Construction Marketing

DECEMBER 27, 2021

As a contractor, you likely know that your business is always at risk. Between the potential for accidents and injuries on the job site and the risk of lawsuits, it’s important to have insurance to protect yourself from financial losses, but what kind of insurance do you need? Builders Risk Insurance.

Insurance 156

Insurance Contractors Accidents Liability 156

FDR Safety

SEPTEMBER 27, 2013

If you manage for risk, you also manage for compliance. However, if you manage for compliance, you may overlook risk and hazards that result in serious or fatal injuries. Thankfully, the groundwork to manage risk within GM and our joint process had been laid. Whether safety, business risk, insured risk, market risk, etc.,

Risk 120

Risk Safety Management OSHA 120

FDR Safety

DECEMBER 11, 2020

Lastly, this blog does not intend to be the end all, but is designed to mentor by overviewing basic safety program organization and key concepts. Table 2 provides one example for determining the risk for each hazard. It is critical to remember the primary purpose of using Table 2 is to drive consistency between risk assessments.

Risk 156

Risk Feasibility Safety Injury 156

Pro Builder

MAY 21, 2021

Demand for Aging-in-Place Design Poised to Grow. The growing population of older adults comes with an increased importance on universal and aging-in-place home design principles. The vast majority of people want to stay in their homes as they age, and most homes in this country aren’t designed to allow that to happen.”.

Design 98

Design New York Remodeling Injury 98

Safety Services Company

JANUARY 21, 2018

Repetitive strain injuries (RSI) are those which affect nerves, joints, tendons, tendon sheathes, and muscles. Estimates suggest that repetitive motion injuries cost United States businesses over $20 billion just in workers’ compensation alone. If so, how can you alter the workstation or equipment design to accommodate the worker?

Injury 48

Injury Safety Equipment Inspections 48

Construction Marketing

JANUARY 11, 2024

They allow workers to move and transport incredibly heavy, bulky and awkward loads without the risk of injury. They are used for lifting loads directly, and their capacity varies based on their design and size. Pallet lifter – Pallet lifters are designed to lift and move palletized loads.

Equipment 178

Equipment Overhead Transportation Materials 178

BD+C

APRIL 13, 2023

Melanie Baumhover, AIA, LEED AP, BWBR, and Melanie Gullixson, RN, BSN, Allina Health Healthcare Facilities Hospital Design Trends Designers Designers / Specifiers / Landscape Architects Architects Building Owners We’re in the middle of a mental health care crisis. And it’s not only patients who are at risk in this environment.

Design 52

Design Risk Modeling Equipment 52

Lets Build

NOVEMBER 5, 2020

Being able to define the major sources of risk in your projects can eventually pave the way for faster and cheaper delivery without having to compromise quality. That being said, coming up with an effective risk management framework across different projects is possible. How we could define risk in a construction project.

Risk 60

Risk Management Construction Claims 60

Construction Business Owner

FEBRUARY 2, 2023

R&D is the Cornerstone of Product Innovation Superior Glove’s state-of-the-art R&D facility is where new glove concepts and custom design solutions are materialized to make the gloves more comfortable without compromising on essential hazard protection. The company manufactures engineered yarn in its facilities in Canada and Honduras.

Innovation 296

Innovation Products Safety Housing 296

FDR Safety

NOVEMBER 16, 2020

Lastly, this blog does not intend to be the end all, but is designed to mentor by overviewing basic safety program organization and key concepts. This pandemic has brought to the forefront the challenges of risk assessment – the process of identifying hazards and determining consequences. The Changes That Just Occurred.

Safety 266

Safety Risk Deals Inventory 266

Autodesk Construction Cloud

DECEMBER 31, 2021

And with good reason: the right insights can improve everything from project cost and timeline accuracy to reducing the risk of lawsuits and disputes, and even winning more business. Or implementing new safety training to mitigate worker injury risk You can then use that knowledge to anticipate and better manage risk for future jobs.

Risk 52

Risk Management Construction Autodesk 52

Lets Build

MARCH 17, 2023

Gain real-time visibility While the benefits of construction analytics are more noticeable during the building process, they can also boost productivity in the design stage. Mitigate safety risks Construction collaboration is crucial for better safety planning, which can save your company in the long run.

