Construction Dive

JANUARY 29, 2014

By Bruce Jervis The “Permits and Responsibilities” clause is found in every federal construction contract. It requires contractors, at no additional expense to the government, to comply with any federal, state, or municipal law, code, or regulation applicable to the performance of the work.

Regulation 52

Regulation Contractors New Hampshire OSHA 52

Safety Services Company

OCTOBER 23, 2013

For the second year in a row, the construction fall protection regulation, 1926.501, topped OSHA’s list of violations. Take the time to read the regulation summary below, then check to make sure your worksites comply with every part of it. On roofs 50 feet or less wide, a safety monitoring system alone is permitted.

OSHA 55

OSHA Safety Regulation Employment 55

Safety Services Company

OCTOBER 9, 2014

OSHA recently announced that it would extend deadline for implementing its crane operator certification rule requiring employers to ensure that crane operators are certified until November 10, 2017. OSHA is also extending the employers’ duty to ensure that crane operators are competent to operate a crane safely for the same period.

Certification 67

Certification OSHA Employment Organization 67

Safety Services Company

MARCH 1, 2016

OSHA has a full slate of objectives coming up for 2016 and beyond. OSHA is looking at rules on infectious diseases based on NIOSH guidelines that will directly affect hospitals, but could also impact any subcontractor working at a hospital. based on the Construction Fall Protection regulation with a four foot threshold is impending.

OSHA 48

OSHA Regulation Safety Guidelines 48

Safety Services Company

APRIL 14, 2014

OSHA forklift regulations explain the training required in 1910.178(l). The employer shall permit only those employees qualified by training or experience to operate equipment or machinery. The employer shall permit only those employees qualified by training or experience to operate equipment or machinery.

Equipment 59

Equipment Safety OSHA Regulation 59

Safety Services Company

OCTOBER 23, 2013

For the second year in a row, the construction fall protection regulation, 1926.501, topped OSHA’s list of violations. Take the time to read the regulation summary below, then check to make sure your worksites comply with every part of it. On roofs 50 feet or less wide, a safety monitoring system alone is permitted.

OSHA 48

OSHA Safety Employment Regulation 48

Safety Services Company

MARCH 1, 2016

OSHA has a full slate of objectives coming up for 2016 and beyond. OSHA is looking at rules on infectious diseases based on NIOSH guidelines that will directly affect hospitals, but could also impact any subcontractor working at a hospital. based on the Construction Fall Protection regulation with a four foot threshold is impending.

OSHA 48

OSHA Regulation Safety Guidelines 48

Work Gearz

FEBRUARY 17, 2021

Wearing a hard hat can be hot, or cold, and construction workers often ask can you wear a hat under a hard hat. It’s important to select hat worn under the hard hat carefully, and that safety regulations must be followed, at all times. Is it permitted by OSHA to wear a Hat under hard hat. In conclusion:-.

Safety 52

Safety OSHA Regulation Products 52

NH Construction Law

JULY 12, 2022

When New Hampshire last updated its building codes in 2019 (from the 2009 versions to the 2015 versions) I blogged ( #80 ) on the ambiguities in the transition rules for construction projects straddling the effective date, an issue that was left to the municipalities to deal with. C & R Construction Co. , Target Corporation , No.

New Hampshire 40

New Hampshire Permits Residential Safety 40

Work Gearz

JANUARY 4, 2022

Well isn’t it amazing to watch our favorite Hollywood hunks on screen, donning tank tops and being the sexiest construction workers. Is it ok to wear tank tops to the construction site?? Can construction workers wear tank tops? . Why can’t construction workers wear tank tops? . But is that gonna remain a mere fantasy?

Fabrication 52

Fabrication Construction Injury Products 52

Safety Services Company

FEBRUARY 6, 2014

When it comes to OSHA’s fall protection requirements in steel erection, the final word can be found in the code at 1926.760. But good luck deciphering all the jargon with references to appendixes and other regulations. where the general construction threshold 6 ft.? be protected by fall protection. or two stories.

OSHA 48

OSHA Regulation Safety Zoning 48

Safety Services Company

FEBRUARY 6, 2014

When it comes to OSHA’s fall protection requirements in steel erection, the final word can be found in the code at 1926.760. But good luck deciphering all the jargon with references to appendixes and other regulations. where the general construction threshold 6 ft.? be protected by fall protection. or two stories.

OSHA 48

OSHA Regulation Safety Zoning 48

Safety Services Company

MARCH 1, 2018

Everyone working at a jobsite with a confined space needs to be able to recognize and have a fundamental understanding of confined spaces and permit required confined spaces (PRCS). This is necessary to know how the signs and posted permits may be relevant to help you or another person avoid danger. Permit Required Confined Spaces.

