Revit Beginners

NOVEMBER 11, 2008

You just linked a developed Revit model into a new project file and you cant seem to find it. If I just imported a project and I cant seem to locate the imported model the first thing I do is setup my radar. Open each view individually and zoom all (ZA) until you find the model you are looking for. National CAD Standards.

Revit 40

Revit CAD nemetschek AllPlan BIM 40

Revit Beginners

JUNE 24, 2010

Having built a few parametric families, here is my experience: The dimensions that are variable or can flex need to be modeled before any actual geometry. National CAD Standards. CAD Digest. Knowing CAD. CAD Block Exchange. Google Sketchup. CAD Beyond. CAD Beyond. CAD vs BIM. BIM & BEAM.

Revit 58

Revit CAD BIM nemetschek AllPlan 58

Revit Beginners

AUGUST 19, 2009

We have one model that was started in Revit before we knew any of the limitations of Revit. The model is not clean enough to develop construction documents so we have passed along that task to another architect. National CAD Standards. CAD Digest. Knowing CAD. David Duarte. at 3:06 PM. 1 comment: antman.

Revit 40

Revit CAD BIM nemetschek AllPlan 40

Revit Beginners

JUNE 27, 2008

How do you model the roof and ridge roll? How do you model the roof such that the roof tile is all in 3D? If you want to 3d model all the roof tiles there is a shortcut posted on AUGI using sloped glazing. National CAD Standards. CAD Digest. Knowing CAD. CAD Block Exchange. Google Sketchup.

Revit 40

Revit CAD nemetschek AllPlan BIM 40

Revit Beginners

AUGUST 3, 2010

build your as-built model in the existing phase. Once an as-built model is done you might want to archive a copy of the model just incase the design scope changes and you have to start all over again with a clean as-built. The model builder is going to have to do partial demolition of walls, floors, roofs, ceilings, etc.

Remodeling 49

Remodeling Revit BIM CAD 49

Revit Beginners

JULY 23, 2010

like the change is some new data for the model. I upgraded a model once, from Revit 2009 to Revit 2011, and an odd thing happened. This can reset data in the model. National CAD Standards. CAD Digest. Knowing CAD. Im not talking about changing a value and then hitting the undo command. David Duarte.

Revit 40

Revit CAD BIM Autodesk 40

Revit Beginners

SEPTEMBER 4, 2008

National CAD Standards. CAD Digest. Knowing CAD. CAD Block Exchange. Google Sketchup. CAD Beyond. CAD Beyond. CAD vs BIM. Journal of Building Information Modeling. I was introduced to Revit 4.5 in 2002 and am currently a member of AUGI. View my complete profile. Laiserin Letter Debate.

Revit 40

Revit CAD nemetschek AllPlan nemetschek Vectorworks 40

Revit Beginners

MARCH 21, 2007

Take a look around and youll find that Revit model data is being exported to other applications for many uses. Here is a short list of uses for which Revit model data is being exported. National CAD Standards. CAD Digest. Knowing CAD. CAD Block Exchange. Google Sketchup. CAD Beyond.

Revit 40

Revit News CAD nemetschek AllPlan 40

Revit Beginners

JANUARY 20, 2010

Some food for thought: Could it (read that as "it will") be better to let the walls be modeled as they will be built (with dead spaces in between), rather than using in-place walls that simply mimic old methodologies, like CAD or Hand drawn lines filled with poche or hatching? National CAD Standards. CAD Digest.

Revit 40

Revit CAD BIM Autodesk 40

Revit Beginners

MARCH 23, 2007

In an Architectural Record article " Getting on Board with Building Information Modeling " Larry Flynn describes a Data Manager as someone "responsible for coordinating the various computer files and models that are integrated into a BIM." In our office Data Managers are starting to inspect models for proper construction.

Revit 40

Revit Management CAD BIM 40

Revit Beginners

APRIL 20, 2009

you can draw a simple building and link in a simple building (by shared coordinates) and move these two icons around a bit (clipped and unclipped) to see how the two models react or. National CAD Standards. CAD Digest. here is the simplest way I can put it: 1. There are now 3 coordinate systems in Revit. David Duarte.

Revit 40

Revit CAD BIM Autodesk 40

Revit Beginners

OCTOBER 25, 2006

Once you have your building(s) modelled start a new project. Link your building(s) into your new site model and adjust their elevation and orientation so they are properly located in the topography. While in your site model goto Tools. Save your site model. National CAD Standards. CAD Digest. Manage Links.

Revit 40

Revit Site CAD BIM 40

Revit Beginners

APRIL 25, 2007

Some people have to be reminded that the project file is a database and like any database the more and accurate information about the project you put into the model the more analytical modeling and scheduling you can get out of the model. National CAD Standards. CAD Digest. Knowing CAD. CAD Block Exchange.

