Construction Specifier

JUNE 30, 2021

Selection of suitable waterproofing systems can present building project teams with a baffling array of choices. With hundreds of products to choose from, there is a formidable QUANTITY of data to evaluate to make a thorough investigation. Sometimes work must be done in confined spaces—from installation to inspection.

Los Angeles 52

Los Angeles CSI Consulting Inspections 52

Autodesk Construction Cloud

OCTOBER 5, 2022

models, documents, etc.). Additionally, the StructionSite Partner Card in the Autodesk Build dashboard allows for private & public viewing of StructionSite documentation and gives users the ability to access a StructionSite project directly within Autodesk Build. . “As

Autodesk 98

Autodesk Construction BIM Documentation 98

Autodesk Construction Cloud

SEPTEMBER 19, 2022

Sometimes, the project won’t pass inspection, or it will need to be torn down due to safety and health concerns. 2: Thoroughly Document Mistakes. If possible, make sure to document the mistake visually with photos. One small error has the potential to rapidly deteriorate other elements of a project.

Management 105

Management Construction Documentation Schedule 105

Fieldwire

AUGUST 7, 2023

Although both work towards the delivery of a final product that meets the project’s specifications and customer’s expectations, they arrive at the outcome in two very different ways. Quality Control (QC) simply refers to the process of inspecting the product to identify and correct defects. There are many more.

Construction 98

Construction Drawings Products Management 98

Autodesk Construction Cloud

FEBRUARY 3, 2023

The stark realities of complex coordination, inspection timelines, and closeout seem mercifully far away. They’re the peanut butter and jelly of stakeholders, and it’s hard to make significant changes without them present. Contract review Review all contracts, plans, and legal documents with all stakeholders.

Change Orders 52

Change Orders Documentation Schedule Budgeting 52

Levelset

NOVEMBER 10, 2022

Caught-in or between : Injuries or fatalities could occur when loose clothing gets caught in belts or pulleys while heavy equipment and foundation walls present two immovable objects that can crush or suffocate an employee. Modern tools of the trade can help productivity and reduce body strain that can lead to musculoskeletal injuries.

Safety 52

Safety Site Injury Construction 52

Autodesk Construction Cloud

NOVEMBER 25, 2022

From the presentations and discussions at ACF Conference 2022, the general sentiment felt was the pandemic became the construction industry’s catalyst to embrace onboard digital construction or accelerate their digital transformation to deal with mounting challenges. The post Digital construction in ASEAN: Where are we at?

Construction 52

Construction Conference Autodesk Industrial 52

Autodesk Construction Cloud

JUNE 30, 2022

Project photos enable your teams to document events, track progress, and even improve health and safety on the jobsite. With Autodesk Build, Autotags automatically tags your photos with the features present in the image. Team members must see to it that all construction assets are tracked, inspected, and accounted for.

Management 98

Management Autodesk Mobility Equipment 98

Autodesk Construction Cloud

JANUARY 4, 2022

But in all seriousness, with the hundreds and thousands of steps and documents needed to complete just one project, as-builts might be overlooked for their importance. As-built drawings are documents that make it easy to compare and contrast between designed and final specifications. Key Takeaways. What Is an “As-Built?” .

Drawings 52

Drawings Documentation Renovating Permits 52

Construction Marketing Ideas

OCTOBER 4, 2012

guy offered a lower price using cheaper products to get your work and get a quick downpayment so he could make a truck payment”. Some provided their documentation in handwritten scrawl on estimate forms. Proposal quality documentation can reach incredible extremes if you have the resources to invest in sophisticated systems.

Documentation 63

Documentation Bidding Estimating Contractors 63

Safety Services Company

APRIL 5, 2018

OSHA Inspections. Workplace inspections and investigations are conducted by OSHA compliance safety and health officers trained in safety and industrial hygiene. Inspections are conducted without advance notice. What does the inspection process involve? The officer will determine the route and duration of the inspection.

OSHA 48

OSHA Safety Inspections Employment 48

Constructonomics

JANUARY 21, 2014

When the safety officers inspected Ilford landlord Mohammed Saleem’s property (read full report here ) they found no ventilation, no fire alarm, no fire doors and no other safe means of exiting the property during an emergency as among the fire and general safety violations. What Does The Law Say? an extension).

