Autodesk Construction Cloud

MARCH 1, 2022

Equip Your Staff with the Right Gear. Being transparent and accurate in documentation contributes to good communication among team members. Missing information and data can create hazards on a jobsite, and strong documentation practices reduce this risk. Equip Your Staff with the Right Gear. Choose the Right Tools.

Safety 98

Safety Construction Inspections Software 98

Autodesk Construction Cloud

NOVEMBER 16, 2022

Since Compass has multiple prototypical designs that utilize a kit of parts that are interchangeable from one prototype to another, neutralizing the interface for all long-lead equipment (like the power center) to avoid a disconnect between the pre-cast wall and the power center was critical. The solution was to “lean-up” the process.

Construction 52

Construction Schedule Design Products 52

Construction Specifier

JANUARY 31, 2022

“…nature makes people happier and healthier via our nontangible connections to ecosystems … the positive effects of nature on physiological health and mental health have been unequivocally documented.”. serves as chief engineer for GKD-USA, a leader in metal fabrics for architectural applications, based in Cambridge, Maryland.

Fabrication 72

Fabrication Environment Architecture Zoning 72

BD+C

APRIL 20, 2023

Trimble is not in the business of documenting historic landmarks. Our team agreed, the biggest challenges were the sweltering summer heat and tourist crowds, neither of which caused any issues for our equipment, just the humans! If a picture is worth a million words, a point cloud model is worth exponentially more.

Modeling 59

Modeling Los Angeles Comparison Fabrication 59

Constructonomics

OCTOBER 25, 2015

From adapted sheet metal to custom fabric buildings , the materials available to today’s contractor, builder, and architect would have been unrecognizable as building materials at all to the people who constructed the Sistine Chapel. However, there are some changes afoot that actually seem to be positive. New Materials.

News 120

News Industrial Construction Software 120

The Constructor

MARCH 19, 2012

Steel: Steel is also used in pre-fabricated formwork. Purpose made steel forms are fabricated when dimensional tolerances are critical, or when the forms are planned to be re-used. Aluminium: Often used in pre-fabricated formwork, that is put together on site. waffle floors).

Materials 136

Materials Concrete Fabrication Foundation 136

Construction Business Owner

MARCH 29, 2012

EQUIPMENT |. Equipment Management. Equipment and Services Directory. Until recently, those drawings were produced by hand, but in the last 25 years or so, computers have become the primary tool people use to produce construction documents. BIM & Pre-Fabrication. document management. MARKETING |.

Construction 120

Construction BIM Software Software 120

Building Information Management

JULY 2, 2012

Accompanying the technical documentation are instructions for creating the HVACie files using commercial design software. HVACie extends the existing Industry Foundation Class Coordination View including equipment and system information streamlining construction shop drawing and fabrication. er_exchange_HVAC_model[equipment].doc

Documentation 40

Documentation Equipment Modeling Design 40

Building Information Management

JULY 2, 2012

Accompanying the technical documentation are instructions for creating the HVACie files using commercial design software. HVACie extends the existing Industry Foundation Class Coordination View including equipment and system information streamlining construction shop drawing and fabrication. er_exchange_HVAC_model[equipment].doc

Documentation 40

Documentation Equipment Modeling Design 40

Construction Business Owner

FEBRUARY 6, 2012

EQUIPMENT |. Equipment Management. Equipment and Services Directory. The new equipment on display this year proved that manufacturers are in tune with these expectations. At the show, Honda Power Equipment announced the launch of the EB10000 Industrial Series—available in early summer 2012. document management.

Construction 120

Construction Software Software Accounting 120

Levelset

JUNE 3, 2022

For material suppliers and equipment lessors, the best practice is to send a bond claim within 30 days after the delivery of material has been completed. These requirements impact not only standard public construction projects, but also building service maintenance, repairs, and off-site fabrication of items for a project. Learn more.

Washington 52

Washington Claims Lien Contract 52

CivilJungle

MAY 28, 2021

Are lengthy delivery equipments involved? Step 1: Generate the Project: Generate a Project Initiation Document that defines the people, resources & budget. A construction plan is a sequence of documents, that describes the given project. What is the impact of the new project on the workload? How can we handle any overload?

Plans 52

Plans Construction BIM Permits 52

The Constructor

MARCH 19, 2012

Its importance is evident when you consider that the cost of fabrication, erecting and striking the formwork, often exceeds the cost of the concrete it is designed to shape and support. It can be handled safely and easily using the equipment available. Formwork usually needs to be used many times for it to be cost efficient.