Revit 40

Revit CAD BIM Autodesk 40

Revit OpEd

MAY 9, 2012

Sure we benefit from the modelling effort in architecture and structure but we can still benefit from the effort without them. Why assume that there is no value in creating a model of the MEP scope of work even if the architect doesnt use Revit? Modeling a project reveals more than doing one in 2D. Nice insight Steve.

Revit 61

Revit Autodesk Architecture Modeling 61

Revit Beginners

AUGUST 3, 2006

Do you ever accidentally drag a wall or other model object across the screen when you didnt intend to move it? It might be nice if Revit would let you pick and choose which model and annotation objects can be moved with the Press + Drag option. National CAD Standards. CAD Digest. Knowing CAD. CAD Block Exchange.

Revit 40

Revit CAD nemetschek AllPlan BIM 40

Revit Beginners

SEPTEMBER 27, 2006

CAD Formats. elevations, sections, 3D views, etc (similar to model lines) and youll have to adjust its visibility one view at a time. and Import your linked survey then it will export with the rest of your model to DWG format. National CAD Standards. CAD Digest. Knowing CAD. Under File. Import/Link.

Revit 40

Revit Site Plans CAD 40

Revit Beginners

DECEMBER 4, 2006

The Building Information Modelling/Management concept (its past, present, and likely future). And unique modelling, documenting, and implimenting methods utilized by others in the Revit community. National CAD Standards. CAD Digest. Knowing CAD. CAD Block Exchange. Google Sketchup. CAD Beyond.

Revit 40

Revit CAD nemetschek AllPlan BIM 40

Revit Beginners

MARCH 5, 2007

Are you having trouble distinguishing detail lines from model lines in a view? Well, the easiest way to separate view specific content from model content in a view is to place a temporary filled region with a Solid Fill Pattern that covers the entire view (choose a neutral color). Display Model. National CAD Standards.

Revit 40

Revit CAD BIM nemetschek AllPlan 40

Revit Beginners

AUGUST 21, 2006

This isnt necessarily a bad habit as long as they are using detail lines and not model lines (detail lines are view specific but model lines will show up everywhere). The Revit 3D model is just a place to start. National CAD Standards. CAD Digest. Knowing CAD. CAD Block Exchange. Google Sketchup.

Revit 40

Revit CAD BIM nemetschek AllPlan 40

Building Information Management

DECEMBER 2, 2012

Building information modeling (BIM) is beginning to fundamentally change the building industry in a very positive way. Tom Gay manages worldwide CAD and GIS services, site plan documentation and engineering document management services for The Factory Mutual Insurance Company (FM Global). David Quigley , East Coast CAD/CAM. .

BIM 45

BIM Conference Education CAD 45

Revit Beginners

OCTOBER 17, 2006

Laura Handler is a Building Information Modeller with Tocci Building Corporation. National CAD Standards. CAD Digest. Knowing CAD. CAD Block Exchange. Google Sketchup. CAD Beyond. CAD Beyond. CAD vs BIM. Contractors are starting to take a serious look at the BIM movement. David Duarte.

Revit 40

Revit BIM CAD nemetschek AllPlan 40

Revit Beginners

OCTOBER 26, 2006

Youll also find a Revit model of Calatravas Turning Torso project in Malmö, Sweden. See how it was modelled. Hello David, I want to use bar grating or grate lock or any kind of grade in the floor and the stairs in my revit model, if you know anyway could you please let me know? National CAD Standards. CAD Digest.

Revit 40

Revit CAD BIM ArchiCAD 40

Revit Beginners

DECEMBER 7, 2006

The more accurate the information in your Revit model the more you can do with it. Models from different consultants (who use software other than Revit to model) can be combined for analysis and clash detection. Design Review – Export Revit models into the DWF format for project managers to markup. Applications.

Revit 40

Revit Autodesk CAD BIM 40

Building Information Management

DECEMBER 2, 2012

Building information modeling (BIM) is beginning to fundamentally change the building industry in a very positive way. Tom Gay manages worldwide CAD and GIS services, site plan documentation and engineering document management services for The Factory Mutual Insurance Company (FM Global). David Quigley , East Coast CAD/CAM. .

BIM 40

BIM Conference Education CAD 40

Revit Beginners

MARCH 28, 2008

It occured to me that I never once posted pictures of any project I worked on, so here are two images from a model I built back in Revit 4.5. My boss asked me to put a project we did in CAD into ReVit. We got our feet wet with 3D modeling and didnt try to do condocs until I was confident I could troubleshoot any Revit issues.

