Safety Services Company

JANUARY 7, 2013

Injury & Illness Prevention Program Highlights OSHA’s 2013 Priorities. The implementation of a new standard requiring employers to adopt and Injury and Illness Prevention Program (I2P2) highlights OSHA’s 2013 regulatory agenda. Here is a brief look at the most pertinent agenda items.

Injury 55

Injury OSHA Safety Regulation 55

Construction Marketing

DECEMBER 19, 2022

Moving heavy structures on a construction site requires careful planning and sometimes specialized lifting equipment for assistance. Building regulations make it necessary for commercial buildings to adhere to safety guidelines like installing stair railings to prevent fall injuries. Concrete Is Heavy. Repairs Are Problematic.

Commercial 156

Commercial Concrete Materials Regulation 156

Work Gearz

OCTOBER 19, 2021

Your Personal Protective Equipment (PPE) keeps you safe in the workplace from hazardous conditions that pose a threat to your safety. Many employees understand the need of wearing personal protection equipment (PPE) while on the job. Not wearing PPE can result in severe injury to yourself and to others around you.

Injury 52

Injury Accidents Safety Risk 52

Safety Services Company

MAY 3, 2021

They were chosen based on the number of accidents and injuries that occur each year at construction workplaces. In fact, the Occupational Safety and Health Administration (OSHA) recommends that employers regularly enforce standards and regulations. Preventing Struck-By Injuries. The Importance of Safety Meetings.

Safety 62

Safety Injury Construction OSHA 62

Safety Services Company

FEBRUARY 5, 2020

Under ideal conditions, the equipment used in the industrial and manufacturing industry is safe to operate and requires almost no supervision. Similar to power sources, injuries that arise from hazardous energy vary. Consequently, Tagout devices are warning equipment that informs workers when to energize the machine.

Guidelines 62

Guidelines OSHA Injury Safety 62

Safety Services Company

FEBRUARY 4, 2020

Under ideal conditions, the equipment used in the industrial and manufacturing industry is safe to operate and requires almost no supervision. Similar to power sources, injuries that arise from hazardous energy vary. Consequently, Tagout devices are warning equipment that informs workers when to energize the machine.

Guidelines 62

Guidelines OSHA Injury Safety 62

Safety Services Company

JULY 19, 2021

Many employers are still trying to figure out what the major changes were and how they might affect them. . Specifically, NFPA 70E contains detailed information on how to protect workers from hazards associated with the installation, inspection, operation, maintenance, or demolition of electrical equipment.

OSHA 75

OSHA Electrical Safety Employment 75

Safety Services Company

OCTOBER 22, 2020

Remember- if they know that an employer is not doing the right things for their people, but there is no direct relationship to a requirement, they can ALWAYS cite under the General Duty Clause (see below). 2) Shall comply with occupational safety and health standards promulgated under this Act. What can you do to avoid penalties?

OSHA 62

OSHA Safety Employment Injury 62

Pro Builder

JULY 28, 2022

Additionally, employers, owners, and managers need to ensure a safe means to enter and exit trenches on jobsites and must keep materials away from trench edges. . The risk of injury or death,” she says, “is just too high.”. Keep all equipment away from the excavation site. Utilizing equipment for water removal.

Safety 98

Safety OSHA Construction Inspections 98

Safety Services Company

SEPTEMBER 23, 2019

Fall Protection is not something that should be taken lightly by any company because the consequences of a breach in policy can result in death or serious injury to workers engaging in work at heights. Fall Protection encompasses all categories that define controls used to prevent injuries resulting from a fall. OSHA Regulations.

OSHA 48

OSHA Innovation Injury Safety 48

Safety Services Company

SEPTEMBER 23, 2019

Fall Protection is not something that should be taken lightly by any company because the consequences of a breach in policy can result in death or serious injury to workers engaging in work at heights. Fall Protection encompasses all categories that define controls used to prevent injuries resulting from a fall. OSHA Regulations.

OSHA 48

OSHA Innovation Injury Safety 48

FDR Safety

NOVEMBER 9, 2012

But I think there is an even better first step – bring outdated regulations into the 21 st Century. Read them today and they talk about equipment that is no longer used and procedures that are no longer relevant. To resume the downward trend, update the OSHA regulations. Getting back on track. They haven’t been updated since.

OSHA 120

OSHA Overhead Regulation Injury 120

Safety Services Company

JULY 20, 2020

Regularly reviewing and training employees to the standard of the applicable codes and regulations is a proactive way to ensure compliance. The layers of OSHA regulation that protect workers focus on proper use and installation of safety systems, supervision, safe work procedures, maintenance and more. Scaffolding.

