Natural Building

OCTOBER 23, 2011

Kelly has lived in an earthbag/papercrete home that he built and consults about sustainable building design. Puerto Vallarta Model Home. October 23, 2011. Earth USA 2011. View my complete profile. Building Affordable Earth-Sheltered Homes. A Solar Buyer’s Guide. Living Homes: a Review. Earthbag Building Guide.

Architecture 40

Architecture Sustainability Green Conference 40

DebunkTheBIM

MAY 10, 2012

I consider myself to be a model-based construction information practitioner (shortened to a ‘BIM- meddler’) rather than an ‘expert’ or even ‘specialist’ Thursday, May 10, 2012. They are turning up en masse on consultants’ drawings these days! The weak link in AEC projects: consultants are lar.

Drawings 54

Drawings Consulting Modeling BIM 54

Building Information Management

JULY 16, 2012

July 16th, 2012 – NIBS Report - National Institute of Building Sciences Consultative Council . Per the NIBS Consultative Council there are four areas where our industry needs to focus highlights four in order to improve buildings and infrastructure. Defining High-Performance and Common Metrics. Sustainability.

BIM 81

BIM Life Cycle Consulting Sustainability 81

Revit OpEd

MAY 10, 2012

Autodesk Labs posted an application that was developed by Autodesk Consulting. Note that it uses a file formatted as ACCSXML (Autodesk Consulting Coordinate System eXtensible Markup Language). ► 2011. ► December 2011. (19). ► November 2011. (21). ► October 2011. (16). ► 2010.

Revit 80

Revit BIM Autodesk Consulting 80

DebunkTheBIM

JULY 26, 2012

I consider myself to be a model-based construction information practitioner (shortened to a ‘BIM- meddler’) rather than an ‘expert’ or even ‘specialist’ Thursday, July 26, 2012. As in, not just view, or re-purpose information provided by design consultants. ► 2011. an unnecessarily long.

Modeling 50

Modeling Consulting BIM Sketchup 50

Revit OpEd

SEPTEMBER 5, 2012

I see this as being great for consultants. My current project has a range of consultants, lighting designers, acousticians, theater planners, landscape, civil, etc. who currently are not "in the model", they certainly could benefit from better access to the model, and LT could potentially do that. ► 2011.

Revit 74

Revit Autodesk Consulting BIM 74

Revit OpEd

APRIL 25, 2012

Rooms and areas can be deleted in model views like floor plans and ceiling plans. Revit warns us that they have been deleted from the model but they are still listed in schedules. Wall Floor Interaction and Linked Models. ► 2011. ► December 2011. (19). ► November 2011. (21). ► 2010.

Revit 56

Revit Schedule Autodesk Modeling 56

Revit OpEd

MAY 9, 2012

Sure we benefit from the modelling effort in architecture and structure but we can still benefit from the effort without them. Why assume that there is no value in creating a model of the MEP scope of work even if the architect doesnt use Revit? Modeling a project reveals more than doing one in 2D. ► 2011.

Revit 61

Revit Autodesk Architecture Modeling 61

Revit OpEd

SEPTEMBER 3, 2012

It is an awesome way to resolve little matters when people are all out of the model. For 2013: [link] The procedure that Steve is describing has become more prevalent in 2012 and beyond due to tagging through linked models. ► 2011. ► December 2011. (19). ► November 2011. (21). ► July 2011.

Revit 72

Revit Autodesk Conference Architecture 72

Revit OpEd

APRIL 4, 2012

I can see why, polished presentation as well as high quality modeling work. Wall Floor Interaction and Linked Models. ► 2011. ► December 2011. (19). ► November 2011. (21). ► October 2011. (16). ► September 2011. (28). ► August 2011. (37). ► July 2011.

Revit 71

Revit BIM Equipment Autodesk 71

Revit OpEd

MAY 14, 2012

I think they left it in there to make it easy to spot terrible modellers who do not actually create their own ceiling or model correctly. ► 2011. ► December 2011. (19). ► November 2011. (21). ► October 2011. (16). ► September 2011. (28). ► August 2011. (37).

Revit 68

Revit Autodesk Conference Architecture 68

Revit OpEd

JULY 19, 2012

These adjustments change the 3D model, not just the 2D plan-view. ► 2011. ► December 2011. (19). ► November 2011. (21). ► October 2011. (16). ► September 2011. (28). ► August 2011. (37). ► July 2011. (20). ► June 2011. (13). ► 2010.