Construction 147

Construction Risk Site Safety 147

Work Gearz

APRIL 28, 2022

The defining characteristic of work boots with external metatarsal guards is the fact that they are designed with a kind of external shell. This shell will cover the boot work upper from the safety toe cap instep, covering work boot laces which is a plus if laces are at risk of getting caught on something. Internal Metatarsal Guards.

Injury 52

Injury Risk Safety Employment 52

Safety Services Company

DECEMBER 12, 2023

of budgets are spent on injury while only 2.6% Failure to invest in training puts your teams and organization at risk of injury and loss. How to Sufficiently Train Employees Investing more in safety training doesn’t only ensure prequalification but has sizable impacts on lowering the risk of onsite injury.

Contractors 59

Contractors Safety Certification Injury 59

Safety Services Company

FEBRUARY 24, 2014

Estimates suggest that repetitive motion injuries cost United States businesses over $20 billion just in workers’ compensation alone. Business costs aside, Repetitive Motion Injuries (RMIs) are a heavy burden to the individual as well. Business costs aside, Repetitive Motion Injuries (RMIs) are a heavy burden to the individual as well.

Injury 48

Injury Equipment Safety Inspections 48

Wolgast Corporation

JULY 6, 2022

Members include architects, risk managers, parking specialists, lawyers, and perimeter safety professionals. They have collected data from years 2014-2021 and have determined that there is an average of 60 vehicle/building impacts daily, 500 deaths annually, and 4,000 injuries each year.

Insurance 118

Insurance Claims Safety Michigan 118

Work Gearz

DECEMBER 8, 2022

A Risk of Foot Injury. If you’re at risk to walk over nails, glass or metal shards, and anything sharp. The Risk of Slipping and Falling. Slippery surfaces are one of the foremost reasons for injuries at construction sites. Whenever water or oil is present, there’s a risk of slipping and falling.

Construction 52

Construction Safety Injury Electrical 52

Construction Marketing

JUNE 14, 2021

3) Risk Of Falling Materials. One of the hazards that must be carefully managed is the risk of falling materials. If there’s a risk of large items dropping from above, install an anti-falling system for protection against such hazards. Failing to do so is one of the many workplace injuries that can put you out of business.

Overhead 156

Overhead Safety Accidents Injury 156

Construction Marketing

APRIL 5, 2023

Injuries and, in severe cases, permanent disabilities or deaths can happen if there are very few preventative safety measures in place. Individuals will know when to stay away from the construction site at risk of getting hurt. Watch for Forklifts – must be near areas where heavy machinery is in operation.

Safety 215

Safety Construction Accidents Security 215

FDR Safety

JULY 16, 2018

OSHA sees great opportunity because your industry does realize finger injuries and amputations that are not realized in other companies where operators have automation and/or engineered safeguards to protect the point of operation. Many, if not most safety courses, are designed for administrative issues of compliance.

OSHA 149

OSHA Feasibility Fabrication Risk 149

Safety Services Company

AUGUST 21, 2020

Insurance companies use the number to assess the cost of injuries and future risks. When this happens, your insurer raises your insurance premium to mitigate risk. If your industry shows a higher rate for injuries, it is reasonable to conclude that the rate will be higher in the future as well. Calculating EMR.

Insurance 62

Insurance Compensation Injury Claims 62

FDR Safety

OCTOBER 29, 2020

Lastly, this blog does not intend to be the end all, but is designed to mentor by overviewing basic safety program organization and key concepts. . You are told to reduce costs and that “we are only going to comply with safety regulations and do nothing else – none of that risk-based crap. The Changes That Just Occurred.

Safety 120

Safety Foundation Regulation Risk 120

Work Gearz

JULY 22, 2021

This makes the risk of falling more prominent due to the possibility of a slick environment. A lot of slip-resistant shoes have memory foam are installed that are designed for labor such as truck drivers perform. A shoe that is low on the ankle and designed to take a lot of impacts is the better option in this case.

Injury 52

Injury Safety Risk Environment 52

Construction Marketing

DECEMBER 19, 2022

There is no denying that many new commercial projects incorporate concrete structures into their designs. Due to this characteristic, builders are able to design structures of various sizes and styles. Some of these are listed below to help you make the best decision for your property: Pros. It Saves Time And Money.

Commercial 156

Commercial Concrete Materials Regulation 156

FDR Safety

JUNE 23, 2014

The article went on to offer the following ideas: “How can these risks be minimised? that prevents the machine from starting while open will remove or significantly reduce most lathe safety risks…. Innovations in safeguarding can often be incorporated when designing and building new machines. I agree – partially.