Revit 40

Revit CAD BIM Autodesk 40

Building Information Management

AUGUST 29, 2012

BIM is the life-cycle modeling and management of the built environment supported by digital technology. First, a few clarifications and items to help frame this discussion: BIM definition: “BIM is the life-cycle modeling and management of the built environment supported by digital technology.” INTRODUCTION.

BIM 74

BIM Life Cycle Organization Management 74

Revit Beginners

JANUARY 13, 2007

Specify Coordinates at a point) While Spot Coordinates will report the coordinates of any model or drafting element it is not really clear in the help files that Spot Elevations will report the elevation of only certain parts of model elements. National CAD Standards. CAD Digest. Knowing CAD. CAD Block Exchange.

Revit 40

Revit CAD BIM nemetschek AllPlan 40

Revit Beginners

SEPTEMBER 29, 2006

This might be one way to model a niche. National CAD Standards. CAD Digest. Knowing CAD. CAD Block Exchange. Google Sketchup. CAD Beyond. CAD Beyond. CAD vs BIM. This behavior may be automatic for some curtain walls (like the storefront curtain wall). David Duarte. at 10:57 PM.

Revit 40

Revit CAD nemetschek AllPlan nemetschek Vectorworks 40

Revit Beginners

OCTOBER 19, 2006

It loaded viewing the model from the bottom of the floor, under the building. I tried to reload it and checked as many settings as I could in Revit to try and find out why the model loaded this way in Impression. National CAD Standards. CAD Digest. Knowing CAD. CAD Block Exchange. Google Sketchup.

Revit 40

Revit Autodesk CAD BIM 40

Revit Beginners

SEPTEMBER 12, 2006

Did you model a rough opening height for your window that has say a sloping sill and now your head height is not accurate in your schedule? National CAD Standards. CAD Digest. Knowing CAD. CAD Block Exchange. Google Sketchup. CAD Beyond. CAD Beyond. CAD vs BIM. This is why. Revit Frappr.

Revit 40

Revit CAD BIM nemetschek AllPlan 40

Revit Beginners

DECEMBER 5, 2006

National CAD Standards. CAD Digest. Knowing CAD. CAD Block Exchange. Google Sketchup. CAD Beyond. CAD Beyond. CAD vs BIM. For instance you can combine custom room schedules with color fill plans (drafting. I was introduced to Revit 4.5 in 2002 and am currently a member of AUGI. Autodesk Seek.

Revit 40

Revit CAD nemetschek AllPlan BIM 40

Revit Beginners

SEPTEMBER 22, 2006

It has helped to model furniture familt easily. National CAD Standards. CAD Digest. Knowing CAD. CAD Block Exchange. Google Sketchup. CAD Beyond. CAD Beyond. CAD vs BIM. Open and youll see the same icons so you can add all your project directories too. David Duarte. at 9:55 AM.

Revit 40

Revit CAD nemetschek AllPlan BIM 40

Revit Beginners

OCTOBER 10, 2006

Weve noticed performance hits when modeling large topography surfaces and turning on shadows in any view. National CAD Standards. CAD Digest. Knowing CAD. CAD Block Exchange. Google Sketchup. CAD Beyond. CAD Beyond. CAD vs BIM. Revit Performance. So we asked Autodesk a few questions.

Revit 40

Revit CAD Autodesk BIM 40

Revit Beginners

JULY 22, 2006

We often have split level projects and weve had a lot of trouble isolating the stem walls and footings from the rest of the model for use in a foundation plan. In Visibility/Graphics go to Model Categories and uncheck everything except Detail Items and Walls. National CAD Standards. CAD Digest. Knowing CAD.

Revit 40

Revit Foundation Plans CAD 40

Revit Beginners

AUGUST 23, 2006

If you want to do cost estimating outside of Revit you might try exporting the Revit model as an ODBC and importing the database into Timberline. National CAD Standards. CAD Digest. Knowing CAD. CAD Block Exchange. Google Sketchup. CAD Beyond. CAD Beyond. CAD vs BIM. David Duarte.

Revit 61

Revit Estimating CAD Schedule 61

Do

JULY 26, 2011

The first thing is I dont think the next big innovation will really be in what we might call the traditional "CAD (Computer Aided Design)" space. This issue gets compounded when you also have in-house databases that host more information that should be shared with a Model or other databases. What am I interested in?

Revit 54

Revit iPad Innovation BIM 54

Revit Beginners

OCTOBER 4, 2006

When you model your geometry give it a material called "Variable" or some other material name that is not used in your project file. National CAD Standards. CAD Digest. Knowing CAD. CAD Block Exchange. Google Sketchup. CAD Beyond. CAD Beyond. CAD vs BIM. David Duarte. Yes you can.

Revit 40

Revit Materials CAD BIM 40