Revit 72

Revit Autodesk Materials Architecture 72

Revit OpEd

SEPTEMBER 19, 2012

They recently announced that theyre offering a software solution to bring 3D as-built models of pipes and other cylindrical MEP elements directly into Revit. However, the accuracy and utility of the model is greatly enhanced by the use of custom families. ► 2011. ► December 2011. (19). ► November 2011.

Revit 56

Revit Autodesk Software Software 56

Revit OpEd

APRIL 4, 2012

Wall Floor Interaction and Linked Models. ► 2011. ► December 2011. (19). ► November 2011. (21). ► October 2011. (16). ► September 2011. (28). ► August 2011. (37). ► July 2011. (20). ► June 2011. (13). ► May 2011. (26).

Revit 82

Revit Autodesk Products Architecture 82

Revit OpEd

APRIL 10, 2012

Model Groups = Finish and Cancel. Wall Floor Interaction and Linked Models. ► 2011. ► December 2011. (19). ► November 2011. (21). ► October 2011. (16). ► September 2011. (28). ► August 2011. (37). ► July 2011. (20). ► June 2011. (13).

Revit 53

Revit Autodesk Architecture Consulting 53

Revit OpEd

APRIL 12, 2012

Autodesk Revit Model Review 2013. Wall Floor Interaction and Linked Models. ► 2011. ► December 2011. (19). ► November 2011. (21). ► October 2011. (16). ► September 2011. (28). ► August 2011. (37). ► July 2011. (20). ► June 2011. (13).

Revit 56

Revit Autodesk Architecture Consulting 56

Revit OpEd

JUNE 13, 2012

These divisions, while relevant to the architectural model, are ruining the possibilities of creating gbXML files without extensive work on the part of the engineer to remove the room separation lines, and then repair the damage done to the room names and numbers. Joe - in the examples he offered it isn't "poor" modeling.

Revit 76

Revit Zoning Autodesk Modeling 76

Building Information Management

JULY 16, 2012

July 16th, 2012 – NIBS Report - National Institute of Building Sciences Consultative Council . Per the NIBS Consultative Council there are four areas where our industry needs to focus highlights four in order to improve buildings and infrastructure. Defining High-Performance and Common Metrics. Sustainability.

BIM 40

BIM Life Cycle Consulting Sustainability 40

Revit OpEd

APRIL 14, 2012

Wall Floor Interaction and Linked Models. ► 2011. ► December 2011. (19). ► November 2011. (21). ► October 2011. (16). ► September 2011. (28). ► August 2011. (37). ► July 2011. (20). ► June 2011. (13). ► May 2011. (26).

Revit 74

Revit Autodesk Architecture Consulting 74

Revit OpEd

APRIL 3, 2012

The opening families are still assigned to the category Generic Model. Wall Floor Interaction and Linked Models. ► 2011. ► December 2011. (19). ► November 2011. (21). ► October 2011. (16). ► September 2011. (28). ► August 2011. (37). ► July 2011. (20).

Revit 53

Revit Autodesk Architecture Consulting 53

Revit OpEd

SEPTEMBER 6, 2012

As I wrote in my reply there, RTN is sleight of hand while RPN is really altering the entire model and related views to change orientation. ► 2011. ► December 2011. (19). ► November 2011. (21). ► October 2011. (16). ► September 2011. (28). ► August 2011. (37).

Revit 60

Revit Autodesk Conference Site 60

Pro Builder

JUNE 3, 2020

They also account for every one of the builders that have earned a National Housing Quality (NHQ) Award for operational excellence over the last decade, and make up seven of our annual Builder of the Year honorees since 2011. Model Middle Builders. 2020 Housing Giants Ranked. Previous: 2019 Housing Giants Report. . Then there’s No.

Housing 86

Housing Inventory Houston Modeling 86

Revit OpEd

APRIL 13, 2012

Wall Floor Interaction and Linked Models. ► 2011. ► December 2011. (19). ► November 2011. (21). ► October 2011. (16). ► September 2011. (28). ► August 2011. (37). ► July 2011. (20). ► June 2011. (13). ► May 2011. (26).

Revit 56

Revit Autodesk Architecture Site 56

Revit OpEd

APRIL 11, 2012

Wall Floor Interaction and Linked Models. ► 2011. ► December 2011. (19). ► November 2011. (21). ► October 2011. (16). ► September 2011. (28). ► August 2011. (37). ► July 2011. (20). ► June 2011. (13). ► May 2011. (26).

Revit 56

Revit Autodesk Architecture Consulting 56

Revit OpEd

APRIL 3, 2012

Wall Floor Interaction and Linked Models. ► 2011. ► December 2011. (19). ► November 2011. (21). ► October 2011. (16). ► September 2011. (28). ► August 2011. (37). ► July 2011. (20). ► June 2011. (13). ► May 2011. (26).