Permits 48

Permits Safety Risk Regulation 48

Work Gearz

MAY 5, 2021

These professionals included construction workers, carpenters, factory machinists and even a lawn care specialist. As a professional tradesman, you may find yourself working in industrial settings, at construction sites , or with heavy machinery or power tools that make quite a bit of noise, noise that is very loud. All About Noise.

Safety 52

Safety Products OSHA Permits 52

Work Gearz

JUNE 5, 2021

Full Brim Hard Hat Construction OSHA Approved Hardhats. Made of premium ABS, this construction helmet is stronger than the standard HDPE yet lighter and offers superb coverage. Fully compliant with OSHA, ANSI Z89.1-2014, This cap also permits accessories such as earmuffs or other customized preferences.

Products 52

Products Safety Site Materials 52

Safety Services Company

DECEMBER 18, 2013

General Industry Regulation 1910.147, The Control of Hazardous Energy – better known as Lockout/Tagout (LOTO) – was the seventh most violated standard in 2013 with 3,254, more than twice as many as in 2012 (1,572). A Work Authorization Permit is a way to comply with the LOTO provisions if included in the written procedures.

OSHA 48

OSHA Permits Equipment Inspections 48

Safety Services Company

DECEMBER 18, 2013

General Industry Regulation 1910.147, The Control of Hazardous Energy – better known as Lockout/Tagout (LOTO) – was the seventh most violated standard in 2013 with 3,254, more than twice as many as in 2012 (1,572). A Work Authorization Permit is a way to comply with the LOTO provisions if included in the written procedures.

OSHA 48

OSHA Permits Equipment Inspections 48

Work Gearz

MARCH 3, 2021

This essential piece of protective gear can help professionals avoid head wounds or falling debris at construction sites. Constructed from ABS material — Strong, yet ultra-light for seemingly weightless protection. This is a convincing choice for professional electricians who work at construction sites. Pyramex Ridgeline.

Electrical 52

Electrical Safety Products Site 52

Safety Services Company

NOVEMBER 20, 2013

The non-descript General Industry regulation 1910.305 which governs wiring methods, components and equipment for general use was responsible for 3,452 violations in 2013, making it the regulation that is the fifth most likely to trip up employers for citations in the United States. Temporary Wiring. Open Wiring on Insulators.

Electrical 54

Electrical OSHA Regulation Equipment 54

Safety Services Company

NOVEMBER 20, 2013

The non-descript General Industry regulation 1910.305 which governs wiring methods, components and equipment for general use was responsible for 3,452 violations in 2013, making it the regulation that is the fifth most likely to trip up employers for citations in the United States. Temporary Wiring. Open Wiring on Insulators.

Electrical 49

Electrical OSHA Regulation Equipment 49

Job Order Contracting

SEPTEMBER 12, 2018

via Four BT, LLC – 4BT enables owners to consistently deliver quality facilities repair, renovation, and minor new construction projects on-demand, on-time, and on-budget. All fall protection equipment is required by OSHA to be checked prior to each use. OSHA 1910.66, CALOSHA, AISC, AWS and local code requirements.

Inspections 100

Inspections Equipment Electrical Safety 100

Work Gearz

MARCH 8, 2021

Its safety standards and phenolic design make it compatible with many professional situations and is not limited to construction. Fully compliant with OSHA, ANSI Z89.1-2014, The accessory slots on the hat permit customized accessories for eyes, face, and hearing protection. INNOVATIVE CONSTRUCTION HAT. 2014, Cert.

Products 52

Products Safety Electrical Site 52

Buisness Facilities Contributed Content

APRIL 15, 2014

It allows for the construction of roads, bridges, etc. Industrial Revenue Bonds: May be used as long-term financing of up to 100% of a project for: Acquisition of land, buildings, site preparation and improvements; Construction of buildings; Acquisition and installation of furnishings, fixtures and equipment; Capitalizable soft costs (e.g.,

Income 108

Income Finance Zoning Employment 108

Safety Services Company

MAY 29, 2013

This article was written by Safety Consultants with Safety Services Company , we provide Construction, Manufacturing, and General Industry Safety Programs to over 100,000 clients across the United States and Canada. Section 15, Regulatory information covers: Safety, health and environmental regulations for the specific product.

Safety 76

Safety Transportation Employment Products 76

Safety Services Company

MAY 29, 2013

This article was written by Safety Consultants with Safety Services Company , we provide Construction, Manufacturing, and General Industry Safety Programs to over 100,000 clients across the United States and Canada. Section 15, Regulatory information covers: Safety, health and environmental regulations for the specific product.

Safety 60

Safety Transportation Employment Products 60

Building Information Management

JUNE 22, 2012

o Background o Regulations and Requirements Implementation. o Regulations, Goals and Best Practices o Wa ter Audit. Demonstrate knowledge of laws, regulations and Executive Orders that pertain to energy management, status of compliance and existing energy management plans. o Regulations pertaining to ESPCs.

Management 45

Management Contract Sustainability Life Cycle 45