Concrete 223

Concrete Foundation Materials Design 223

Autodesk Construction Cloud

JANUARY 20, 2022

Construction submittals are documents provided by a contractor to an architect for an approval of use. The submittal log includes information provided to the architect asking for approval for certain materials and equipment before they’re fabricated and sent to the project site. What is a submittal?

Construction 98

Construction Documentation Project Management Materials 98

Autodesk Construction Cloud

SEPTEMBER 9, 2021

Ivana shares how Mace saved 50% of their time spent on coordination and reporting by using BIM 360 Document Management and Model Coordination. How you approach the preconstruction phase—which involves ironing out your plans, designs, and documentation—can make or break the ease in which you move through a project.

Autodesk 52

Autodesk Construction BIM Modeling 52

The Constructor

NOVEMBER 7, 2011

Reinforcement was fabricated and fixed along with post tensioned mono strands (encased in HDPE pipe) to profile. After fabricating and fixing shuttering in position, micro concrete encasement was carried out throughout the core holes in the slab. End anchors of post tensioned strands were fixed in position.

Concrete 152

Concrete Foundation Materials Design 152

The Constructor

NOVEMBER 19, 2011

2) poor communication between the fabricators and erectors. (3) The most common causes of structural failures are: (1) Poor communication between the various design professionals involved, e.g. engineers involved in conceptual design and those involved in the supervision of execution of works. (2)

Concrete 177

Concrete Foundation Engineering Design 177

Job Order Contracting

DECEMBER 13, 2020

Throughout the ongoing process, however, all of the following are address and/or improved upon: Who can offer change ideas (informally and formally) Who assesses the impact of the proposed change Who reviews the proposed change and its impact for approval How is the change implemented Documentation of the outcome. enables full visibility.

Project Management 162

Project Management Capterra Organization Management 162

BD+C

MARCH 11, 2024

By broadening design to anticipate construction issues and delivering a fabrication-ready model, engineers can create more certainty in cost, schedule, and design intent. In general, the higher LOD numeric value, the further along that element is on the spectrum from concept to fabrication ready.

BIM 59

BIM Design Fabrication Modeling 59

The Constructor

NOVEMBER 11, 2011

The displacement can be computed as ……………. (1) In such cases, applying the principle of virtual work, ………………….2(a) 2(a) Where, = change in length of member k, = change in thermal expansion of member K = change in temperature.

Concrete 128

Concrete Foundation Structural Engineering Materials 128

The Constructor

AUGUST 23, 2012

The metal should have good workability but also keep its strength during fabrication. The metal should normally be specified from standard widths and thickness. Non standard materials are difficult to purchase and also very expensive. Green part in the drawing represent restraint fixing and blue part as load bearing fixing.

Concrete 124

Concrete Foundation Materials Design 124

Construction Cost Estimating

NOVEMBER 14, 2011

Estimating enables manufacturers, including fabricating and machining shops, to quickly and accurately estimate cycle times and costs based on your equipment and shop rates. Understand your resources and their cost to you – material suppliers, labor force, subcontractors, construction equipment, indirect costs, and management.

Estimating 49

Estimating Software Software Contractors 49

Safety Services Company

NOVEMBER 26, 2012

Part 12, Tools, Machinery and Equipment. This amendment will ensure that the regulation applies to hand-fed circular saws equipped with any type of blade, rather than only to those with rip-type teeth. Part 12, Tools, Machinery and Equipment; and consequential amendments to Part 23, Oil and Gas. Part 16, Mobile Equipment.

Safety 49

Safety Regulation Equipment Roads 49

The Constructor

NOVEMBER 21, 2011

Wet covers, such as straw, earth, burlap, cotton mats, and other moisture-retaining fabrics, are used extensively in curing concrete. You can apply them with spray equipment, such as hand-operated pressure sprayers, to odd slab widths or shapes of fresh concrete, and to exposed concrete surfaces following form removal.

Concrete 189

Concrete Foundation Materials Design 189

Autodesk Construction Cloud

JANUARY 4, 2022

Some of the standard “tools” of construction now include mobile construction software and document management systems and disruptive technology like robotics and 3D printing. Electricians are responsible for designing, installing, and maintaining the wiring and equipment through which electricity flows in all types of facilities.