Feasibility 136

Feasibility Risk Safety IDEA 136

Green Building Law Update

JUNE 19, 2016

TSCA was enacted in 1976 to protect the environment and the public’s health against risks posed by chemicals in materials in commerce. The first step will consist of an EPA risk evaluation and a second step for risk management. Risk evaluations are to be conducted on each chemical EPA designates as a high-priority substance.

Risk 149

Risk Regulation Materials United States 149

BD+C

APRIL 25, 2024

When designing aquatic spaces , it is integral to collaborate with the community and analyze the project requirements to execute the common goal. These factors are not only integral to creating aquatic spaces but are also important to solve at the beginning of the project to prevent issues later in the design process.

AIA 52

AIA Environment Injury Budgeting 52

Autodesk Construction Cloud

JULY 14, 2022

Construction safety management software helps support your safety programs to prevent hazards and other risks from turning into dangerous situations at your construction site. It works by helping foremen or others record safety meetings, keep track of attendance, and identify the root causes of safety risks. .

Software 98

Software Software Safety Management 98

Pro Builder

JULY 28, 2022

Know the risks and the corrective measures you should take on your jobsites to ensure crew safety and prevent excavation fatalities. The risk of injury or death,” she says, “is just too high.”. That individual must also be given the authority to deploy corrective measures to remove those risks. . Thu, 07/28/2022 - 12:11.

Safety 98

Safety OSHA Construction Inspections 98

Work Gearz

JANUARY 15, 2022

One of the most common cause of workplace injuries is rolling or falling objects. So it’s always best to gear up and wear all the necessary personal protection equipment to avoid injuries from such unexpected accidents. What are metatarsal guards and what do they do? . What are metatarsal guards? .

Injury 52

Injury Employment OSHA Safety 52

Autodesk Construction Cloud

MAY 30, 2023

Serious project design errors Unfortunately, design deficiencies are too common. These issues can be mitigated with software that ensures everyone is on the same page, reducing the risk of errors or incomplete designs. Online access to designs and scenarios allows for greater communication from remote locations.

Change Orders 52

Change Orders Construction Budgeting Budget 52

Construction Lawyer

MAY 13, 2009

The cases with which he has been involved are varied and wide-ranging and include personal injury, breach of contract, criminal defense, commercial disputes, and consumer fraud. In other words, you use the stuff we post here at your own risk. Risks in LEED design. Unlimited liability for designers and contractors.

Risk 40

Risk Design Illinois AIA 40

Levelset

SEPTEMBER 2, 2022

While general liability insurance covers against claims related to injury or property damage, errors and omissions insurance protects from lawsuits related to financial loss. Errors and omissions insurance, also called professional liability insurance, is one tool that contractors can use to transfer risk away from themselves.

Insurance 52

Insurance Liability Claims Construction 52

Work Gearz

JULY 7, 2020

Construction sites pose a major threat for the workers, be it small injuries or be fatal ones. Each helmet belonging to a particular color is designed to protect your head from a particular type of injury. A helmet designed for supervisors will not be made that strong as that of a laborer.

Safety 52

Safety Injury Construction Electrical 52

Green Building Law Update

NOVEMBER 15, 2020

courts have never addressed a pandemic like SARS-CoV-2 (the current designation for what had been the Novel Coronavirus 2019). a) knows or by the exercise of reasonable care would discover the condition, and should realize that it involves an unreasonable risk of harm to such invitees, and. (b)

Liability 293

Liability Legal Claims Insurance 293

Green Building Law Update

JUNE 19, 2016

TSCA was enacted in 1976 to protect the environment and the public’s health against risks posed by chemicals in materials in commerce. The first step will consist of an EPA risk evaluation and a second step for risk management. Risk evaluations are to be conducted on each chemical EPA designates as a high-priority substance.

Risk 120

Risk Regulation Materials United States 120

Viewpoint Construction Technology

OCTOBER 23, 2018

Construction sites these days have no shortage of data: design and BIM data from the planning stages of a project, jobsite data collected by wearables, mobile devices and sensors on equipment/materials, accounting and job progress data from the office, project management data and much more. Reducing Risk and Increasing Safety.

Construction 195

Construction Software Software Cash Flow 195