Safety 68

Safety OSHA Construction Electrical 68

Safety Services Company

FEBRUARY 25, 2015

Answer: OSHA’s applicable regulation is 1910.151(c) : “Where the eyes or body of any person may be exposed to injurious corrosive materials, suitable facilities for quick drenching or flushing of the eyes and body shall be provided within the work area for immediate emergency use.”. In them OSHA refers employers to ANSI Z358.1.

OSHA 48

OSHA Regulation Safety Accidents 48

Safety Services Company

FEBRUARY 12, 2014

Even while creating new regulations and amending current ones to fit the workplace’s changing safety standards, OSHA is hard at work providing guidance material to help employers follow their rules, and answering questions and providing guidance on existing rules. Representatives of employers and employees. April 29, 2013.

OSHA 48

OSHA Regulation Safety Inspections 48

Safety Services Company

APRIL 5, 2018

There are circumstances when OSHA may give less than 24 hours’ notice to the employer. Employers who receive advance notice of an inspection must inform their employees’ representative, or arrange for OSHA to do so. Employers should always ask to see the credentials and verify by calling the nearest OSHA office. Walkthrough.

OSHA 48

OSHA Safety Inspections Employment 48

Pro Builder

AUGUST 5, 2022

Consider these elements of a training and awareness program to save lives, mitigate injuries, and reduce liability and costs . Selective Insurance recently released the results of a 10-year study of workplace injury trends , based on 110,000 workers’ compensation claims between 2011 and 2021. Fri, 08/05/2022 - 07:00.

Safety 72

Safety Resource Injury Construction 72

FDR Safety

JUNE 30, 2016

Yet the consequences of not doing so can be enormous – injuries or fatalities in the workplace, OSHA fines and/or third-party lawsuits, and severe damage to the reputation of the small business that the owner worked so hard to build. Provide appropriate personal protective equipment. This is a path that may cause huge problems.

OSHA 120

OSHA Safety Accidents Injury 120

Construction Business Owner

MAY 17, 2012

EQUIPMENT |. Compliance/Regulations. Equipment Management. Equipment and Services Directory. The company called us to come in and evaluate some of their work stations where they seemed to be getting the most injuries from repetitive motions. MARKETING |. INSURANCE |. General Management. Software & Technology.

Construction 120

Construction Software Software Injury 120

Work Gearz

DECEMBER 8, 2022

A Risk of Foot Injury. Heavy materials and equipment, power tools, and more are all common to construction sites. Slippery surfaces are one of the foremost reasons for injuries at construction sites. They may be waterproof, but they will not necessarily comply with safety regulations for the workplace. 

Construction 52

Construction Safety Injury Electrical 52

Safety Services Company

APRIL 30, 2014

Also an employer may use an insulating link/device manufactured on any date with additional protections such as adequately insulated gloves. The current regulation as it is written puts the cut-off date of non NRTL devices at November 8, 2011. How to Decide It’s a Workplace Injury.

OSHA 55

OSHA Regulation Safety Accidents 55

Safety Services Company

SEPTEMBER 19, 2013

To help ensure employers are following standards developed to mitigate the risk of fall and limit the risk of injury when a fall does occur California formed the RCWG. Cal/OSHA roofing regulations can be found in sections 1730 and 1731 of Title 8 of the California Code of Regulations.

California 48

California Safety Compensation Regulation 48

Work Gearz

OCTOBER 6, 2021

On construction sites, hard hats are the greatest way to protect yourself against serious, life-altering injury or death. And these are enough reasons why you need a protective gear on your head to avoid fatal injuries. Specific criteria for head protection in the workplace are mandated by OSHA regulations. According to OSHA.

OSHA 52

OSHA Safety Accidents Injury 52

Safety Services Company

AUGUST 12, 2021

It helps reduce the number of accidents and injuries in the workplace. Each class also provides overview information regarding OSHA, including workers’ rights, employer responsibilities, and how to file a complaint. The OSHA Outreach Training Program is not intended to focus on standards or compliance regulations.

OSHA 62

OSHA Safety Guidelines Schedule 62

Safety Services Company

FEBRUARY 23, 2017

OSHA updated “1910 Subpart D – Walking-Working Surfaces” (also known for covering “slip, trip, and fall” hazards) and added personal fall protection system requirements to “1910 Subpart I – Personal Protective Equipment.”. Fixed Ladders: These are permanently attached to a structure, building, or equipment.