Construction 52

Construction Industrial Engineering Statistics 52

Building Information Management

FEBRUARY 23, 2015

Construction delivery methods and their associated processes and contractual documents are directly linked to the success or failure of any project. The benefits include centralized and visual communication, early exploration of options, sustainability, efficient design, integration of disciplines, site control, as built documentation, etc.

BIM 40

BIM Environment Management Life Cycle 40

BD+C

SEPTEMBER 15, 2023

We like to rely on local artisans, resources, and suppliers for as much of the FF&E (furniture, fixture and equipment) and materials as possible so that we can reduce the emissions cost associated with transporting materials from other parts of the world. Givone points out that local resources play a significant role in accomplishing this. “We

Sustainability 52

Sustainability Materials Environment Green 52

Autodesk Construction Cloud

NOVEMBER 5, 2021

I was afforded the ability to utilize all of the beautiful music equipment I have collected over the years and my limited knowledge of video creation and editing. I’m doing a lot of the training and tons of research and documentation, but I believe that the future would be similar to how Revit developed.

BIM 52

BIM Autodesk US Products 52

Safety Services Company

FEBRUARY 12, 2014

Possible systems include a fabricated wood rail, and a c-clamp guardrail system. OSHA is not going to approve or endorse a specific plan, but warns that working conditions and changing or incorrectly applying equipment, service or system can easily create a hazardous condition. Does maintenance have to be trained on new equipment?

OSHA 48

OSHA Regulation Safety Inspections 48

Building Information Management

JUNE 6, 2013

SectionFormat has a home for the specification of performance and design criteria of products, which in turn are defined as including systems, assemblies, manufactured units, equipment, components, product types and materials. Fabric example. 23-50-00 Central heating equipment. 23-60-00 Central cooling equipment.

BIM 40

BIM Commissioning Procurement Products 40

Pro Builder

AUGUST 6, 2021

LG’s 24-inch Styler, a steam clothing care system, refreshes clothing between dry cleanings, reduces odors, and is safe to use on more than 15 fabrics, including wool, sequins, and linens. The Stair Supplies Design Kit from Viewrail boasts it can deliver floating stairs more affordably than a local fabricator. Steam clothing care / LG.

Products 98

Products Electrical Design Chief Architect 98

Buisness Facilities Contributed Content

APRIL 15, 2014

Industrial Revenue Bonds: May be used as long-term financing of up to 100% of a project for: Acquisition of land, buildings, site preparation and improvements; Construction of buildings; Acquisition and installation of furnishings, fixtures and equipment; Capitalizable soft costs (e.g., Pollution control equipment.

Income 108

Income Finance Zoning Employment 108

Buisness Facilities Contributed Content

JUNE 16, 2016

With a focus on food, beverage, ingredient, equipment and packaging makers, the organization works to raise industry awareness and capacity for growth and advancement, from farm to factory to fork. FaB Wisconsin , the state’s food and beverage industry cluster organization, helps bring together key stakeholders to spur the industry’s growth.

Wisconsin 50

Wisconsin Industrial Milwaukee Innovation 50

Construction Marketing

OCTOBER 8, 2015

Businesses would be wise to equip workers with devices, like handheld radios or headsets, which allow fast and efficient communication among team members. Documentation. Proper Equipment. Construction workers equipped with improper gear are bound to make fatal errors. Supervision.

Accidents 120

Accidents Safety Site Equipment 120

Buisness Facilities Contributed Content

MARCH 21, 2014

INDUSTRIAL REVENUE BONDS: May be used as long-term financing of up to 100 percent of a project for: Acquisition of land, buildings, site preparation and improvements; Construction of buildings; Acquisition and installation of furnishings, fixtures and equipment; Capitalizable soft costs (e.g., The program ends December 2016.

Income 75

Income Finance Zoning Equipment 75

Contractor Bookkeeping

MARCH 13, 2014

During the early part of 2011 we invested thousands of dollars in salaries, equipment, hardware and software to plan, implement and test technology processes that would make it easy for contractors like you all across the U.S.A. to hire us. 20% of them generated results that broke even. Each page of paper you print costs roughly $0.50

Accounting 48

Accounting Construction Contractors Profitability 48

Revit OpEd

APRIL 14, 2016

BIG STUFF New Features Videos - Start with these videos provided as part of the help documentation if you prefer watching videos to reading my blog post. Steel Connections for Revit - This is similar conceptually to what has been done for MEP Fabrication. Okay, on to the list! has finally been tackled.

Revit 40

Revit Fabrication Schedule Modeling 40