Revit 56

Revit Conference Autodesk Architecture 56

Revit OpEd

AUGUST 26, 2012

Autodesk Vasari Beta 1 is a slimmed down version of Revit 2013 focusing on conceptual modeling and early analysis. Detailed BIM modeling tools have been removed. I have read that in Vasari, one can edit a model in perspective view. ► 2011. ► December 2011. (19). ► November 2011. (21).

Revit 56

Revit Autodesk Products Architecture 56

Revit OpEd

APRIL 6, 2012

Wall Floor Interaction and Linked Models. ► 2011. ► December 2011. (19). ► November 2011. (21). ► October 2011. (16). ► September 2011. (28). ► August 2011. (37). ► July 2011. (20). ► June 2011. (13). ► May 2011. (26).

Revit 74

Revit Autodesk Architecture Consulting 74

DebunkTheBIM

AUGUST 23, 2013

A case, which should be of interest to anyone that has a stake in construction – project owners, public or private funders, consultants and contractors of every sort, anywhere in the world. billion (in September 2011 prices) 14 contracts have already been awarded to individual contractors or joint ventures. BIM could be in the mix.

BIM 48

BIM Metro Contract Modeling 48

Revit OpEd

JULY 20, 2012

Improves section creation within a project with linked model. Improves stability when enabling “Show Analytical Model Categories in this View” when the Warning dialog is open. Improves creation consistency with Physical Wall when coping an Analytical Model Wall. ► 2011. ► December 2011. (19).

Revit 61

Revit Autodesk Architecture Products 61

DebunkTheBIM

OCTOBER 15, 2013

No, it was not really a surprise, that… "The HKIBIM Conference Working Group regrets to inform you that your paper identified below will not be included in the program of the HKIBIM Hong Kong BIM Conference 2011 on 25-Nov-2011. What was I thinking, Forensic BIM? Not a speaker, sorry, but a building.

Conference 50

Conference BIM Housing Architecture 50

DebunkTheBIM

MAY 31, 2012

I consider myself to be a model-based construction information practitioner (shortened to a ‘BIM- meddler’) rather than an ‘expert’ or even ‘specialist’ Thursday, May 31, 2012. The weak link in AEC projects: consultants are lar. ► 2011. Should have 3D computer knowledge. ► April.

BIM 58

BIM Consulting Deals Software 58

Digger Blog

FEBRUARY 24, 2013

Needless to say from that time forward Austin was hooked on diggers, and birthdays and Christmas’s became perfect opportunities to receive model diggers and other JCB digger related items. This 2013 model is aimed at machines from 28 to 36 tonnes in weight. Austin’s father had a customer called P.P.

Austin 124

Austin Modeling Fabrication Travel 124

Revit OpEd

MARCH 30, 2012

Its a heart modeled in Revit. ► 2011. ► December 2011. (19). ► November 2011. (21). ► October 2011. (16). ► September 2011. (28). ► August 2011. (37). ► July 2011. (20). ► June 2011. (13). ► May 2011. (26). I Love BIM" awwww.

Revit 58

Revit BIM Autodesk Conference 58

Autodesk Construction Cloud

NOVEMBER 1, 2022

She provided metrics and reporting to owners, team leaders, trade partners, and design consultants. Her position includes laser scanning and processing, MEP coordination, building modeling, 3D site logistics, 4D schedules, and virtual walkthrough plans. .

Construction 122

Construction BIM Management Project Management 122

CK Power

JUNE 25, 2021

The initial Tier 4 Interim period from 2011 to 2012 enabled a gradual phase in before the Tier 4 Final regulations were placed on manufacturers beginning in 2013. Our engineers consulted with manufacturers to understand the best way to integrate new emission controls onto their engines. Tier 4 Final: DEF, SCR and engine replacement.

Regulation 52

Regulation Engineering Equipment Modeling 52

DebunkTheBIM

NOVEMBER 10, 2011

I consider myself to be a model-based construction information practitioner (shortened to a ‘BIM- meddler’) rather than an ‘expert’ or even ‘specialist’ Thursday, November 10, 2011. unconvinced of the benefits); Consultants aren’t playing ball and don’t use open BIM. ▼ 2011.

BIM 63

BIM Modeling AutoCAD CAD 63

Building Information Management

JUNE 19, 2013

Requires IFC BIM in its projects and intends to have integrated model-based operation in future. Recommended 2D symbols of building elements for use in building information modelling. Work with key agencies to prepare consultants and contractors who undertake the public sector projects to be BIM ready. Senate Properties.

BIM 70

BIM Architecture Procurement Engineering 70