Autodesk Construction Cloud

MAY 30, 2023

As SVP of Commercial Markets, Salla uses her expertise to advance the use of technology in the commercial sector to transform the built environment.  Originally from Finland, Salla holds a master’s in architecture and structural engineering. When dealing with pre-existing infrastructure –  renovations, retrofitting, etc.

Industrial 52

Industrial Construction Fabrication Innovation 52

Autodesk Construction Cloud

JANUARY 10, 2024

I learned a great deal about the whole BIM process there. We’re able to review the same documents simultaneously by several team members, adding comments by the project architects, interior designer, structure engineers and coordinators together without losing time. From then, there was no looking back.

BIM 119

BIM Management Design Autodesk 119

DebunkTheBIM

NOVEMBER 2, 2011

The structural engineer sizes the concrete column; the architect places it in the space. There is a code on the structural drawing that can be tracked to the schedule and the dimensions are noted. They both are confident to be following well established building-documenting practices.

Structural Engineering 48

Structural Engineering CAD BIM Modeling 48

Construction Cost Estimating

MAY 31, 2016

Trimble recently launched three new versions of its building information modeling (BIM) and analysis & design software like Tekla Structures 2016 , Tekla Structural Designer 2016 and Tekla Tedds 2016 for engineering and construction professionals.

Software 40

Software Software BIM Design 40

CivilJungle

JANUARY 19, 2021

It is also known as load and resistance factor design in structural engineering. The limit state method helps us to know the capacity load or working load of the structure. The motive of using the limit state method is to construct a safe and comfortable structure. If the structure is not used if it is not serviceable.

Design 52

Design Concrete Zoning Safety 52

Contractor Connection

APRIL 18, 2019

Many of the decisions that go into a home remodel or addition are not just design choices; they are structural engineering problems to solve. There is likely a great deal of space going unused. A garage can easily be converted for all those uses, plus so many more, and different choices will need to be made for each.

Remodeling 54

Remodeling Modeling Contractors IDEA 54

Revit OpEd

OCTOBER 23, 2015

Let's imagine a scenario where our structural engineer decides to mock-up a preliminary model but does so without the benefit of having the architectural model linked in yet. Only move the PBP un-clipped if you will rely on Shared Coordinates to deal with external model alignment in other applications.

Revit 40

Revit Modeling AutoCAD Structural Engineering 40

PSMJ Resources

JULY 8, 2008

Its engineering division also appears strong, thanks to a recent acquisition. The acquisition is the latest in a seemingly endless string of deals for Stantec, whose philosophy remains to acquire firms and bring them under the Stantec name. Stantec isn't the only Canadian megafirm to make an M&A deal.

Structural Engineering 40

Structural Engineering Deals Engineering Consulting 40

CivilJungle

JANUARY 20, 2021

What Is Foundation Engineering? Foundation Engineering is a branch of civil engineering which deals with the design and study of the foundation of the structure. Foundation , Part of a structural system that supports and anchors the superstructure of a building and transmits its loads directly to the earth.

Foundation 52

Foundation Concrete Maine Engineering 52

Natural Building

DECEMBER 24, 2019

She called up her structural engineer on an educational-building project and asked if they could swap out some of the cement in their mix for fly ash. Our number one job to get that first carbon dip is to deal with existing buildings.”. He was game to try it in the foundation. Another giant lever, of course, is public policy.

Materials 52

Materials Design Concrete Accounting 52

PSMJ Resources

APRIL 1, 2011

Each will present their firm’s unique approach to buying in a post-recession market, as well as how they determine strategic acquisition needs, how they identify suitable sellers, and their methods for negotiating deals. They’ll also be on-hand throughout the roundtable to offer their opinions and comments.

Liability 40

Liability Insurance Industrial Design 40

Construction Enquirer

JUNE 1, 2023

Integrated Health Projects has signed off a £100m deal with Derbyshire Healthcare Trust to design and build two 54-bed mental health facilities. Ryder Architecture designed the units along with Curtins Consulting as the structural engineer and CAD 21 as building services designer.

CAD 94

CAD Structural Engineering Resource Deals 94

Autodesk Construction Cloud

AUGUST 15, 2023

Her extensive experience in program management, risk assessment, and cost analysis has made her instrumental in expanding the Engineering, Procurement, and Construction Management (EPCM) Program for Pond. He is a natural self-driven team player and is always looking for opportunities to give back.

Autodesk 52

Autodesk Construction Innovation BIM 52

Rory Woolsey

FEBRUARY 9, 2012

Fit the job or don’t fit; a unit price line item is to be applied (remember we are dealing with public funds). Rory Woolsey has worked in Management and Engineering for the construction industry for 35 years, starting as a construction laborer in Billings, Montana, in 1972. For this cost estimator this was always uncomfortable.

Negotiation 45

Negotiation Estimating Contract Construction 45

Revit OpEd

OCTOBER 16, 2013

It''s a fairly common practice to create separate floors for structure and finishes. The structural "layer" of a floor may actually be modeled by the structural consultant, assuming the structural engineer we are working with uses Revit and isn''t working directly in the same model with us (architecture bias in this post).

