Building Information Management

DECEMBER 2, 2012

Building information modeling (BIM) is beginning to fundamentally change the building industry in a very positive way. Led document management and retention projects which resulted in selection, implementation and ongoing support of Documentum as the corporate repository for and distribution of engineering reports and drawings.

BIM 40

BIM Conference Education CAD 40

Construction Specifier

JUNE 1, 2021

These include performance testing requirements of model building codes. The IBC is recognized as the model building code for commercial construction, which is then adopted by state and local jurisdictions. The International Building Code.

Engineering 52

Engineering Certification Safety Regulation 52

Revit OpEd

SEPTEMBER 5, 2012

who currently are not "in the model", they certainly could benefit from better access to the model, and LT could potentially do that. It's not uncommon for those type of consultants to have one person doing the drawings. ► 2004. (2). ► December 2004. (1). ► November 2004. (1).

Revit 74

Revit Autodesk Consulting BIM 74

Revit OpEd

JUNE 14, 2012

For example Ive tried to draw squares and cubes, even circles and spheres to test the extremes and predict the trigger of the error messages Ive written about before. Turned out that somehow there was a Room Tag 69,000,000 feet from the model. ► 2004. (2). ► December 2004. (1). ► November 2004. (1).

Revit 72

Revit CAD Autodesk Architecture 72

Revit OpEd

JUNE 13, 2012

These divisions, while relevant to the architectural model, are ruining the possibilities of creating gbXML files without extensive work on the part of the engineer to remove the room separation lines, and then repair the damage done to the room names and numbers. Joe - in the examples he offered it isn't "poor" modeling.

Revit 76

Revit Zoning Autodesk Modeling 76

Revit OpEd

APRIL 17, 2012

Over here on the MEP side, we will take an hour to make, say, an air handling unit per the 2-D selection drawings from the vendor, add the necessary connectors, then 'load into project' We will then save it as a stand-alone family, with a useful file name, in a server folder with the vendor's name. ► 2004. (2).

Revit 56

Revit Autodesk Modeling Conference 56

Cassell Construction Estimating

DECEMBER 14, 2008

However the current AIA Billings index is down to its lowest level since its origin fifteen years ago, and we know that if architects aren’t drawing, we surely won’t be building much in the near future. Both the new cost codes and the entire estimating database are indexed to the new 2004 MasterFormat system.

Sage 100

Sage Honolulu Hawaii Estimating 100

Buisness Facilities Contributed Content

OCTOBER 18, 2012

The winner of the new Achievement in Public-Private Partnership Award has set the standard for best practices in this dominant new economic development model. Clinton Presidential Center opened its doors in November 2004, and since opening, the Center has hosted over 300,000 visitors. In addition, the $165 million William J.

Omaha 76

Omaha Mobility Georgia Arkansas 76

Building Information Management

JULY 27, 2016

MasterFormat 2004 (and subsequent updates) is now composed of up to 8 digits (though many have expanded to 12+ digits) and 50 divisions at Level 1, “Sections” within each division, as well as four standard levels, and a user-defined fifth level. 2004+ Edition. 00 01 15 List of Drawing Sheets. Measured Drawing Information.

Equipment 45

Equipment Construction Schedule Concrete 45

Building Information Management

JULY 27, 2016

MasterFormat 2004 (and subsequent updates) is now composed of up to 8 digits (though many have expanded to 12+ digits) and 50 divisions at Level 1, “Sections” within each division, as well as four standard levels, and a user-defined fifth level. 2004+ Edition. 00 01 15 List of Drawing Sheets. Measured Drawing Information.

Equipment 40

Equipment Construction Schedule Concrete 40

Buisness Facilities Contributed Content

JULY 10, 2013

The tsunami of 2004 also comes to mind when we think of Thailand. Thailand is a richly nuanced country that draws tourists from every part of the globe but it offers even more than culture, relaxation and nightlife. A land of contrasts, we are told. I found myself marveling at the complexity of the kingdom.

Industrial 68

Industrial Zoning Office Products 68