about the project you put into the model the more analytical modeling and scheduling you can get out of the model. National CAD Standards.

Revit 40

Revit CAD BIM Autodesk 40

Revit Beginners

OCTOBER 19, 2006

Ive been teaching our office how to use Revit Architecture. I just ran across this old post while searching for a way to upload Impression for a Presentation project Im doing in Architectural Drafting school. It loaded viewing the model from the bottom of the floor, under the building. National CAD Standards.

Revit 40

Revit Autodesk CAD BIM 40

Revit Beginners

OCTOBER 25, 2006

Ive been teaching our office how to use Revit Architecture. Once you have your building(s) modelled start a new project. Link your building(s) into your new site model and adjust their elevation and orientation so they are properly located in the topography. While in your site model goto Tools. Save your site model.

Revit 40

Revit Site CAD BIM 40

Revit Beginners

DECEMBER 4, 2006

Ive been teaching our office how to use Revit Architecture. The Building Information Modelling/Management concept (its past, present, and likely future). The Building Information Modelling/Management concept (its past, present, and likely future). Im a Revit Beginner with an architectural office in Santa Barbara.

Revit 40

Revit CAD nemetschek AllPlan BIM 40

Revit Beginners

MARCH 5, 2007

Ive been teaching our office how to use Revit Architecture. Are you having trouble distinguishing detail lines from model lines in a view? All view specific content will pop out and all model content will be hidden behind your Filled Region. and floating your mouse over the model to "scan" for where it may have been used.

Revit 40

Revit CAD BIM nemetschek AllPlan 40

Revit Beginners

SEPTEMBER 27, 2006

Ive been teaching our office how to use Revit Architecture. CAD Formats. elevations, sections, 3D views, etc (similar to model lines) and youll have to adjust its visibility one view at a time. and Import your linked survey then it will export with the rest of your model to DWG format. National CAD Standards.

Revit 40

Revit Site Plans CAD 40

Revit Beginners

DECEMBER 5, 2006

Ive been teaching our office how to use Revit Architecture. For instance you can combine custom room schedules with color fill plans (drafting. Im a Revit Beginner with an architectural office in Santa Barbara. National CAD Standards. CAD Digest. Knowing CAD. Marathon Drafting. CAD Block Exchange.

Revit 40

Revit CAD nemetschek AllPlan BIM 40

Revit Beginners

JANUARY 13, 2007

Ive been teaching our office how to use Revit Architecture. Specify Coordinates at a point) While Spot Coordinates will report the coordinates of any model or drafting element it is not really clear in the help files that Spot Elevations will report the elevation of only certain parts of model elements. CAD Digest.

Revit 40

Revit CAD BIM nemetschek AllPlan 40

Revit Beginners

OCTOBER 17, 2006

Ive been teaching our office how to use Revit Architecture. Laura Handler is a Building Information Modeller with Tocci Building Corporation. Im a Revit Beginner with an architectural office in Santa Barbara. National CAD Standards. CAD Digest. Knowing CAD. Marathon Drafting. CAD Block Exchange.

Revit 40

Revit BIM CAD nemetschek AllPlan 40

Revit Beginners

MARCH 28, 2008

Ive been teaching our office how to use Revit Architecture. It occured to me that I never once posted pictures of any project I worked on, so here are two images from a model I built back in Revit 4.5. My boss asked me to put a project we did in CAD into ReVit. Im a Revit Beginner with an architectural office in Santa Barbara.

Revit 40

Revit CAD BIM Autodesk 40

Revit Beginners

SEPTEMBER 29, 2006

Ive been teaching our office how to use Revit Architecture. This might be one way to model a niche. Im a Revit Beginner with an architectural office in Santa Barbara. National CAD Standards. CAD Digest. Knowing CAD. Marathon Drafting. CAD Block Exchange. CAD Beyond. Revit Beginners.

Revit 40

Revit CAD nemetschek AllPlan nemetschek Vectorworks 40

Revit Beginners

DECEMBER 7, 2006

Ive been teaching our office how to use Revit Architecture. The more accurate the information in your Revit model the more you can do with it. Models from different consultants (who use software other than Revit to model) can be combined for analysis and clash detection. Revit Beginners. Thursday, December 07, 2006.

Revit 40

Revit Autodesk CAD BIM 40

Revit Beginners

SEPTEMBER 12, 2006

Ive been teaching our office how to use Revit Architecture. Did you model a rough opening height for your window that has say a sloping sill and now your head height is not accurate in your schedule? Im a Revit Beginner with an architectural office in Santa Barbara. National CAD Standards. CAD Digest. Knowing CAD.

Revit 40

Revit CAD BIM nemetschek AllPlan 40

Pro Builder

APRIL 7, 2021

Education • BS, Architecture, Lawrence Technological University. Identified approximately $10 million in potential savings as an architectural consultant conducting Lean Week training and workshops across the country . Extracurricular • Architectural consultant, True North Development. TK Design & Associates.

Industrial 98

Industrial El Paso Education Cleveland 98

Revit Beginners

AUGUST 23, 2006

Ive been teaching our office how to use Revit Architecture. If you want to do cost estimating outside of Revit you might try exporting the Revit model as an ODBC and importing the database into Timberline. Im a Revit Beginner with an architectural office in Santa Barbara. National CAD Standards. CAD Digest.

Revit 61

Revit Estimating CAD Schedule 61

Revit Beginners

SEPTEMBER 22, 2006

Ive been teaching our office how to use Revit Architecture. It has helped to model furniture familt easily. Im a Revit Beginner with an architectural office in Santa Barbara. National CAD Standards. CAD Digest. Knowing CAD. Marathon Drafting. CAD Block Exchange. CAD Beyond. Newer Post.

Revit 40

Revit CAD nemetschek AllPlan BIM 40

Revit Beginners

OCTOBER 10, 2006

Ive been teaching our office how to use Revit Architecture. Weve noticed performance hits when modeling large topography surfaces and turning on shadows in any view. Im a Revit Beginner with an architectural office in Santa Barbara. National CAD Standards. CAD Digest. Knowing CAD. Marathon Drafting.

Revit 40

Revit CAD Autodesk BIM 40

Revit Beginners

JULY 22, 2006

Ive been teaching our office how to use Revit Architecture. We often have split level projects and weve had a lot of trouble isolating the stem walls and footings from the rest of the model for use in a foundation plan. In Visibility/Graphics go to Model Categories and uncheck everything except Detail Items and Walls.

Revit 40

Revit Foundation Plans CAD 40