Drawings 53

Drawings Revit Modeling Documentation 53

Rory Woolsey

APRIL 4, 2012

In the long run it is easier to put the time in up front to establish a correct budget then it is to deal with the project in a crisis mode as the job unfolds. Rory Woolsey has worked in Management and Engineering for the construction industry for 35 years, starting as a construction laborer in Billings, Montana, in 1972.

Estimating 45

Estimating Construction Overhead Software 45

DebunkTheBIM

JUNE 2, 2017

That wall will then (possibly by a structural engineer) chopped into pieces and the sizes determined. I know, this sounds loopy, even to me. Let’s try again. Think of a precast wall. Someone (likely an architect) will set out, that ‘a wall’ will be a precast type.

BIM 60

BIM Drawings Modeling DOT 60

Rory Woolsey

MAY 31, 2012

We deal with them all the time. Rory Woolsey has worked in Management and Engineering for the construction industry for 35 years, starting as a construction laborer in Billings, Montana, in 1972. Mr. Woolsey has earned a Bachelor of Science degree in Civil/ Structural Engineering and a Masters degree in Business Administration.

Estimating 40

Estimating Overhead Profitability Construction 40

Building Information Management

NOVEMBER 18, 2014

For some reason BIM authors (architects, engineers, etc) think that because they create the initial BIM information they have the right to full control and to charge for the BIM model throughout the life of the building. The architect doesn’t model ductwork, they use the mechanical engineer’s model.

BIM 40

BIM Modeling Drawings Agreement 40

Revit OpEd

FEBRUARY 4, 2011

Let's assume you decide to hire a structural engineer (and MEP) and they use Revit too. The engineers match up their levels and grids to yours using Copy/Monitor (most likely.or If you never deal with site you are all good to go. If you never deal with site you are all good to go. The MEP consultant does the same.

Revit 56

Revit Modeling Site Documentation 56

Rory Woolsey

FEBRUARY 16, 2012

Many of these contractors have expressed great frustration in dealing with the low bid multipliers and in-turn jocitization of proposals. When compared to accurate engineers’ budgetary estimates on these optimized and clean JOC contracts I have seen savings on the average of 5% to 10%. construction consultants.

Estimating 40

Estimating Bidding Negotiation Contract 40

CivilJungle

AUGUST 18, 2022

In architecture, an arch is an opening in a structure that is curved on top and designed to distribute weight. Arches are used in structural engineering (a branch of civil engineering that deals with large buildings and similar structures) because they can support a very large mass placed on top of them.

St. Louis 52

St. Louis Structural Engineering Site Architecture 52

Construction Cost Estimating

DECEMBER 3, 2015

RCM ACI-Builder Software is a simple tool for structural engineers to design several types of reinforced concrete members with adhering to ACI318M-11 code. This useful structural engineering software can produce comprehensive design output report involving complete formulas and explanatory figures.

Software 40

Software Software Concrete Design 40

CivilJungle

OCTOBER 4, 2020

We offer a wide range of construction materials which include specially engineered ready mix concrete products, AAC blocks, recycled concrete blocks, and pavers for different types of applications. Owing to our ethical business policies, crystal clear dealings, and client & quality centric approach. Methra Industries India Pvt Ltd.

Products 52

Products Concrete Infrastructure Green 52

Autodesk Construction Cloud

NOVEMBER 2, 2021

Sarah Watte , Phoenix Civil Engineering, Inc. Jonathon started as a Project Engineer at Barton Malow and worked his way up to Vice President in just 10 years. Giana started her career in civil and structural engineering, working on both domestic and international programs. Eoin Prunty , O’Mahony Pike Architects.

Construction 52

Construction BIM San Francisco Management 52

CivilJungle

OCTOBER 18, 2021

Then after architect consult with a structural engineer and MEP engineer for details of the reinforcements and other detail for use, how deep your foundation will be, the size of gravel to be used, column width, electrical, plumbing, etc. The condition of the contract ought to be thoroughly checked before signing a final deal.

Construction 98

Construction Foundation Electrical Drawings 98

Revit OpEd

APRIL 5, 2012

That could mean structural engineers are too smart for it, or just werent interested in a book, or that the authors, editors and publisher didnt do a good enough job marketing it, or that it just wasnt very good. Jeremy Deal. I used the revit structure book extensively, for a while. It was an excellent book.

Revit 53

Revit Autodesk Architecture Products 53

Construction Dive

MAY 26, 2009

Home Improvement Experts. -- Appliance Experts. -- Electrical Experts. -- Small Engine Experts. -- Plumbing Experts. -- UK Appliance Experts. -- HVAC Experts. -- UK Plumbing Experts. -- Small Appliance Experts. -- Pool and Spa Experts. -- Australia Whitegoods Experts. . -- Marine Electronics Experts. Computer Software Engineer.

Bankruptcy 73

Bankruptcy Software Software Equipment 73

Revit OpEd

APRIL 14, 2016

Autodesk Raytracer is now used for all rendering functions so the option to select a rendering engine has been removed. When you upgrade a model, the rendering settings that were specified for the NVIDIA mental ray engine are mapped as closely to the appropriate settings for the new engine as possible. has finally been tackled.

Revit 40

Revit Fabrication Schedule Modeling 40