Safety 148

Safety Risk Equipment Regulation 148

Fieldwire

SEPTEMBER 4, 2023

Yes, we do plan on a macro level, spending a great deal of time on documents such as the master schedule, the construction drawings, and the project specifications. Executed correctly, this type of planning can be very effective and can help to remove constraints that have a negative impact on productivity and throughput on the job.

Plans 52

Plans Concrete Injury Inspections 52

Autodesk Construction Cloud

JANUARY 16, 2022

AR technology can be used in project presentations, for progress capture, for enhanced collaboration, for better safety, and when construction training is needed. Consider the following use cases: Project presentation. Augmented can be used to track and document how projects are progressing. Progress capture.

Construction 119

Construction Visualization Modeling Mobility 119

Safety Services Company

APRIL 12, 2018

Training Documentation. Each worker involved in operating a process needs to receive and understand the training required by the initial training, the refresher training and other training documentation. Look for documentation of each inspection and test performed on process equipment. Contract-Employer Responsibility.

Safety 48

Safety Management Documentation OSHA 48

Autodesk Construction Cloud

SEPTEMBER 9, 2021

Go to the session > Speakers: Josh Cheney, Senior Manager of Strategic Alliances at Autodesk – Michael Newland, Director of Product Management, hh2 Cloud Services – Sophat Sam, Integration Solutions Engineer for Autodesk Construction Cloud. Go to the session > Speaker: Angela Yee, Senior Product Manager at Autodesk.

Autodesk 52

Autodesk Construction BIM Modeling 52

Autodesk Construction Cloud

DECEMBER 18, 2021

The right tools and documents make it easier to complete project closeout and keep customers satisfied. With the right tools, a well documented closeout process is surprisingly simple, helping to ensure that everything is complete, your customer is satisfied, and you can win repeat business. Key Takeaways.

Change Orders 52

Change Orders Documentation Equipment Risk 52

Construction Specifier

JULY 4, 2022

As for their meaning, using a substitute implies one type of material, product, or system is used in place of another, within a building assembly. Existing is the material that is currently present, original is the material used when the building was constructed.

Materials 52

Materials Employment Design AIA 52

Job Order Contracting

NOVEMBER 7, 2017

Excessively large UPBs, i.e. hundreds of thousands of line items are not generally recommend at they can negatively impact productivity, create confusion, and add to JOC Program overhead costs. a) The facilities management and/or technical staff must document the decision and plan to use a JOC. (b) Procedures. Presolicitation. (a)

Contract 100

Contract Management Negotiation Estimating 100

Lets Build

APRIL 3, 2020

The blueprints presented as negative drawings or illustrations of the original as white lines on a blue background. Blueprints or drawings or prints do not usually get the acknowledgment they deserve no matter how crucial they are in project documentation. Check out also: How to improve productivity on your construction site.

Drawings 139

Drawings Construction Plans Permits 139

Safety Services Company

FEBRUARY 12, 2014

1910.1200 Hazard Communication Standard (HCS) inspection guidance for Combustible Dust. Guidance for OSHA inspectors when inspecting manufacturers and importers to determine whether they are in compliance with the requirements for combustible dust – 1910.1200(d) – until OSHA addresses the issues in its rules. December 27, 2013.

OSHA 48

OSHA Regulation Safety Inspections 48

Job Order Contracting

SEPTEMBER 12, 2018

Inspect electrical power panel. Inspect control panel for loose connections. Inspect Bollard/Barricade coatings, decals and paint. Visually inspect for corrosion. Inspect general arrangement of door and mechanism, mountings, standards, wind locks, anchor bolts, counterbalances, weather stripping, door sweeps etc.

Inspections 100

Inspections Equipment Electrical Safety 100

Job Order Contracting

OCTOBER 25, 2017

In order to preserve the integrity of the competitive procurement process, post-award changes in unit prices can and should only be made if errors are found, or if new line items should be added. Any revised pricing or line items should be fair and reasonable and fully supported by appropriate documentation. The technical documents (i.e.,

Contract 100

Contract Contractors Conference Plans 100

Contractor Magazine

JULY 27, 2012

IAPMO President Dan Daniels and CEO GP Russ Chaney formally presented an invitation for the transition Friday, July 20, to the ASSE Board of Directors, which accepted the invitation. IAPMO and ASSE are now working together to draft a legally binding document for the transition. Introducing Axion MSR emergency equipment by Haws.

Contractors 48

Contractors Charlotte District of Columbia Los Angeles 48

Pro Builder

APRIL 1, 2021

This doesn’t mean you design to the lowest common denominator, just that you now be more deliberate with the decisions being made that can affect the construction and the final product. . The architect has a responsibility to satisfy him or herself that the work is being performed in accordance with the contract documents.