OSHA 48

OSHA Safety Injury Inspections 48

Safety Services Company

FEBRUARY 23, 2017

OSHA updated “1910 Subpart D – Walking-Working Surfaces” (also known for covering “slip, trip, and fall” hazards) and added personal fall protection system requirements to “1910 Subpart I – Personal Protective Equipment.”. Fixed Ladders: These are permanently attached to a structure, building, or equipment.

OSHA 48

OSHA Injury Safety Inspections 48

Autodesk Construction Cloud

OCTOBER 23, 2023

Equip your recruitment teams skills for diverse hiring Bringing in diverse talent starts with understanding the importance and benefits of a varied workforce. Applicants will naturally seek employers that prioritize their well-being. Consider this data from the US Bureau of Labor Statistics : 10.9%

AGC 105

AGC Construction Safety Autodesk 105

Autodesk Construction Cloud

AUGUST 4, 2022

Because construction would be more programmable and automated, worker injuries and fatalities would likely decrease if 3D printing was incorporated onto the jobsite. Regulations. One drawback that might not immediately come to mind is the regulation of 3D printing. Reduce human error. High costs. Quality control.

Construction 105

Construction Concrete Innovation Regulation 105

Safety Services Company

FEBRUARY 23, 2018

When thinking about safety you should consider: Are you using the appropriate personal protective equipment for the job? Is there a plan in place on how to avoid injury, and are there first aid procedures in case of injury. Make sure you know the regulations that apply to your work environment and how to comply with them.

Safety 48

Safety Accidents Equipment OSHA 48

Safety Services Company

OCTOBER 23, 2013

For the second year in a row, the construction fall protection regulation, 1926.501, topped OSHA’s list of violations. Take the time to read the regulation summary below, then check to make sure your worksites comply with every part of it. Select and provide required personal protective equipment to employees.

OSHA 55

OSHA Safety Regulation Employment 55

Safety Services Company

MARCH 23, 2018

A new employee is more likely to get hurt in the first year of employment, usually within the first few weeks of starting a new job. During the first day on the job, new employees are overloaded with information about company rules, regulations and procedures. It is equally important to emphasize safety and health. OSHA 300 & 301.

Safety 48

Safety Injury OSHA Accidents 48

Safety Services Company

OCTOBER 23, 2013

For the second year in a row, the construction fall protection regulation, 1926.501, topped OSHA’s list of violations. Take the time to read the regulation summary below, then check to make sure your worksites comply with every part of it. Select and provide required personal protective equipment to employees.

OSHA 48

OSHA Safety Employment Regulation 48

Pro Builder

SEPTEMBER 28, 2020

As a result of a reduced workforce, there is an increased risk that construction workers will be tasked with completing projects without the necessary support, with high potential for injury. Implementing New Health and Safety Regulations. The solution is for managers to implement new health and safety regulations for their teams.

Safety 105

Safety Schedule Site Management 105

Safety Services Company

SEPTEMBER 7, 2012

Interim Fall Protection Compliance Guidelines for Residential Construction, STD 03-00-001), to do the following: Allow an additional good faith reduction in penalties of up to 10% for employers engaged in residential construction. OSHA put these temporary enforcement measures in place Sept. 22, 2011 with an expiration date of March 15, 2012.

OSHA 61

OSHA Residential Guidelines Safety 61

Safety Services Company

SEPTEMBER 18, 2017

With cooler temperatures setting in and winter proper right around the corner, workers around the country are facing a uniquely seasonal variety of injuries known as “cold stress.” Age (your body does not regulate temperature as efficiently as you get older). Poor or ineffective clothing and personal protective equipment.

Injury 48

Injury Schedule Regulation Employment 48

Digger Blog

MARCH 2, 2013

Ammann Equipment is displaying an extensive line up of machines from its range of Ammann compaction equipment and pavers, Yanmar mini excavators, machine attachments and Cormidi tracked dumpers. Across the European Union Stage IIIB emissions regulations are soon to take effect for engines above 37kW. litre and four-cylinder 2.5

Equipment 107

Equipment Safety Engineering Modeling 107

Safety Services Company

DECEMBER 13, 2012

Interim Fall Protection Compliance Guidelines for Residential Construction, STD 03-00-001), to do the following: Allow an additional good faith reduction in penalties of up to 10% for employers engaged in residential construction. OSHA put these temporary enforcement measures in place Sept. 22, 2011 with an expiration date of March 15, 2012.

OSHA 48

OSHA Residential Guidelines Safety 48