Site 52

Site Liability Design Residential 52

Viewpoint Construction Technology

JUNE 6, 2019

In construction, every project is different and presents its own set of challenges. However, by using leading-edge construction technologies that improve productivity, mitigate project risks, reduce errors and boost collaboration, contractors can streamline processes to make it easier to achieve on-time, on-budget projects.

Contractors 217

Contractors Software Software Budgeting 217

Autodesk Construction Cloud

JANUARY 4, 2022

Picture this: employees working alongside advanced robotic technology, workers incentivized and rewarded based on productivity and a collaborative team environment cutting edge software. Sheet metal workers fabricate or install products made from thin metal sheets, such as ducts used in heating and air conditioning systems.

Construction 52

Construction Industrial Engineering Statistics 52

Pro Builder

JULY 26, 2020

However, starting with the 2016 launch of our quality assurance app, Capture QA, which reports construction issues and problems that need fixing in real time, my company, LJP Construction Services , has tracked data from inspections of hundreds of construction projects of all building types nationwide. Advertisement. .

Construction 105

Construction Inspections Los Angeles Nevada 105

Revit Beginners

MARCH 23, 2007

HOKs CAD Standards describe a Data Leader as someone "responsible for the execution of the CAD strategy including, the use of BIM, the folder structure and file-naming strategy, use of templates, and documenting specific project procedures." In our office Data Managers are starting to inspect models for proper construction. at 8:42 PM.

Revit 40

Revit Management CAD BIM 40

Safety Services Company

MAY 10, 2018

Preventing work related injuries and illnesses should be given precedence over operating productivity, whenever necessary. Hazard Identification and Control: Your company should perform periodic inspections and have procedures of identifying existing or potential hazards in the workplace and eliminating or controlling them.

Safety 48

Safety Injury Inspections OSHA 48

Autodesk Construction Cloud

JANUARY 9, 2024

In 2023, the construction industry grappled with the lingering effects of supply chain disruptions, inflation, and ever-present labor shortages —a narrative that has become all too familiar. There is a significant opportunity to do risk-based inspections with this technology moving forward by providing accurate measurements and data."

Construction 137

Construction Autodesk Industrial Sustainability 137

Autodesk Construction Cloud

AUGUST 23, 2021

We asked them about the present and future utilization of PlanGrid. PlanGrid enables us to inspect and check the site, store the site conditions, and immediately share and view the necessary information with all the concerned parties. Of course, such inspection operations are routinely conducted.

Site 52

Site Inspections Housing Autodesk 52

Autodesk Construction Cloud

MARCH 23, 2022

Data not only allows for more visibility into the state of a particular project, but relevant industry statistics and facts can provide valuable information needed to make important future decisions regarding preconstruction and planning, productivity tools, risk assessment, and workforce and operational efficiency. Workforce Statistics.

Statistics 98

Statistics Industrial Autodesk Construction 98

Autodesk Construction Cloud

AUGUST 10, 2021

Picture this: there’s a group of people working on a major presentation and each person is assigned their own section or chapter. Everyone has a general idea of what the presentation is about, so team members decide to tackle their sections separately and plan to get together to combine their work.

Construction 52

Construction Risk Management Project Management 52

Building Information Management

MARCH 19, 2013

It is the aim of this paper, to present the complexity of the body of knowledge capturing the range of conflicting assumptions and understanding on the theories and practices of value management (VM) and life cycle-cost (LCC). It commences in II “epistemology of reflexivity, in this section, overview of reflexivity are presented.

Life Cycle 53

Life Cycle Management BIM Engineering 53

Autodesk Construction Cloud

DECEMBER 14, 2022

In addition to helping better manage the environmental impact of construction, modular construction methods will improve project productivity, deliver construction outputs more quickly, better manage scarce resources, and improve site safety.” – Jim Lynch, Senior Vice President & General Manager, Autodesk Construction Solutions.

Construction 111

Construction Industrial Management Innovation 111

Safety Services Company

SEPTEMBER 16, 2019

As of September 30th 2018 , the top two most frequently cited standards following OSHA worksite inspections are violations. as physical hazards in the workplace and should therefore be documented carefully to avoid. Create a folder with the most up-to-date SDS documents for all chemicals onsite. Labels should include a product.

OSHA 48

OSHA Employment Documentation Safety 48